Translations by Tennom

Tennom has submitted the following strings to this translation. Contributions are visually coded: currently used translations, unreviewed suggestions, rejected suggestions.

51100 of 392 results
11.
There was a error adding the CD, the upgrade will abort. Please report this as a bug if this is a valid Ubuntu CD. The error message was: '%s'
2011-07-06
་་CD་་འོད་སྡེར་ནང་ཚན་ཁ་སྣོན་དུས་སྐྱོན་བྱུང་སོང་། རིམ་སྤར་མཚམས་བཅད་ངེས། འདི་གལ་སྲིད་ནུས་ལྡན་གྱི་མ་ལག་Ubuntu ་་CD་་སྒྲིག་སྡེར་ཡིན་ན་སྐྱོན་འདིའི་སྐོར་ཡ་ལན་སྤྲོད་རོགས ནོར་འཁྲུལ་ཡི་གེ་ནི། '%s'
12.
Remove package in bad state
Remove packages in bad state
2011-07-06
སྐྱོན་ཅན་གྱི་ཐུམ་བུ་བསུབ་པ
13.
The package '%s' is in an inconsistent state and needs to be reinstalled, but no archive can be found for it. Do you want to remove this package now to continue?
The packages '%s' are in an inconsistent state and need to be reinstalled, but no archives can be found for them. Do you want to remove these packages now to continue?
2011-07-06
'%s'ཐུམ་བུ་མཉམ་དུ་སྒྲིལ་མི་འདུག་པས་ཡང་བསྐྱར་སྒྲིག་འཇུག་དགོས ་ཡིནའང་འོས་མཚམས་ཀྱི་ཡིག་ཚགས་རྙེད་མ་བྱུང་བས་ཁྱོད་ཀྱིས་ཐུམ་བུ་བསུབ་པ་མུ་མཐུད་དགོས་སམ།
14.
The server may be overloaded
2011-07-06
ཕལ་ཆེར་དྲ་ཞབས་ཞུ་བ་འདིར་ཁུར་པོ་ལྗིད་དྲག་འདུག
15.
Broken packages
2011-07-06
སྐྱོན་ཤོར་བའི་ཐུམ་བུ
16.
Your system contains broken packages that couldn't be fixed with this software. Please fix them first using synaptic or apt-get before proceeding.
2011-07-06
ཁྱོད་ཀྱི་མ་ལག་ནང་མཉེན་ཆས་འདིས་བཟོ་བཅོས་མི་ཐུབ་པའི་ཐུམ་བུ་སྐྱོན་ཅན་འདུག མདུན་སྐྱོད་མ་བྱས་གོང་synaptic་འམ་ཡང་ན་apt-get་བེད་སྤྱོད་གཏོང་ནས་བཟོ་བཅོས་བྱེད་རོགས
17.
An unresolvable problem occurred while calculating the upgrade: %s This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu
2011-07-06
%s་རིམ་སྤོར་རྩིས་འདངས་རྒྱག་དུསབསྐྱར་གསོ་བྱེད་མི་ཐུབ་པའི་གནོད་སྐྱོན་བྱུང་བ གནོད་སྐྱོན་འབྱུང་རྐྱེན། * མ་ལག་Ubuntu་སྔོན་མའི་པར་གཞི་ཞིག་ལ་རིམ་སྤོར་བྱེད་པ * མ་ལག་Ubuntu་སྔོན་མའི་པར་གཞི་ཞིག་དང་ཐོག་བཀོལ་སྤྱོད་བཞིན་པ * མ་ལག་Ubuntu་ཀྱིས་མཁོ་སྤྲོད་མ་བྱས་པའི་གཞུང་བཟོས་མཉེན་ཆས་ཐུམ་བུ་མིན་པ
18.
This is most likely a transient problem, please try again later.
2011-07-06
This is most likely a transient problem. Please try again later.
20.
Could not calculate the upgrade
2011-07-06
རིམ་སྤོར་རྩིས་འདངས་རྒྱག་མི་ཐུབ་པ
21.
Error authenticating some packages
2011-07-06
ཐུམ་བུ་འགའ་ངོས་འཛིན་བྱེད་པ་ནོར་འཁྲུལ་
22.
It was not possible to authenticate some packages. This may be a transient network problem. You may want to try again later. See below for a list of unauthenticated packages.
2011-07-06
It was not possible to authenticate some packages. This may be a transient network problem. You may want to try again later. See below for a list of unauthenticated packages.
23.
The package '%s' is marked for removal but it is in the removal blacklist.
2011-07-06
རྟགས་'%s'འདི་འཁོད་ཡོད་པ་ཚང་མ་བསུབ་དགོས་ཀྱང་འདི་བསུབ་རྒྱུའི་དེབ་ཐོ་ནང་དུ་མི་འདུག
24.
The essential package '%s' is marked for removal.
2011-07-06
གལ་ཆེན་ཐུམ་བུ'%s' འདིར་བསུབ་དགོས་པའི་རྟགས་འཁོད་འདུག
25.
