Ubuntu
gutenprint package

Browsing English (United Kingdom) translation

  1. Oneiric (11.10)
  2. Template “gutenprint”
  3. English (United Kingdom) (en_GB)
Don't show this notice anymore
Before translating, be sure to go through Ubuntu Translators instructions and English (United Kingdom) guidelines.
594 → 603 of 2615 results First • • • Last
594.
Usage: escputil [OPTIONS] [COMMAND]
Usage: escputil [-c | -n | -a | -i | -e | -s | -d | -l | -M]
[-P printer | -r device] [-u] [-q] [-m model] [ -S ]
[-C choices] [-p patterns]
Perform maintenance on EPSON Stylus (R) printers.
Examples: escputil -i -r /dev/usb/lp0
escputil -c -u -P MyQueue

Commands:
-c Clean the print head.
-n Print a nozzle test pattern.
Dirty or clogged nozzles will show as gaps in the
pattern. If you see any gaps, you should clean
the print head.
-a Align the print head. CAUTION: Misuse of this
utility may result in poor print quality and/or
damage to the printer.
-s Retrieve printer status.
-i Obtain the ink level from the printer. This requires
read/write access to the raw printer device.
-e Obtain the extended ink information from the printer.
Only for R800 printer and friends. This requires
read/write access to the raw printer device.
-d Query the printer for make and model information. This
requires read/write access to the raw printer device.
-l Display the license/warranty terms of this program.
-M List the available printer models.
-h Print this help message.
Options:
-P Specify the name of the printer queue to operate on.
Default is the default system printer.
-r Specify the name of the device to write to directly
rather than going through a printer queue.
-u The printer is a new printer (Stylus Color 740 or newer).
Only needed when not using a raw device.
-q Suppress the banner.
-S Print the short name of the printer with -d.
-m Specify the precise printer model for head alignment.
-C Specify the number of pattern choices for alignment
-p Specify the number of sets of patterns for alignment
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
Usage: escputil [OPTIONS] [COMMAND]
Usage: escputil [-c | -n | -a | -i | -e | -s | -d | -l | -M]
[-P printer | -r device] [-u] [-q] [-m model] [ -S ]
[-C choices] [-p patterns]
Perform maintenance on EPSON Stylus (R) printers.
Examples: escputil -i -r /dev/usb/lp0
escputil -c -u -P MyQueue

Commands:
-c Clean the print head.
-n Print a nozzle test pattern.
Dirty or clogged nozzles will show as gaps in the
pattern. If you see any gaps, you should clean
the print head.
-a Align the print head. CAUTION: Misuse of this
utility may result in poor print quality and/or
damage to the printer.
-s Retrieve printer status.
-i Obtain the ink level from the printer. This requires
read/write access to the raw printer device.
-e Obtain the extended ink information from the printer.
Only for R800 printer and friends. This requires
read/write access to the raw printer device.
-d Query the printer for make and model information. This
requires read/write access to the raw printer device.
-l Display the licence/warranty terms of this program.
-M List the available printer models.
-h Print this help message.
Options:
-P Specify the name of the printer queue to operate on.
Default is the default system printer.
-r Specify the name of the device to write to directly
rather than going through a printer queue.
-u The printer is a new printer (Stylus Colour 740 or newer).
Only needed when not using a raw device.
-q Suppress the banner.
-S Print the short name of the printer with -d.
-m Specify the precise printer model for head alignment.
-C Specify the number of pattern choices for alignment
-p Specify the number of sets of patterns for alignment
Translated and reviewed by Robert Readman
In upstream:
Usage: escputil [OPTIONS] [COMMAND]
Usage: escputil [-c | -n | -a | -i | -e | -s | -d | -l | -M]
[-P printer | -r device] [-u] [-q] [-m model] [ -S ]
[-C choices] [-p patterns]
Perform maintenance on EPSON Stylus ® printers.
Examples: escputil -i -r /dev/usb/lp0
escputil -c -u -P MyQueue

Commands:
-c Clean the print head.
-n Print a nozzle test pattern.
Dirty or clogged nozzles will show as gaps in the
pattern. If you see any gaps, you should clean
the print head.
-a Align the print head. CAUTION: Misuse of this
utility may result in poor print quality and/or
damage to the printer.
-s Retrieve printer status.
-i Obtain the ink level from the printer. This requires
read/write access to the raw printer device.
-e Obtain the extended ink information from the printer.
Only for R800 printer and friends. This requires
read/write access to the raw printer device.
-d Query the printer for make and model information. This
requires read/write access to the raw printer device.
-l Display the license/warranty terms of this program.
-M List the available printer models.
-h Print this help message.
Options:
-P Specify the name of the printer queue to operate on.
Default is the default system printer.
-r Specify the name of the device to write to directly
rather than going through a printer queue.
-u The printer is a new printer (Stylus Color 740 or newer).
Only needed when not using a raw device.
-q Suppress the banner.
-S Print the short name of the printer with -d.
-m Specify the precise printer model for head alignment.
-C Specify the number of pattern choices for alignment
-p Specify the number of sets of patterns for alignment
Suggested by Roger Leigh
Located in src/escputil/escputil.c:162
595.
You may only specify one printer or raw device.
You may only specify one printer or raw device.
Translated and reviewed by Roger Leigh
Located in src/escputil/escputil.c:350 src/escputil/escputil.c:358
596.
You may only specify one printer model.
You may only specify one printer model.
Translated and reviewed by Roger Leigh
Located in src/escputil/escputil.c:366
597.
Alignment choices must be at least 1.
Alignment choices must be at least 1.
Translated and reviewed by Isopogon
Located in src/escputil/escputil.c:390
598.
Alignment passes must be at least 1.
Alignment passes must be at least 1.
Translated and reviewed by Isopogon
Located in src/escputil/escputil.c:398
599.
Unknown option %c
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
Unknown option %c
Translated and reviewed by Roger Leigh
Located in src/escputil/escputil.c:404
600.
Usage: %s [OPTIONS] command
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
Usage: %s [OPTIONS] command
Translated and reviewed by Isopogon
Located in src/escputil/escputil.c:412
601.
Type `%s --help' for more information.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
Type `%s --help' for more information.
Translated and reviewed by Isopogon
Located in src/escputil/escputil.c:414
602.
Type `%s -h' for more information.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
Type `%s -h' for more information.
Translated and reviewed by Isopogon
Located in src/escputil/escputil.c:416
603.
Cannot open device %s: %s
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
Cannot open device %s: %s
Translated and reviewed by Roger Leigh
Located in src/escputil/escputil.c:485
594 → 603 of 2615 results First • • • Last

This translation is managed by Ubuntu English (United Kingdom) Translators, assigned by Ubuntu Translators.

You are not logged in. Please log in to work on translations.

Contributors to this translation: Andi Chandler, David Murphy, Isopogon, James Thorrold, Jen Ockwell, Robert Readman, Roger Leigh, Sohrab, Tomasz Chabowski.