|
17.
|
|
|
PURPOSE:
This test will check that recording sound using the onboard microphone works correctly
STEPS:
1. Disconnect any external microphones that you have plugged in
2. Click "Test", then speak into your internal microphone
3. After a few seconds, your speech will be played back to you.
VERIFICATION:
Did you hear your speech played back?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
目的:
這個測試將會檢查內建的麥克風是否正常運作 (將用內建的麥克風錄下一段聲音)
步驟:
1. 如果您已經接上的外接的麥克風,請先移除
2. 點擊「測試」按鈕,然後對著內建的麥克風講一段話
3. 您剛剛講的話將透過喇叭播放出來
檢查:
您是否有聽到自己剛剛被錄下來的話
|
|
Translated and reviewed by
Po-Hsu Lin
|
In upstream: |
|
目的:
這個測試會檢查內建的麥克風是否正常運作(用內建的麥克風錄下一段聲音)
步驟:
1. 如果已經接上外接麥克風,請先移除
2. 點擊『測試』按鈕,然後對著內建的麥克風講一段話
3. 您剛剛講的話將透過喇叭播放出來
檢查:
您是否有聽到自己剛剛錄下來的話?
|
|
|
Suggested by
Walter Cheuk
|
|
|
|
Located in
../jobs/audio.txt.in:97
|
|
18.
|
|
|
PURPOSE:
This test will check that recording sound using an external microphone works correctly
STEPS:
1. Connect a microphone to your microphone port
2. Click "Test", then speak into the external microphone
3. After a few seconds, your speech will be played back to you
VERIFICATION:
Did you hear your speech played back?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
目的:
這個測試將會檢查外接的麥克風是否正常運作 (將用外接的麥克風錄下一段聲音)
步驟:
1. 將外接的麥克風連接到電腦
2. 點擊「測試」按鈕,然後對著外接的麥克風講一段話
3. 您剛剛講的話將透過喇叭播放出來
檢查:
您是否有聽到自己剛剛被錄下來的話
|
|
Translated and reviewed by
Po-Hsu Lin
|
In upstream: |
|
目的:
這個測試會檢查外接的麥克風是否正常運作(用外接的麥克風錄下一段聲音)
步驟:
1. 將外接的麥克風連接到電腦
2. 點擊『測試』按鈕,然後對著外接的麥克風講一段話
3. 您剛剛講的話將透過喇叭播放出來
檢查:
您是否有聽到自己剛剛錄下來的話?
|
|
|
Suggested by
Walter Cheuk
|
|
|
|
Located in
../jobs/audio.txt.in:117
|
|
19.
|
|
|
PURPOSE:
This test will check that a USB audio device works correctly
STEPS:
1. Connect a USB audio device to your system
2. Click "Test", then speak into the microphone
3. After a few seconds, your speech will be played back to you
VERIFICATION:
Did you hear your speech played back through the USB headphones?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
目的:
這個測試將會檢查 USB 音效裝置是否正常運作
步驟:
1. 將 USB 音效裝置連接到電腦
2. 點擊「測試」按鈕,然後對著 USB 音效裝置的麥克風講一段話
3. 您剛剛講的話將透過喇叭播放出來
檢查:
您是否有聽到自己剛剛被錄下來的話
|
|
Translated and reviewed by
Po-Hsu Lin
|
In upstream: |
|
目的:
這個測試會檢查 USB 音效裝置是否正常運作
步驟:
1. 將 USB 音效裝置連接到電腦
2. 點擊『測試』按鈕,然後對著 USB 音效裝置的麥克風講一段話
3. 您剛剛講的話將透過喇叭播放出來
檢查:
您是否有聽到自己剛剛錄下來的話?
|
|
|
Suggested by
Walter Cheuk
|
|
|
|
Located in
../jobs/audio.txt.in:135
|
|
20.
|
|
|
Play back a sound on the default output and listen for it on the default input.
|
|
|
description
|
|
|
|
在預設輸出上播放一段聲音,並於預設輸入裝置上聆聽這段聲音。
|
|
Translated and reviewed by
Po-Hsu Lin
|
|
|
|
Located in
../jobs/audio.txt.in:149
|
|
21.
