Browsing Chinese (Simplified) translation

Don't show this notice anymore
Before translating, be sure to go through Ubuntu Translators instructions and Chinese (Simplified) guidelines.

These translations are shared with Checkbox trunk series template checkbox.

178187 of 678 results
178.
PURPOSE:
Validate that the battery LED indicated low power
STEPS:
1. Let system run on battery for several hours
2. Monitor battery LED carefully
VERIFICATION:
Does the LED light orange when battery is low?
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
目的:
验证电源指示灯是否提示低电量
步骤:
1. 让您的系统使用电池运行几个小时
2. 仔细观察电池指示灯
验证:
电池低电量时,电源指示灯是否显示橘色?
Translated by YunQiang Su
Located in ../jobs/led.txt.in:59
179.
PURPOSE:
HDD LED verification
STEPS:
1. Select "Test" to write and read a temporary file for a few seconds
2. HDD LED should light when writing to/reading from HDD
VERIFICATION:
Did the HDD LED light?
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
目的:
硬盘指示灯确认
步骤:
1. 选择 “测试”,花几秒钟写入和读取一个临时文件
2. 向硬盘写入或从硬盘读取时,硬盘指示灯应该点亮
验证:
硬盘指示灯是否点亮?
Translated by YunQiang Su
Located in ../jobs/led.txt.in:71
180.
PURPOSE:
Numeric keypad LED verification
STEPS:
1. Press "Block Num" key to toggle numeric keypad LED
2. Click on the "Test" button to open a window to verify your typing
3. Type using the numeric keypad both when the LED is on and off
VERIFICATION:
1. Numeric keypad LED status should toggle everytime the "Block Num" key is pressed
2. Numbers should only be entered in the keyboard verification window when the LED is on
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
目的:
数字键盘指示灯确认
步骤:
1. 按 “Block Num/Num Lock” 按键切换数字键盘指示灯
2. 点击 “测试” 按钮打开窗口确认您的录入
3. 当指示灯亮和熄灭时,使用数字键盘录入
验证:
1. 当每次 “Block Num/Num Lock” 被按下时,数字键盘状态都应该切换
2. 只有当指示灯亮时,键盘确认窗口中才能输入数字
Translated by YunQiang Su
Located in ../jobs/led.txt.in:83
181.
PURPOSE:
Block cap keys LED verification
STEPS:
1. Press "Block Cap Keys" to activate/deactivate cap keys blocking
2. Cap Keys LED should be switched on/off every time the key is pressed
VERIFICATION:
Did the Cap Keys LED light as expected?
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
目的:
大写锁定键指示灯验证
步骤:
1. 按 “大写锁定键”激活或取消激活大写锁定键
2. 每次按下按键时,大写锁定键指示灯应该亮起或熄灭
验证:
大写锁定键指示灯是否正常工作?
Translated by YunQiang Su
Located in ../jobs/led.txt.in:96
182.
PURPOSE:
WLAN LED verification
STEPS:
1. Make sure WLAN connection is established
2. WLAN LED should light
3. Select Test to open Firefox
4. WLAN LED should flash while downloading data
VERIFICATION:
Did the WLAN LED light and flash as expected?
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
(no translation yet)
Located in ../jobs/led.txt.in:87
183.
PURPOSE:
Validate that WLAN LED shuts off when disabled
STEPS:
1. Connect to AP
2. Use Physical switch to disable WLAN
3. Re-enable
4. Use Network-Manager to disable WLAN
VERIFICATION:
Did the LED turn off then WLAN is disabled?
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
(no translation yet)
Located in ../jobs/led.txt.in:101
184.
PURPOSE:
Validate that the Bluetooth LED turns on and off when BT is enabled/disabled
STEPS:
1. Switch bluetooth off from a hardware switch (if present)
2. Switch bluetooth back on
3. Switch bluetooth off from the panel applet
4. Switch bluetooth back on
VERIFICATION:
Did the bluetooth LED turn off and on twice?
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
目的:
当蓝牙被启用或禁用时,检验蓝牙指示灯是否亮起或熄灭
步骤:
1. 从硬件开关关闭蓝牙(如果存在)
2. 重新开启蓝牙
3. 从面板程序关闭蓝牙
4. 重新开启蓝牙
验证:
蓝牙指示灯是否连续两次亮起然后熄灭?
Translated by YunQiang Su
Located in ../jobs/led.txt.in:134
185.
PURPOSE:
Camera LED verification
STEPS:
1. Select Test to activate camera
2. Camera LED should light for a few seconds
VERIFICATION:
Did the camera LED light?
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
目的:
摄像头指示灯确认
步骤:
1. 选择 “测试” 激活摄像头
2. 摄像头指示灯应该亮几秒钟
验证:
摄像头指示灯是否点亮?
Translated by YunQiang Su
Located in ../jobs/led.txt.in:149
186.
PURPOSE:
Touchpad LED verification
STEPS:
1. Click on the touchpad button or press key combination to enable/disable touchpad button
2. Slide your finger on the touchpad
VERIFICATION:
1. Touchpad LED status should toggle everytime the button is clicked or the key combination is pressed
2. When the LED is on, the mouse pointer should move on touchpad usage
3. When the LED is off, the mouse pointer should not move on touchpad usage
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
目的:
触控板指示灯确认
步骤:
1. 单击触控板按钮或按下组合键启用或禁用触控板按钮
2. 在触控板上滑动您的手指
验证:
1. 每次单击触控板按钮或按下组合键时,触控板指示灯状态应该都会切换
2. 指示灯亮起时,鼠标指针应该可以通过触控板移动
3. 指示灯熄灭时,鼠标指针不可以通过到触控板移动
Translated by YunQiang Su
Located in ../jobs/led.txt.in:160
187.
PURPOSE:
Wireless (WLAN + Bluetooth) LED verification
STEPS:
1. Make sure WLAN connection is established and Bluetooth is enabled.
2. WLAN/Bluetooth LED should light
3. Switch WLAN and Bluetooth off from a hardware switch (if present)
4. Switch them back on
5. Switch WLAN and Bluetooth off from the panel applet
6. Switch them back on
VERIFICATION:
Did the WLAN/Bluetooth LED light as expected?
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
目的:
无线(WLAN + 蓝牙)指示灯确认
步骤:
1. 确保 WLAN 连接已建立以及蓝牙已启用。
2. WLAN 以及蓝牙指示灯应该亮起
3. 从硬件开关关闭 WLAN 以及蓝牙(如果存在)
4. 重新打开
5. 从面板程序关闭 WLAN 以及蓝牙
6. 重新打开
验证:
WLAN 以及蓝牙指示灯是否行为正常?
Translated by YunQiang Su
Located in ../jobs/led.txt.in:173
178187 of 678 results

This translation is managed by Ubuntu Simplified Chinese Translators, assigned by Ubuntu Translators.

You are not logged in. Please log in to work on translations.

Contributors to this translation: Aron Xu, Azrael Green, Careone, Carlos Gong, Dingyuan Wang, Fenghua Wang, Guanglin Du, HarryCheng, Heling Yao, Jimmy Xu, John Lu, Lele Long, Lephix, Litsbu Young, Luo Lei, Ma Jun, Qianqian Fang, Qiu Haoyu, Robin Lee, Roy, Tao Wei, Wbx20000, Wenzhen.du, Wylmer Wang, Xiaoyao, YunQiang Su, huangzhongbo, ichaochao, jiaowen520li, liz, luctoy, peaceman, prongs, qin_sx, 朱涛.