|
22.
|
|
|
PURPOSE:
Check that the various audio channels are working properly
STEPS:
1. Click the Test button
VERIFICATION:
You should clearly hear a voice from the different audio channels
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
ZWECK:
Dieser Test überprüft, ob die verschiedenen Audio-Kanäle korrekt funktionieren.
DURCHFÜHRUNG:
1. Klicken Sie auf »Testen«.
ÜBERPRÜFUNG:
Sie sollten deutlich eine Stimme über die verschiedenen Audio-Kanäle hören.
|
|
Translated and reviewed by
Dennis Baudys
|
|
|
|
Located in
../jobs/audio.txt.in:182
|
|
23.
|
|
|
This test will verify that the volume levels are at an acceptable level on your local system. The test will validate that the volume is greater than or equal to minvol and less than or equal to maxvol for all sources (inputs) and sinks (outputs) recognized by PulseAudio. It will also validate that the active source and sink are not muted. You should not manually adjust the volume or mute before running this test.
|
|
|
description
|
|
|
|
Dieser Test überprüft, ob sich die Lautstärkeeinstellungen für Ihr lokales System in einem akzeptablen Bereich befinden. Der Test überprüft für alle Audio-Quellen (Eingaben) und Audio-Sinks (Ausgaben), die von PulseAudio erkannt wurden, ob die jeweilige Lautstärke größer oder gleich »minvol« und kleiner oder gleich »maxvol« ist. Außerdem wird geprüft, ob die aktive Audio-Quelle und das aktive Audio-Sink nicht stumm geschaltet sind. Bevor dieser Test ausgeführt wird, sollten Sie nicht die Lautstärke oder Stummschaltung manuell verändern.
|
|
Translated and reviewed by
Dennis Baudys
|
|
|
|
Located in
../jobs/audio.txt.in:185
|
|
24.
|
|
|
PURPOSE:
Display Port audio interface verification
STEPS:
1. Plug an external Display Port device with sound
2. Open system sound preferences
3. Click on Output and Select Display Port
4. Run sound test
VERIFICATION:
Did you hear a sound?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
ZWECK:
Überprüfung der »Display Port«-Audio-Schnittstelle
DURCHFÜHRUNG:
1. Stecken Sie ein externes »Display Port«-Gerät mit Ton an.
2. Öffnen Sie die Audio-Einstellungen.
3. Klicken Sie auf Ausgang und wählen Sie »Display Port« aus.
4. Führen Sie den Sound-Test aus.
ÜBERPRÜFUNG:
Haben Sie den Ton gehört?
|
|
Translated and reviewed by
Carsten Gerlach
|
|
|
|
Located in
../jobs/audio.txt.in:178
|
|
25.
|
|
|
PURPOSE:
Check that external line out connection works correctly
STEPS:
1. Insert cable to speakers (with built-in amplifiers) on the line out port
2. Open system sound preferences, 'Output' tab, select 'Line-out' on the connector list. Click the Test button
3. On the system sound preferences, select 'Internal Audio' on the device list and click 'Test Speakers' to check left and right channel
VERIFICATION:
1. Do you hear a sound in the speakers? The internal speakers should *not* be muted automatically
2. Do you hear the sound coming out on the corresponding channel?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
ZWECK:
Überprüfen, dass die externen Line-Out-Anschlüsse korrekt funktionieren
DURCHFÜHRUNG:
1. Stecken Sie das Kabel in den Line-Out-Anschluss des Lautsprechers (mit eingebautem Verstärker).
2. Öffnen Sie die Audio-Einstellungen. Im Reiter »Audio-Ausgabe«, wählen Sie »Line-out«. Klicken Sie dann auf die Schaltfläche »Test«.
3. Wählen Sie »Internes Audio« aus der Geräteliste der Audio-Einstellungen und klicken Sie auf »Testgeräusch«, um den linken und rechten Kanal zu überprüfen.
ÜBERPRÜFUNG:
1. Hören Sie einen Ton aus den Lautsprechern? Die internen Lautsprecher sollten *nicht* automatisch abgeschaltet sein.
2. Hören Sie Geräusche auf dem entsprechenden Kanal?
|
|
Translated and reviewed by
Carsten Gerlach
|
|
|
|
Located in
../jobs/audio.txt.in:208
|
|
26.
|
|
|
PURPOSE:
Check that external line in connection works correctly
STEPS:
1. Use a cable to connect the line in port to an external line out source.
2. Open system sound preferences, 'Input' tab, select 'Line-in' on the connector list. Click the Test button
3. After a few seconds, your recording will be played back to you.
VERIFICATION:
Did you hear your recording?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
ZWECK:
Der Test überprüft, ob die externe Line-In-Verbindung richtig funktioniert.
DURCHFÜHRUNG:
1. Verbinden Sie den Line-In-Anschluss mit einer externen Line-Out-Quelle.
2. Öffnen Sie die Audio-Einstellungen, wechseln Sie zum Reiter »Eingang« und wählen Sie »Line-In« aus der Liste. Klicken Sie dann auf den Knopf »Testen«.
3. Nach ein paar Sekunden wird Ihre Aufnahme wiedergegeben.
ÜBERPRÜFUNG:
Konnten Sie Ihre Aufnahme hören?
|
|
Translated and reviewed by
Carsten Gerlach
|
|
|
|
Located in
../jobs/audio.txt.in:228
|
|
27.
|
|
|
Benchmark for each disk
|
|
|
description
|
|
|
|
Leistungstest für jede Festplatte
|
|
Translated and reviewed by
Hendrik Schrieber
|
|
|
|
Located in
../jobs/benchmarks.txt.in:18
|
|
28.
|
|
|
Run gtkperf to make sure that GTK based test cases work
|
|
|
description
|
|
|
|
Führen Sie »gtkperf« aus, um sicherzustellen, dass GTK-basierte Testprogramme funktionieren.
|
|
Translated and reviewed by
Carsten Gerlach
|
|
|
|
Located in
../jobs/benchmarks.txt.in:35
|
|
29.
|
|
|
Run Render-Bench XRender/Imlib2 benchmark
|
|
|
description
|
|
|
|
»Render-Bench XRender/Imlib2«-Leistungsprüfung ausführen
|
|
Translated and reviewed by
Hendrik Schrieber
|
|
|
|
Located in
../jobs/benchmarks.txt.in:43
|
|
30.
|
|
|
Run Qgears2 XRender Extension gearsfancy benchmark
|
|
|
description
|
|
|
|
»Qgears2 XRender Extension gearsfancy«-Leistungsprüfung ausführen
|
|
Translated and reviewed by
Hendrik Schrieber
|
|
|
|
Located in
../jobs/benchmarks.txt.in:50
|
|
31.
|
|
|
Run Qgears2 XRender Extension image scaling benchmark
|
|
|
description
|
|
|
|
»Qgears2 XRender Extension image scaling«-Leistungsprüfung ausführen
|
|
Translated and reviewed by
Hendrik Schrieber
|
|
|
|
Located in
../jobs/benchmarks.txt.in:57
|