|
102.
|
|
|
Some new hard drives include a feature that parks the drive heads after a short period of inactivity. This is a power-saving feature, but it can have a bad interaction with the operating system that results in the drive constantly parked then activated. This produces excess wear on the drive, potentially leading to early failures.
|
|
|
description
|
|
|
|
Néhány új merevlemez képes az író-olvasó fejet parkoltatni rövid inaktivitás után. Ez egy energiatakarékos funkció, de az operációs rendszer rosszul kezelheti, ami folyamatos parkoltatást és aktiválást eredményezhet. Ez különösen nagy terhelést jelent a merevlemezre, korai meghibásodáshoz vezethet.
|
|
Translated by
Gábor Udvari
|
|
Reviewed by
Gabor Kelemen
|
|
|
|
Located in
../jobs/disk.txt.in:82
|
|
103.
|
|
|
PURPOSE:
This test will check the system can detect the insertion of an eSATA HDD
STEPS:
1. Click 'Test' to begin the test. This test will
timeout and fail if the insertion has not been detected within 20 seconds.
2. Plug an eSATA HDD into an available eSATA port.
VERIFICATION:
The verification of this test is automated. Do not change the automatically
selected result
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
CÉL:
Ez a teszt ellenőrzi, hogy a rendszer felismeri-e egy eSATA merevlemez csatlakoztatását
LÉPÉSEK:
1. Kattintson a „Teszt” gombra az ellenőrzés megkezdéséhez. Ez a teszt
le fog járni, ha a csatlakoztatást 20 másodpercen belül nem érzékeli a rendszer.
2. Csatlakoztassa az eSATA merevlemezt egy szabad eSATA porthoz.
ELLENŐRZÉS:
A teszt ellenőrzése automatikusan történik. Ne változtassa meg az automatikusan kijelölt eredményt.
|
|
Translated by
Gabor Kelemen
|
|
|
|
Located in
../jobs/esata.txt.in:4
|
|
104.
|
|
|
This is an automated test which performs read/write operations on an attached eSATA HDD
|
|
|
description
|
|
|
|
Automatikus teszt, amely írási és olvasási műveleteket hajt végre a csatlakoztatott eSATA merevlemezen
|
|
Translated by
Gabor Kelemen
|
|
|
|
Located in
../jobs/esata.txt.in:20
|
|
105.
|
|
|
PURPOSE:
This test will check the system can detect the removal of an eSATA HDD
STEPS:
1. Click 'Test' to begin the test. This test will timeout and fail if
the removal has not been detected within 20 seconds.
2. Remove the previously attached eSATA HDD from the eSATA port.
VERIFICATION:
The verification of this test is automated. Do not change the automatically
selected result
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
CÉL:
Ez a teszt ellenőrzi, hogy a rendszer felismeri-e egy eSATA merevlemez leválasztását
LÉPÉSEK:
1. Kattintson a „Teszt” gombra az ellenőrzés megkezdéséhez. Ez a teszt le fog járni ha
a leválasztást 20 másodpercen belül nem érzékeli a rendszer.
2. Húzza ki a korábban csatlakoztatott eSATA merevlemezt az eSATA portból.
ELLENŐRZÉS:
A teszt ellenőrzése automatikusan történik. Ne változtassa meg az automatikusan kijelölt eredményt.
|
|
Translated by
Gabor Kelemen
|
|
|
|
Located in
../jobs/esata.txt.in:28
|
|
106.
|
|
|
PURPOSE:
This will verify that an ExpressCard slot can detect inserted devices.
STEPS:
Skip this test if you do not have an ExpressCard slot.
1. Plug an ExpressCard device into the ExpressCard slot
VERIFICATION:
Was the device correctly detected?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/expresscard.txt.in:3
|
|
107.
|
|
|
PURPOSE:
This test will verify that a fingerprint reader will work properly for logging into your system. This test case assumes that there's a testing account from which test cases are run and a personal account that the tester uses to verify the fingerprint reader
STEPS:
1. Click on the User indicator on the left side of the panel (your user name).
2. Select "Switch User Account"
3. On the LightDM screen select your username.
4. Use the fingerprint reader to login.
5. Click on the user switcher applet.
6. Select the testing account to continue running tests.
VERIFICATION:
Did the authentication procedure work correctly?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/fingerprint.txt.in:3
|
|
108.
|
|
|
PURPOSE:
This test will verify that a fingerprint reader can be used to unlock a locked system.
