|
309.
|
|
|
root@client:/etc/openvpn# ping 10.8.0.1
PING 10.8.0.1 (10.8.0.1) 56(84) bytes of data.
64 bytes from 10.8.0.1: icmp_req=1 ttl=64 time=0.920 ms
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
|
root@client:/etc/openvpn# ping 10.8.0.1
PING 10.8.0.1 (10.8.0.1) 56(84) bytes of data.
64 bytes from 10.8.0.1: icmp_req=1 ttl=64 time=0.920 ms
|
|
Translated by
Federico Lazcano
|
|
Reviewed by
Paco Molinero
|
|
|
|
Located in
serverguide/C/vpn.xml:392(programlisting)
|
|
310.
|
|
|
The OpenVPN server always uses the first usable IP address in the client network and only that IP is pingable. E.g. if you configured a /24 for the client network mask, the .1 address will be used. The P-t-P address you see in the ifconfig output above is usually not answering ping requests.
|
|
|
|
(no translation yet)
|
|
|
|
Located in
serverguide/C/vpn.xml:399(para)
|
|
311.
|
|
|
Check out your routes:
|
|
|
|
Revise sus rutas:
|
|
Translated and reviewed by
Paco Molinero
|
|
|
|
Located in
serverguide/C/vpn.xml:404(para)
|
|
312.
|
|
|
root@client:/etc/openvpn# netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.8.0.5 0.0.0.0 255.255.255.255 UH 0 0 0 tun0
10.8.0.1 10.8.0.5 255.255.255.255 UGH 0 0 0 tun0
192.168.42.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 192.168.42.1 0.0.0.0 UG 0 0 0 eth0
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
|
root@client:/etc/openvpn# netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.8.0.5 0.0.0.0 255.255.255.255 UH 0 0 0 tun0
10.8.0.1 10.8.0.5 255.255.255.255 UGH 0 0 0 tun0
192.168.42.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 192.168.42.1 0.0.0.0 UG 0 0 0 eth0
|
|
Translated by
Federico Lazcano
|
|
Reviewed by
Paco Molinero
|
|
|
|
Located in
serverguide/C/vpn.xml:407(programlisting)
|
|
313.
|
|
|
First trouble shooting
|
|
|
|
(no translation yet)
|
|
|
|
Located in
serverguide/C/vpn.xml:419(title)
|
|
314.
|
|
|
If the above didn't work for you, check this:
|
|
|
|
(no translation yet)
|
|
|
|
Located in
serverguide/C/vpn.xml:421(para)
|
|
315.
|
|
|
Check your journal, e.g. journalctl --identifier ovpn-server (for server.conf)
|
|
|
|
(no translation yet)
|
|
|
|
Located in
serverguide/C/vpn.xml:426(para)
|
|
316.
|
|
|
Check that you have specified the keyfile names correctly in client.conf and server.conf.
|
|
|
|
(no translation yet)
|
|
|
|
Located in
serverguide/C/vpn.xml:429(para)
|
|
317.
|
|
|
Can the client connect to the server machine? Maybe a firewall is blocking access? Check journal on server.
|
|
|
|
(no translation yet)
|
|
|
|
Located in
serverguide/C/vpn.xml:432(para)
|
|
318.
|
|
|
Client and server must use same protocol and port, e.g. UDP port 1194, see port and proto config option
|
|
|
|
(no translation yet)
|
|
|
|
Located in
serverguide/C/vpn.xml:435(para)
|