|
301.
|
|
|
The following Linux kernel modules were detected as matching your hardware. If you know some are unnecessary, or cause problems, you can choose not to load them. If you're unsure, you should leave them all selected.
|
|
|
Type: multiselect
Description
:sl2:
|
|
|
|
Următoarele module de nucleu Linux au fost detectate ca fiind potrivite pentru componentele dumneavoastră. Dacă știți că unele nu sunt necesare, sau cauzează probleme, puteți să optați să nu le încărcați. Dacă știți sigur ar fi bine să le lăsați pe toate selectate.
|
|
Translated by
Ioan Eugen Stan
|
|
|
|
Located in
../hw-detect.templates:5001
|
|
302.
|
|
|
Start PC card services?
|
|
|
Type: boolean
Description
FIXME: not in use and kept just while we're still in doubt it will
be needed
:sl2:
|
|
|
|
Se pornesc serviciile asociate plăcilor PC?
|
|
Translated and reviewed by
Eddy Petrisor
|
|
|
|
Located in
../hw-detect.templates:6001
|
|
303.
|
|
|
Please choose whether PC card services should be started in order to allow the use of PCMCIA cards.
|
|
|
Type: boolean
Description
FIXME: not in use and kept just while we're still in doubt it will
be needed
:sl2:
|
|
|
|
Precizați dacă serviciile asociate plăcilor PC ar trebui pornite pentru a permite utilizarea plăcilor PCMCIA.
|
|
Translated by
Eddy Petrisor
|
|
Reviewed by
Eddy Petrisor
|
|
|
|
Located in
../hw-detect.templates:6001
|
|
304.
|
|
|
PCMCIA resource range options:
|
|
|
Type: string
Description
:sl2:
|
|
|
|
Opțiuni legate de domeniul de resurse PCMCIA:
|
|
Translated by
Eddy Petrisor
|
|
Reviewed by
Eddy Petrisor
|
|
|
|
Located in
../hw-detect.templates:7001
|
|
305.
|
|
|
Some PCMCIA hardware needs special resource configuration options in order to work, and can cause the computer to freeze otherwise. For example, some Dell laptops need "exclude port 0x800-0x8ff" to be specified here. These options will be added to /etc/pcmcia/config.opts. See the installation manual or the PCMCIA HOWTO for more information.
|
|
|
Type: string
Description
:sl2:
|
|
|
|
Unele plăci PCMCIA au nevoie de opțiuni speciale de configurare a resurselor pentru a funcționa și pot cauza blocări ale sistemului, dacă sunt neconfigurate. De exemplu, unele laptopuri Dell au nevoie ca următoarele opțiuni „exclude port 0x800-0x8ff” să fie menționate aici. Aceste opțiuni vor fi adăugate la /etc/pcmcia/config.opts. Consultați manualul de instalare sau PCMCIA HOWTO pentru mai multe informații.
|
|
Translated by
Ioan Eugen Stan
|
|
|
|
Located in
../hw-detect.templates:7001
|
|
306.
|
|
|
For most hardware, you do not need to specify anything here.
|
|
|
Type: string
Description
:sl2:
|
|
|
|
Pentru majoritatea plăcilor nu trebuie menționat nimic.
|
|
Translated by
Eddy Petrisor
|
|
Reviewed by
Eddy Petrisor
|
|
|
|
Located in
../hw-detect.templates:7001
|
|
307.
|
|
|
Additional parameters for module ${MODULE}:
|
|
|
Type: string
Description
:sl3:
|
|
|
|
Parametri suplimentari pentru modulul ${MODULE}:
|
|
Translated and reviewed by
Eddy Petrisor
|
|
|
|
Located in
../hw-detect.templates:8001
|
|
308.
|
|
|
The module ${MODULE} failed to load. You may need to pass parameters to the module to make it work; this is common with older hardware. These parameters are often I/O port and IRQ numbers that vary from machine to machine and cannot be determined from the hardware. An example string looks something like "irq=7 io=0x220"
|
|
|
Type: string
Description
:sl3:
|
|
|
|
Modulul ${MODULE} a eșuat la încărcare. Probabil că va fi nevoie să dați parametri modulului pentru a-l face să funcționeze; acest lucru este normal la componente vechi. Acești parametri sunt, de regulă porturi I/O și numere IRQ care variază de la o mașină la alta și nu pot fi detectate. Un exemplu de un asemenea șir: „irq=7 io=0x220”
|
|
Translated and reviewed by
Vlad Paul Paval
|
In upstream: |
|
Modulul ${MODULE} a eșuat la încărcare. Probabil că va fi nevoie să dați parametri modulului pentru a-l face să funcționeze; acest lucru este comun la componente vechi. Acești parametri sunt, de regulă porturi I/O și numere IRQ care variază de la o mașină la alta,și nu pot fi detectate. Un exemplu de un asemenea șir: „irq=7 io=0x220”
|
|
|
Suggested by
Eddy Petrisor
|
|
|
|
Located in
../hw-detect.templates:8001
|
|
309.
|
|
|
If you don't know what to enter, consult your documentation, or leave it blank to not load the module.
|
|
|
Type: string
Description
:sl3:
|
|
|
|
Dacă nu știți ce să introduceți, consultați documentația sau lăsați câmpul gol pentru a nu încărca modulul.
|
|
Translated by
Eddy Petrisor
|
|
Reviewed by
Eddy Petrisor
|
|
|
|
Located in
../hw-detect.templates:8001
|
|
310.
|
|
|
Error while running '${CMD_LINE_PARAM}'
|
|
|
Type: error
Description
:sl2:
|
|
|
|
Eroare în timpul rulării '${CMD_LINE_PARAM}'
|
|
Translated and reviewed by
Eddy Petrisor
|
|
|
|
Located in
../hw-detect.templates:9001
|