|
|
247.
|
|
|
A driver for your hardware is not available. You may need to load drivers from removable media, such as a USB stick, or driver floppy.
|
|
|
Type: boolean
Description
:sl2:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../hw-detect.templates:10001
|
|
|
250.
|
|
|
Some of your hardware needs non-free firmware files to operate. The firmware can be loaded from removable media, such as a USB stick or floppy.
|
|
|
Type: boolean
Description
:sl2:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../hw-detect.templates:11001
|
|
|
254.
|
|
|
Networking can either be configured by DHCP or by manually entering all the information. If you choose to use DHCP and the installer is unable to get a working configuration from a DHCP server on your network, you will be given the opportunity to configure your network manually after the attempt to configure it by DHCP.
|
|
|
Type: boolean
Description
:sl1:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../netcfg-common.templates:2001
|
|
|
256.
|
|
|
The domain name is the part of your Internet address to the right of your host name. It is often something that ends in .com, .net, .edu, or .org. If you are setting up a home network, you can make something up, but make sure you use the same domain name on all your computers.
|
|
|
Type: string
Description
:sl1:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../netcfg-common.templates:3001
|
|
|
258.
|
|
|
The name servers are used to look up host names on the network. Please enter the IP addresses (not host names) of up to 3 name servers, separated by spaces. Do not use commas. The first name server in the list will be the first to be queried. If you don't want to use any name server, just leave this field blank.
|
|
|
Type: string
Description
:sl1:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../netcfg-common.templates:4001
|
|
|
262.
|
|
|
${iface} is a wireless network interface. Please enter the name (the ESSID) of the wireless network you would like ${iface} to use. If you would like to use any available network, leave this field blank.
|
|
|
Type: string
Description
:sl2:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../netcfg-common.templates:6001
|
|
|
264.
|
|
|
${iface} is a wireless network interface. Please enter the name (the ESSID) of the wireless network you would like ${iface} to use. To skip wireless configuration and continue, leave this field blank.
|
|
|
Type: string
Description
:sl2:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../netcfg-common.templates:7001
|
|
|
266.
|
|
|
If applicable, please enter the WEP security key for the wireless device ${iface}. There are two ways to do this:
|
|
|
Type: string
Description
:sl2:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../netcfg-common.templates:9001
|
|
|
268.
|
|
|
If your WEP key is in the format of a passphrase, prefix it with 's:' (without quotes).
|
|
|
Type: string
Description
:sl2:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../netcfg-common.templates:9001
|
|
|
269.
|
|
|
Of course, if there is no WEP key for your wireless network, leave this field blank.
|
|
|
Type: string
Description
:sl2:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../netcfg-common.templates:9001
|