STEPS:
1. Click on the Session indicator (Cog icon on the Left side of the panel) .
2. Select 'Lock screen'.
3. Press any key or move the mouse.
4. A window should appear that provides the ability to unlock either typing your password or using fingerprint authentication.
5. Use the fingerprint reader to unlock.
6. Your screen should be unlocked.
VERIFICATION:
Did the authentication procedure work correctly?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
CÉL:
Ez a teszt ellenőrzi, hogy az ujjlenyomat-olvasó képes-e feloldani a lezárt rendszert
LÉPÉSEK:
1. Kattintson a rendszer indikátorra (fogaskerék ikon a panel jobb oldalán).
2. Válassza a „Képernyő zárolása” menüpontot.
3. Nyomjon le egy billentyűt, vagy mozgassa az egeret.
4. Megjelenik egy ablak, amelyben lehetősége lesz a jelszava begépelésével vagy az ujjlenyomatával azonosítania magát.
5. Használja az ujjlenyomat-olvasót a feloldáshoz.
6. A képernyő feloldódik.
ELLENŐRZÉS:
Megfelelően működött az azonosítási eljárás?
|
|
Translated by
Gabor Kelemen
|
|
|
|
Located in
../jobs/fingerprint.txt.in:18
|
|
109.
|
|
|
PURPOSE:
This test will check the system can detect the insertion of a FireWire HDD
STEPS:
1. Click 'Test' to begin the test. This test will
timeout and fail if the insertion has not been detected within 20 seconds.
2. Plug a FireWire HDD into an available FireWire port.
VERIFICATION:
The verification of this test is automated. Do not change the automatically
selected result
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
CÉL:
Ez a teszt ellenőrzi, hogy a rendszer felismeri-e egy FireWire merevlemez csatlakoztatását
LÉPÉSEK:
1. Kattintson a „Teszt” gombra az ellenőrzés megkezdéséhez. Ez a teszt
le fog járni, ha a csatlakoztatást 20 másodpercen belül nem érzékeli a rendszer.
2. Csatlakoztassa a FireWire merevlemezt egy szabad FireWire porthoz.
ELLENŐRZÉS:
A teszt ellenőrzése automatikusan történik. Ne változtassa meg az automatikusan kijelölt eredményt.
|
|
Translated by
Gabor Kelemen
|
|
|
|
Located in
../jobs/firewire.txt.in:4
|
|
110.
|
|
|
This is an automated test which performs read/write operations on an attached FireWire HDD
|
|
|
description
|
|
|
|
Automatikus teszt, amely írási és olvasási műveleteket hajt végre a csatlakoztatott FireWire merevlemezen
|
|
Translated and reviewed by
Gabor Kelemen
|
|
|
|
Located in
../jobs/firewire.txt.in:20
|
|
111.
|
|
|
PURPOSE:
This test will check the system can detect the removal of a FireWire HDD
STEPS:
1. Click 'Test' to begin the test. This test will timeout and fail if
the removal has not been detected within 20 seconds.
2. Remove the previously attached FireWire HDD from the FireWire port.
VERIFICATION:
The verification of this test is automated. Do not change the automatically
selected result
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
CÉL:
Ez a teszt ellenőrzi, hogy a rendszer felismeri-e egy FireWire merevlemez leválasztását
LÉPÉSEK:
1. Kattintson a „Teszt” gombra az ellenőrzés megkezdéséhez. Ez a teszt le fog járni ha
a leválasztást 20 másodpercen belül nem érzékeli a rendszer.
2. Húzza ki a korábban csatlakoztatott FireWire merevlemezt a FireWire portból.
ELLENŐRZÉS:
A teszt ellenőrzése automatikusan történik. Ne változtassa meg az automatikusan kijelölt eredményt.
|
|
Translated by
Gabor Kelemen
|
|
|
|
Located in
../jobs/firewire.txt.in:28
|