|
|
|
Collect audio-related system information. This data can be used to simulate this computer's audio subsystem and perform more detailed tests under a controlled environment.
|
|
|
description
|
|
|
|
收集音效相關的系統資訊。這些資料可以用來模擬這台電腦的音效子系統並在受控環境下進行更詳細的檢查。
|
|
Translated and reviewed by
Po-Hsu Lin
|
|
|
|
Located in
../jobs/audio.txt.in:165
|
|
22.
|
|
|
Attaches the audio hardware data collection log to the results.
|
|
|
description
|
|
|
|
將音效硬體資料附加至測試結果中
|
|
Translated and reviewed by
Po-Hsu Lin
|
|
|
|
Located in
../jobs/audio.txt.in:175
|
|
23.
|
|
|
PURPOSE:
Check that the various audio channels are working properly
STEPS:
1. Click the Test button
VERIFICATION:
You should clearly hear a voice from the different audio channels
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
目的:
檢查不同的聲道是否有正常運作
步驟:
1. 按下「測試」按鈕
檢查:
你應該會聽到音效由不同的聲道中播出
|
|
Translated and reviewed by
Po-Hsu Lin
|
|
|
|
Located in
../jobs/audio.txt.in:182
|
|
24.
|
|
|
This test will verify that the volume levels are at an acceptable level on your local system. The test will validate that the volume is greater than or equal to minvol and less than or equal to maxvol for all sources (inputs) and sinks (outputs) recognized by PulseAudio. It will also validate that the active source and sink are not muted. You should not manually adjust the volume or mute before running this test.
|
|
|
description
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/audio.txt.in:185
|
|
25.
|
|
|
PURPOSE:
Check that external line out connection works correctly
STEPS:
1. Insert cable to speakers (with built-in amplifiers) on the line out port
2. Open system sound preferences, 'Output' tab, select 'Line-out' on the connector list. Click the Test button
3. On the system sound preferences, select 'Internal Audio' on the device list and click 'Test Speakers' to check left and right channel
VERIFICATION:
1. Do you hear a sound in the speakers? The internal speakers should *not* be muted automatically
2. Do you hear the sound coming out on the corresponding channel?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
目的:
檢查輸出至其他裝置 (Line-Out) 音源連接埠是否有正常運作
步驟:
1. 將音源線從有內建放大器的喇叭接到電腦上輸出至其他裝置 (Line-Out) 的音源連接埠
2. 打開系統音效設定,於「輸出」頁籤的裝置列表中選擇「輸出至其他裝置 (Line-Out)」,然後按下「測試」按鈕
3. 同樣於此頁籤中,選擇「內建音效」裝置並按下「測試聲音」來檢查左右聲道
檢查:
1. 您有聽到來自外接喇叭的聲音嗎?內建喇叭應該*不會*自動被靜音
2. 您有聽到聲音從相對應的聲道中播出嗎?
|
|
Translated and reviewed by
Po-Hsu Lin
|
|
|
|
Located in
../jobs/audio.txt.in:208
|
|
26.
|
|
|
PURPOSE:
Check that external line in connection works correctly
STEPS:
1. Use a cable to connect the line in port to an external line out source.
2. Open system sound preferences, 'Input' tab, select 'Line-in' on the connector list. Click the Test button
3. After a few seconds, your recording will be played back to you.
VERIFICATION:
Did you hear your recording?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
目的:
檢查自其他裝置輸入 (Line-In) 音源連接埠是否有正常運作
步驟:
1. 連接外部音源與電腦上的自其他裝置輸入 (Line-In) 音源連接埠
2. 打開系統音效設定,於「輸入」頁籤的裝置列表中選擇「自其他裝置輸入 (Line-In) 」並按下「測試」按鈕
3. 幾秒鐘後,電腦將會播放自外部音源錄下的聲音
檢查:
您有聽到自外部音源錄下的聲音嗎?
|
|
Translated and reviewed by
Po-Hsu Lin
|
|
|
|
Located in
../jobs/audio.txt.in:228
|