Browsing Tajik translation

Don't show this notice anymore
Before translating, be sure to go through Ubuntu Translators instructions and Tajik guidelines.
251260 of 1056 results
251.
This wizard will help you configure KPilot.
(no translation yet)
252.
As a first step, we need to determine the user name and how the handheld is connected to the computer.
(no translation yet)
253.
Handheld && User Name
(no translation yet)
254.
<p>You can either let KPilot detect these values automatically (for this you need your handheld ready and connected to the PC) or enter them manually.</p>
<p>Please enter the username exactly as set on the handheld. </p>
<p>If setting the device type manually (i.e., if automatic detection did not work for you), please look below for tips on choosing the right device name. {0...n} means a number from 0 up to a very large number, though usually just 255.
<p>
Serial Port: an old method of connection, used primarily by the original line of Palm Pilots, and various Palm-based cellphones. Device name will look like /dev/ttyS{0...n} (Linux) or /dev/cuaa{0...n} (FreeBSD).</p>
<p>
USB Port: A newer style of connection, used by most newer Palms, Handsprings, and Sony Clies. Device name will look like /dev/ttyUSB{0...n} or /dev/usb/tts/{0...n} (Linux) or /dev/ucom{0...n} (FreeBSD). On Linux, definitely check both 0 and 1: newer devices tend to use 1; older devices tend to use 0.</p>
<p>
Infrared: (pronounced infra-red) is a relatively slow connection type used solely as a last resort. Device name will be /dev/ircomm0 or /dev/ttyS{0...n} (Linux), or /dev/sio{0...n} (FreeBSD).</p>
<p>
Bluetooth: A new connection method, this is used almost exclusively on new, high-end devices, like the Tungsten T3 or the Zire 72. Device name will be /dev/usb/ttub/{0...n} or /dev/ttyUB{0...n} (Linux), or /dev/ttyp{0...n} (FreeBSD).</p>
<p>
Network: This has not been tested by any of the KPilot developers themselves (hardware donations always accepted!), but it has been reported that setting the device to "net:any" will work for network-enabled devices. However, this has also been known to lock KPilot up when doing anything other than just syncing. Use it with caution.
</p>
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
255.
&Device:
&Ташкил кардан:
Translated by Marina Kolucheva
256.
<qt>Enter the device the Pilot is attached to (for instance a serial or USB port) here. You can also use <i>/dev/pilot</i>, and make that a symlink to the correct device. Use the button below to automatically detect the device. You need write permission to successfully synchronize with the handheld.</qt>
<qt> Номи файли дуруст кардае,ки дар пилот пайваст шуда гузоред (пай дар ҳами порт ёпорти USB).Шумо метавонед <i>/dev/pilot</i>, нишон диҳед ва размӣ истинод кардаро ба файли истифода баранда бино кардан.Тугмачаи поёнро барои бо таври автоматики муаян кардани васл истифода баред.Шумо муҳимаш,ки барои синхронизация ҳуқуқ барои сабти муқаррар дошта бошед.
Translated by Marina Kolucheva
257.
&Automatically Detect Handheld && User Name
(no translation yet)
258.
<qt>Click this button to open the detection dialog. The wizard will try to automatically find and display the correct device and username for your handheld. If the wizard cannot retrieve this information, check if you have write permission for the device.</qt>
(no translation yet)
259.
/dev/pilot
/dev/pilot
Translated by Marina Kolucheva
260.
<qt>Enter your username here, as it appears in the Pilot's &quot;Owner&quot; setting, or use the button below to automatically detect it.</qt>
(no translation yet)
251260 of 1056 results

This translation is managed by Tajik Ubuntu Localization, assigned by Ubuntu Translators.

You are not logged in. Please log in to work on translations.

Contributors to this translation: Marina Kolucheva.