|
72.
|
|
|
Booting with MILO
|
|
|
Tag: title
|
|
|
|
(no translation yet)
|
|
|
|
Located in
boot-installer.xml:436
|
|
73.
|
|
|
MILO contained on the bootstrap media is configured to proceed straight to Linux automatically. Should you wish to intervene, all you need is to press space during MILO countdown.
|
|
|
Tag: para
|
|
|
|
(no translation yet)
|
|
|
|
Located in
boot-installer.xml:437
|
|
74.
|
|
|
If you want to specify all the bits explicitly (for example, to supply additional parameters), you can use a command like this: <informalexample><screen>
MILO> boot fd0:linux.bin.gz root=/dev/fd0 load_ramdisk=1 <!-- arguments -->
</screen></informalexample> If you are booting from something other than a floppy, substitute <filename>fd0</filename> in the above example with the appropriate device name in Linux notation. The <command>help</command> command would give you a brief MILO command reference.
|
|
|
Tag: para
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
|
(no translation yet)
|
|
|
|
Located in
boot-installer.xml:443
|
|
75.
|
|
|
Booting from TFTP
|
|
|
Tag: title
|
|
|
|
(no translation yet)
|
|
|
|
Located in
boot-installer.xml:462
|
|
76.
|
|
|
Booting from the network requires that you have a network connection and a TFTP network boot server (DHCP, RARP, or BOOTP).
|
|
|
Tag: para
|
|
|
|
(no translation yet)
|
|
|
|
Located in
boot-installer.xml:468 boot-installer.xml:1056 boot-installer.xml:1595 boot-installer.xml:2080 boot-installer.xml:2597 boot-installer.xml:2706
|
|
77.
|
|
|
Older systems such as the 715 might require the use of an RBOOT server instead of a BOOTP server.
|
|
|
Tag: para
|
|
|
|
(no translation yet)
|
|
|
|
Located in
boot-installer.xml:473 boot-installer.xml:1061 boot-installer.xml:1600 boot-installer.xml:2085 boot-installer.xml:2602 boot-installer.xml:2711
|
|
78.
|
|
|
The installation method to support network booting is described in <xref linkend="install-tftp"/>.
|
|
|
Tag: para
|
|
|
|
(no translation yet)
|
|
|
|
Located in
boot-installer.xml:478 boot-installer.xml:1066 boot-installer.xml:1605 boot-installer.xml:2090 boot-installer.xml:2607 boot-installer.xml:2716
|
|
79.
|
|
|
Booting from TFTP on Netwinder
|
|
|
Tag: title
|
|
|
|
(no translation yet)
|
|
|
|
Located in
boot-installer.xml:486
|
|
80.
|
|
|
Netwinders have two network interfaces: A 10Mbps NE2000-compatible card (which is generally referred to as <literal>eth0</literal>) and a 100Mbps Tulip card. There may be problems loading the image via TFTP using the 100Mbps card so it is recommended that you use the 10Mbps interface (the one labeled with <literal>10 Base-T</literal>).
|
|
|
Tag: para
|
|
|
|
(no translation yet)
|
|
|
|
Located in
boot-installer.xml:487
|
|
81.
|
|
|
You need NeTTrom 2.2.1 or later to boot the installation system, and version 2.3.3 is recommended. Unfortunately, firmware files are currently not available for download because of license issues. If this situation changes, you may find new images at <ulink url="http//www.netwinder.org/"></ulink>.
|
|
|
Tag: para
|
|
|
|
(no translation yet)
|
|
|
|
Located in
boot-installer.xml:496
|