Browsing Khmer translation

26.

PURPOSE:
Check that external line in connection works correctly
STEPS:
1. Use a cable to connect the line in port to an external line out source.
2. Open system sound preferences, 'Input' tab, select 'Line-in' on the connector list. Click the Test button
3. After a few seconds, your recording will be played back to you.
VERIFICATION:
Did you hear your recording?

27.

PURPOSE:
Check that balance control works correctly on internal speakers
STEPS:
1. Check that moving the balance slider from left to right works smoothly
2. Click the Test button to play an audio tone for 10 seconds.
3. Move the balance slider from left to right and back.
4. Check that actual speaker audio balance follows your setting.
VERIFICATION:
Does the slider move smoothly, as well as being followed by the setting by the actual audio output?

28.

PURPOSE:
Check that balance control works correctly on external headphone
STEPS:
1. Check that moving the balance slider from left to right works smoothly
2. Click the Test button to play an audio tone for 10 seconds.
3. Move the balance slider from left to right and back.
4. Check that actual headphone audio balance follows your setting.
VERIFICATION:
Does the slider move smoothly, as well as being followed by the setting by the actual audio output?

29.

Benchmark for each disk

30.

Run gtkperf to make sure that GTK based test cases work

31.

Run Render-Bench XRender/Imlib2 benchmark

32.

Run Qgears2 XRender Extension gearsfancy benchmark

33.

Run Qgears2 XRender Extension image scaling benchmark

34.

Run Qgears2 OpenGL gearsfancy benchmark

35.

Run Qgears2 OpenGL image scaling benchmark