Trying to install blacklisted version '%s'
2011-07-06
རྟགས་ངན་ཅན་པར་གཞི་'%s་སྒྲིག་འཇུག་ཚོད་ལྟ་བཞིན་པ'
26.
Can't install '%s'
2011-07-06
'%s'སྒྲིག་འཇུག་མི་ཐུབ་པ
28.
Can't guess meta-package
2011-07-06
meta-package་ཚོད་དཔགས་མི་ཐུབ་པ
29.
Your system does not contain a ubuntu-desktop, kubuntu-desktop, xubuntu-desktop or edubuntu-desktop package and it was not possible to detect which version of Ubuntu you are running. Please install one of the packages above first using synaptic or apt-get before proceeding.
2011-07-06
ཁྱོད་ཀྱི་མ་ལག་ནང་Your system does not contain a ubuntu-སྒྲོག་སྟེགས, kubuntu-སྒྲོག་སྟེགས, xubuntu-སྒྲོག་སྟེགས་ཡང་ན་edubuntu-སྒྲོག་སྟེགས་ཐུམ་བུ་ཞིག་འདུས་མེད་པས་སྤྱོད་བཞིན་པའི་པར་གཞི་རྩིས་བཤེར་བྱེད་པ་འགྲུབ་མི་སྲིད མདུན་སྐྱོད་མ་བྱས་གོང་synaptic་དང་ཡང་ན་ apt-get་བེད་སྤྱོད་ནས་གོང་གི་ཐུམ་བུ་ཞིག་སྒྲིག་འཇུག་བྱེད་རོགས
30.
Reading cache
2011-07-06
དྲ་ཤུལ་ཀློག་བཞིན་པ
31.
Unable to get exclusive lock
2011-07-06
གཅིག་འགྱུར་གྱི་ཟྭ་མ་ཐོབ་པ
32.
This usually means that another package management application (like apt-get or aptitude) already running. Please close that application first.
2011-07-06
This usually means that another package management application (like apt-get or aptitude) already running. Please close that application first.
33.
Upgrading over remote connection not supported
2011-07-06
རྒྱང་འབྲེལ་སྦྲེལ་མཐུད་རིམ་སྤོར་བྱེད་པ་རྒྱབ་སྐྱོར་མེད
34.
You are running the upgrade over a remote ssh connection with a frontend that does not support this. Please try a text mode upgrade with 'do-release-upgrade'. The upgrade will abort now. Please try without ssh.
2011-07-06
ཁྱོད་ཀྱི་རིམ་སྤོར་འདི་མདུན་ངོས་མཐུད་སྣེའི་རམ་འདེགས་མེད་པའི་རྒྱང་འབྲེལ་ssh སྦྲེལ་མཐུད་ཐོག་འཁོར་སྐྱོད་བྱེད་བཞིན་འདུག ཁྱོད་ཀྱིས'do-release-upgrade'སྤྱད་ནས་ཡི་གེ་རྣམ་པ་ཅན་གྱི་རིམ་སྤོར་ལ་ཚོད་ལྟ་བྱེད་རོགས། རིམ་སྤོར་འདི་ད་ལྟ་མཚམས་བཅད་རྒྱུ་ཡིན་པ་དང་sshམ་སྤྱད་པ་ཚོད་ལྟ་བྱེད་རོགས
35.
Continue running under SSH?
2011-07-06
SSH?
36.
This session appears to be running under ssh. It is not recommended to perform a upgrade over ssh currently because in case of failure it is harder to recover. If you continue, an additional ssh daemon will be started at port '%s'. Do you want to continue?
2011-07-06
This session appears to be running under ssh. It is not recommended to perform a upgrade over ssh currently because in case of failure it is harder to recover. If you continue, an additional ssh daemon will be started at port '%s'. Do you want to continue?
37.
Starting additional sshd
2011-07-06
Starting additional sshd
38.
To make recovery in case of failure easier, an additional sshd will be started on port '%s'. If anything goes wrong with the running ssh you can still connect to the additional one.
2011-07-06
To make recovery in case of failure easier, an additional sshd will be started on port '%s'. If anything goes wrong with the running ssh, you can still connect to the additional one.
39.
If you run a firewall, you may need to temporarily open this port. As this is potentially dangerous it's not done automatically. You can open the port with e.g.: '%s'
2011-07-06
ཁྱོད་ཉེན་འགོག་ཆས་སྤྱད་ན་གནས་སྐབས་རིང་མཐུད་སྣེ་འདི་ཁ་འབྱེད་དགོས་ཉེན་ཆེ། འདིར་ཉེན་ཁ་ཅུང་ཡོད་པས་རང་འགུལ་གྱིས་བཟོས་མེད། ཁྱོད་ཀྱིས་འདི་སྤྱད་ནས་མཐུད་སྣེ་ཁ་འབྱེད་ཆོག་པ། དཔེར་ན: '%s'
40.
Can not upgrade
2011-07-06
Cannot upgrade
41.
An upgrade from '%s' to '%s' is not supported with this tool.
2011-07-06
An upgrade from '%s' to '%s' is not supported with this tool.
42.
Sandbox setup failed
2011-07-06
Sandbox setup failed
43.
