Browsing Occitan (post 1500) translation

156.

Usage: nmcli connection show { ARGUMENTS | help }

ARGUMENTS := [--active] [--order <order spec>]

List in-memory and on-disk connection profiles, some of which may also be
active if a device is using that connection profile. Without a parameter, all
profiles are listed. When --active option is specified, only the active
profiles are shown. --order allows custom connection ordering (see manual page).

ARGUMENTS := [--active] [id | uuid | path | apath] <ID> ...

Show details for specified connections. By default, both static configuration
and active connection data are displayed. It is possible to filter the output
using global '--fields' option. Refer to the manual page for more information.
When --active option is specified, only the active profiles are taken into
account. Use global --show-secrets option to reveal associated secrets as well.

158.

Usage: nmcli connection down { ARGUMENTS | help }

ARGUMENTS := [id | uuid | path | apath] <ID> ...

Deactivate a connection from a device (without preventing the device from
further auto-activation). The profile to deactivate is identified by its name,
UUID or D-Bus path.

159.

Usage: nmcli connection add { ARGUMENTS | help }

ARGUMENTS := COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS SLAVE_OPTIONS IP_OPTIONS [-- ([+|-]<setting>.<property> <value>)+]

COMMON_OPTIONS:
type <type>
ifname <interface name> | "*"
[con-name <connection name>]
[autoconnect yes|no]
[save yes|no]
[master <master (ifname, or connection UUID or name)>]
[slave-type <master connection type>]

TYPE_SPECIFIC_OPTIONS:
ethernet: [mac <MAC address>]
[cloned-mac <cloned MAC address>]
[mtu <MTU>]

wifi: ssid <SSID>
[mac <MAC address>]
[cloned-mac <cloned MAC address>]
[mtu <MTU>]
[mode infrastructure|ap|adhoc]

wimax: [mac <MAC address>]
[nsp <NSP>]

pppoe: username <PPPoE username>
[password <PPPoE password>]
[service <PPPoE service name>]
[mtu <MTU>]
[mac <MAC address>]

gsm: apn <APN>
[user <username>]
[password <password>]

cdma: [user <username>]
[password <password>]

infiniband: [mac <MAC address>]
[mtu <MTU>]
[transport-mode datagram | connected]
[parent <ifname>]
[p-key <IPoIB P_Key>]

bluetooth: [addr <bluetooth address>]
[bt-type panu|dun-gsm|dun-cdma]

vlan: dev <parent device (connection UUID, ifname, or MAC)>
id <VLAN ID>
[flags <VLAN flags>]
[ingress <ingress priority mapping>]
[egress <egress priority mapping>]
[mtu <MTU>]

bond: [mode balance-rr (0) | active-backup (1) | balance-xor (2) | broadcast (3) |
802.3ad (4) | balance-tlb (5) | balance-alb (6)]
[primary <ifname>]
[miimon <num>]
[downdelay <num>]
[updelay <num>]
[arp-interval <num>]
[arp-ip-target <num>]
[lacp-rate slow (0) | fast (1)]

bond-slave: master <master (ifname, or connection UUID or name)>

team: [config <file>|<raw JSON data>]

team-slave: master <master (ifname, or connection UUID or name)>
[config <file>|<raw JSON data>]

bridge: [stp yes|no]
[priority <num>]
[forward-delay <2-30>]
[hello-time <1-10>]
[max-age <6-40>]
[ageing-time <0-1000000>]
[multicast-snooping yes|no]
[mac <MAC address>]

bridge-slave: master <master (ifname, or connection UUID or name)>
[priority <0-63>]
[path-cost <1-65535>]
[hairpin yes|no]

vpn: vpn-type vpnc|openvpn|pptp|openconnect|openswan|libreswan|ssh|l2tp|iodine|...
[user <username>]

olpc-mesh: ssid <SSID>
[channel <1-13>]
[dhcp-anycast <MAC address>]

adsl: username <username>
protocol pppoa|pppoe|ipoatm
[password <password>]
[encapsulation vcmux|llc]

tun: mode tun|tap
[owner <UID>]
[group <GID>]
[pi yes|no]
[vnet-hdr yes|no]
[multi-queue yes|no]

ip-tunnel: mode ipip|gre|sit|isatap|vti|ip6ip6|ipip6|ip6gre|vti6
remote <remote endpoint IP>
[local <local endpoint IP>]
[dev <parent device (ifname or connection UUID)>]

macvlan: dev <parent device (connection UUID, ifname, or MAC)>
mode vepa|bridge|private|passthru|source
[tap yes|no]

vxlan: id <VXLAN ID>
remote <IP of multicast group or remote address>
[local <source IP>]
[dev <parent device (ifname or connection UUID)>]
[source-port-min <0-65535>]
[source-port-max <0-65535>]
[destination-port <0-65535>]

SLAVE_OPTIONS:
bridge: [priority <0-63>]
[path-cost <1-65535>]
[hairpin yes|no]

team: [config <file>|<raw JSON data>]

IP_OPTIONS:
[ip4 <IPv4 address>] [gw4 <IPv4 gateway>]
[ip6 <IPv6 address>] [gw6 <IPv6 gateway>]

161.

Usage: nmcli connection clone { ARGUMENTS | help }

ARGUMENTS := [--temporary] [id | uuid | path] <ID> <new name>

Clone an existing connection profile. The newly created connection will be
the exact copy of the <ID>, except the uuid property (will be generated) and
id (provided as <new name> argument).

164.

Usage: nmcli connection monitor { ARGUMENTS | help }

ARGUMENTS := [id | uuid | path] <ID> ...

Monitor connection profile activity.
This command prints a line whenever the specified connection changes.
Monitors all connection profiles in case none is specified.

167.

Usage: nmcli connection import { ARGUMENTS | help }

ARGUMENTS := [--temporary] type <type> file <file to import>

Import an external/foreign configuration as a NetworkManager connection profile.
The type of the input file is specified by type option.
Only VPN configurations are supported at the moment. The configuration
is imported by NetworkManager VPN plugins.

168.

Usage: nmcli connection export { ARGUMENTS | help }

ARGUMENTS := [id | uuid | path] <ID> [<output file>]

Export a connection. Only VPN connections are supported at the moment.
The data are directed to standard output or to a file if a name is given.

215.

missing colon in 'password' entry '%s'

216.

missing dot in 'password' entry '%s'

217.

invalid setting name in 'password' entry '%s'