Browsing Hungarian translation

16.

PURPOSE:
Check that external line in connection works correctly
STEPS:
1. Use a cable to connect the line in port to an external line out source.
2. Open system sound preferences, 'Input' tab, select 'Line-in' on the connector list. Click the Test button
3. After a few seconds, your recording will be played back to you.
VERIFICATION:
Did you hear your recording?

17.

PURPOSE:
Check that system detects speakers or headphones being plugged in
STEPS:
1. Prepare a pair of headphones or speakers with a standard 3.5mm jack
2. Locate the speaker / headphone jack on the device under test
3. Run the test (you have 30 seconds from now on)
4. Plug headphones or speakers into the appropriate jack
5. Unplug the device for subsequent tests.
VERIFICATION:
Verification is automatic, no action is required.
The test times out after 30 seconds (and fails in that case).

18.

PURPOSE:
Check that system detects a microphone being plugged in
STEPS:
1. Prepare a microphone with a standard 3.5mm jack
2. Locate the microphone jack on the device under test.
Keep in mind that it may be shared with the headphone jack.
3. Run the test (you have 30 seconds from now on)
4. Plug the microphone into the appropriate jack
5. Unplug the device for subsequent tests.
VERIFICATION:
Verification is automatic, no action is required.
The test times out after 30 seconds (and fails in that case).

19.

PURPOSE:
Check that balance control works correctly on internal speakers
STEPS:
1. Check that moving the balance slider from left to right works smoothly
2. Click the Test button to play an audio tone for 10 seconds.
3. Move the balance slider from left to right and back.
4. Check that actual speaker audio balance follows your setting.
VERIFICATION:
Does the slider move smoothly, as well as being followed by the setting by the actual audio output?

20.

PURPOSE:
Check that balance control works correctly on external headphone
STEPS:
1. Check that moving the balance slider from left to right works smoothly
2. Click the Test button to play an audio tone for 10 seconds.
3. Move the balance slider from left to right and back.
4. Check that actual headphone audio balance follows your setting.
VERIFICATION:
Does the slider move smoothly, as well as being followed by the setting by the actual audio output?

61.

Run GiMark, a geometry instancing test (OpenGL 3.3) Windowed 1024x640 no antialiasing

62.

Run a tessellation test based on TessMark (OpenGL 4.0) Fullscreen 1920x1080 no antialiasing

63.

Run a tessellation test based on TessMark (OpenGL 4.0) Windowed 1024x640 no antialiasing

67.

PURPOSE:
This test will check that you can record and hear audio using a bluetooth audio device
STEPS:
1. Enable the bluetooth headset
2. Click on the sound icon
3. Click "Sound Settings"
4. Look for the device in the list and select it
5. Set Quality to A2DP
6. Click "Test" to record for five seconds and reproduce in the bluetooth device
VERIFICATION:
Did you hear the sound?

68.

PURPOSE:
This test will check that you can record and hear audio using a bluetooth audio device
STEPS:
1. Enable the bluetooth headset
2. Click on the bluetooth icon in the menu bar
3. Select 'Setup new device'
4. Look for the device in the list and select it
5. In the device write the PIN code automatically chosen by the wizard
6. The device should pair with the computer
7. Click the sound icon
8. Click "Sound Settings"
9. Select device and ensure Quality is set to "HSP/HFP"
10. Click "Test" to record for five seconds and reproduce in the bluetooth device
VERIFICATION:
Did you hear the sound you recorded in the bluetooth