It was not possible to create the sandbox environment.
2011-07-06
It was not possible to create the sandbox environment.
44.
Sandbox mode
2011-07-06
Sandbox mode
45.
This upgrade is running in sandbox (test) mode. All changes are written to '%s' and will be lost on the next reboot. *No* changes written to a systemdir from now until the next reboot are permanent.
2011-07-06
This upgrade is running in sandbox (test) mode. All changes are written to '%s' and will be lost on the next reboot. *No* changes written to a systemdir from now until the next reboot are permanent.
46.
Your python install is corrupted. Please fix the '/usr/bin/python' symlink.
2011-07-06
Your python install is corrupted. Please fix the '/usr/bin/python' symlink.
47.
Package 'debsig-verify' is installed
2011-07-06
Package 'debsig-verify' is installed
48.
The upgrade can not continue with that package installed. Please remove it with synaptic or 'apt-get remove debsig-verify' first and run the upgrade again.
2011-07-06
The upgrade can not continue with that package installed. Please remove it with synaptic or 'apt-get remove debsig-verify' first and run the upgrade again.
49.
Include latest updates from the Internet?
2011-07-06
Include latest updates from the Internet?
50.
The upgrade system can use the internet to automatically download the latest updates and install them during the upgrade. If you have a network connection this is highly recommended. The upgrade will take longer, but when it is complete, your system will be fully up to date. You can choose not to do this, but you should install the latest updates soon after upgrading. If you answer 'no' here, the network is not used at all.
2011-07-06
The upgrade system can use the Internet to automatically download the latest updates and install them during the upgrade. If you have a network connection, this is highly recommended. The upgrade will take longer, but when it is complete, your system will be fully up-to-date. You can choose not to do this, but you should install the latest updates soon after upgrading. If you answer 'no' here, the network is not used at all.
51.
disabled on upgrade to %s
2011-07-06
disabled on upgrade to %s
52.
No valid mirror found
2011-07-06
No valid mirror found
53.
While scanning your repository information no mirror entry for the upgrade was found. This can happen if you run a internal mirror or if the mirror information is out of date. Do you want to rewrite your 'sources.list' file anyway? If you choose 'Yes' here it will update all '%s' to '%s' entries. If you select 'No' the upgrade will cancel.
2011-07-06
While scanning your repository information no mirror entry for the upgrade was found. This can happen if you run an internal mirror or if the mirror information is out of date. Do you want to rewrite your 'sources.list' file anyway? If you choose 'Yes' here it will update all '%s' to '%s' entries. If you select 'No' the upgrade will cancel.
54.
Generate default sources?
2011-07-06
Generate default sources?
55.
After scanning your 'sources.list' no valid entry for '%s' was found. Should default entries for '%s' be added? If you select 'No', the upgrade will cancel.
2011-07-06
After scanning your 'sources.list' no valid entry for '%s' was found. Should default entries for '%s' be added? If you select 'No', the upgrade will cancel.
56.
Repository information invalid
2011-07-06
གསོག་མཛོད་ཆ་འཕྲིན་ཕན་ནུས་མེད་པ
58.
Third party sources disabled
2011-07-06
གཉེར་མཁན་གསུམ་པའི་འབྱུང་ཁུངས་ནུས་མེད་སྒྱུར
59.
Some third party entries in your sources.list were disabled. You can re-enable them after the upgrade with the 'software-properties' tool or your package manager.
2011-07-06
Some third party entries in your sources.list were disabled. You can re-enable them after the upgrade with the 'software-properties' tool or your package manager.
60.
Package in inconsistent state
Packages in inconsistent state
2011-07-06
འཐུམ་སྒྲིལ་མཉམ་སྒྲིལ་མིན་པ
61.
The package '%s' is in an inconsistent state and needs to be reinstalled, but no archive can be found for it. Please reinstall the package manually or remove it from the system.
The packages '%s' are in an inconsistent state and need to be reinstalled, but no archive can be found for them. Please reinstall the packages manually or remove them from the system.
2011-07-06
'%s' འཐུམ་སྒྲིལ་ནི་མཉམ་དུ་སྦྲེལ་མི་འདུག་པས་ཡང་བསྐྱར་སྒྲིག་འཇུག་གནང་རོགས། ཡིནའང་སྒྲིག་འཇུག་ཡིག་ཚགས་ཀྱང་རྙེད་མི་འདུག་པས་འཐུམ་སྒྲིལ་ལག་པས་སྒྲིག་འཇུག་བཤིགས་པའམ་མ་ལག་ཐོག་ནས་འདོར་དགོས
62.
Error during update
2011-07-06
གསར་སྒྱུར་གྱི་ནོར་འཁྲུལ
63.
A problem occurred during the update. This is usually some sort of network problem, please check your network connection and retry.
2011-07-06
གསར་སྒྱུར་སྐབས་ནོར་འཁྲུལ་བྱུང་བ། ནམ་རྒྱུན་འདི་ནི་དྲ་བའི་གནོད་སྐྱོན་ཡིན་པས་ problem, please check your network connection and retry.