|
24.
|
|
|
This test will verify that the volume levels are at an acceptable level on your local system. The test will validate that the volume is greater than or equal to minvol and less than or equal to maxvol for all sources (inputs) and sinks (outputs) recognized by PulseAudio. It will also validate that the active source and sink are not muted. You should not manually adjust the volume or mute before running this test.
|
|
|
description
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/audio.txt.in:185
|
|
25.
|
|
|
PURPOSE:
Check that external line out connection works correctly
STEPS:
1. Insert cable to speakers (with built-in amplifiers) on the line out port
2. Open system sound preferences, 'Output' tab, select 'Line-out' on the connector list. Click the Test button
3. On the system sound preferences, select 'Internal Audio' on the device list and click 'Test Speakers' to check left and right channel
VERIFICATION:
1. Do you hear a sound in the speakers? The internal speakers should *not* be muted automatically
2. Do you hear the sound coming out on the corresponding channel?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
目的:
檢查輸出至其他裝置 (Line-Out) 音源連接埠是否有正常運作
步驟:
1. 將音源線從有內建放大器的喇叭接到電腦上輸出至其他裝置 (Line-Out) 的音源連接埠
2. 打開系統音效設定,於「輸出」頁籤的裝置列表中選擇「輸出至其他裝置 (Line-Out)」,然後按下「測試」按鈕
3. 同樣於此頁籤中,選擇「內建音效」裝置並按下「測試聲音」來檢查左右聲道
檢查:
1. 您有聽到來自外接喇叭的聲音嗎?內建喇叭應該*不會*自動被靜音
2. 您有聽到聲音從相對應的聲道中播出嗎?
|
|
Translated and reviewed by
Po-Hsu Lin
|
|
|
|
Located in
../jobs/audio.txt.in:208
|
|
26.
|
|
|
PURPOSE:
Check that external line in connection works correctly
STEPS:
1. Use a cable to connect the line in port to an external line out source.
2. Open system sound preferences, 'Input' tab, select 'Line-in' on the connector list. Click the Test button
3. After a few seconds, your recording will be played back to you.
VERIFICATION:
Did you hear your recording?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
目的:
檢查自其他裝置輸入 (Line-In) 音源連接埠是否有正常運作
步驟:
1. 連接外部音源與電腦上的自其他裝置輸入 (Line-In) 音源連接埠
2. 打開系統音效設定,於「輸入」頁籤的裝置列表中選擇「自其他裝置輸入 (Line-In) 」並按下「測試」按鈕
3. 幾秒鐘後,電腦將會播放自外部音源錄下的聲音
檢查:
您有聽到自外部音源錄下的聲音嗎?
|
|
Translated and reviewed by
Po-Hsu Lin
|
|
|
|
Located in
../jobs/audio.txt.in:228
|
|
27.
|
|
|
PURPOSE:
Check that balance control works correctly on internal speakers
STEPS:
1. Check that moving the balance slider from left to right works smoothly
2. Click the Test button to play an audio tone for 10 seconds.
3. Move the balance slider from left to right and back.
4. Check that actual speaker audio balance follows your setting.
VERIFICATION:
Does the slider move smoothly, as well as being followed by the setting by the actual audio output?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
目的:
檢查音效輸出平衡控制是否能在內建喇叭上正常運作
步驟:
1. 檢查是否能由左到右順利的拖動音效輸出平衡設定條
2. 按下「測試」按鈕來播放一段約 10 秒鐘的音效
3. 將音效輸出平衡設定條由左移到右再移回來
4. 檢查喇叭是否有正確反應出該音效輸出平衡設定
檢查:
音效輸出平衡設定條是否能夠順利的被拖動,喇叭是否有正確反應出實際的音效平衡設定?
|
|
Translated and reviewed by
Po-Hsu Lin
|
|
|
|
Located in
../jobs/audio.txt.in:289
|
|
28.
|
|
|
PURPOSE:
Check that balance control works correctly on external headphone
STEPS:
1. Check that moving the balance slider from left to right works smoothly
2. Click the Test button to play an audio tone for 10 seconds.
3. Move the balance slider from left to right and back.
4. Check that actual headphone audio balance follows your setting.
VERIFICATION:
Does the slider move smoothly, as well as being followed by the setting by the actual audio output?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
目的:
檢查音效輸出平衡控制是否能在外接耳機上正常運作
步驟:
1. 檢查是否能由左到右順利的拖動音效輸出平衡設定條
2. 按下「測試」按鈕來播放一段約 10 秒鐘的音效
3. 將音效輸出平衡設定條由左移到右再移回來
4. 檢查耳機是否有正確反應出該音效輸出平衡設定
檢查:
音效輸出平衡設定條是否能夠順利的被拖動,耳機是否有正確反應出實際的音效平衡設定?
|
|
Translated and reviewed by
Po-Hsu Lin
|
|
|
|
Located in
../jobs/audio.txt.in:310
|
|
29.
|
|
|
Benchmark for each disk
|
|
|
description
|
|
|
|
針對各個磁碟進行效能測試
|
|
Translated and reviewed by
Po-Hsu Lin
|
|
|
|
Located in
../jobs/benchmarks.txt.in:18
|
|
30.
|
|
|
Run gtkperf to make sure that GTK based test cases work
|
|
|
description
|
|
|
|
執行 gtkperf 以確認基於 GTK 的測試項目能夠運作
|
|
Translated and reviewed by
Po-Hsu Lin
|
In upstream: |
|
執行 gtkperf 以確認基於 GTK 的測試案例成功.
|
|
|
Suggested by
poloshiao
|
|
|
|
Located in
../jobs/benchmarks.txt.in:35
|
|
31.
|
|
|
Run Render-Bench XRender/Imlib2 benchmark
|
|
|
description
|
|
|
|
執行 Render-Bench XRender/Imlib2 效能測試
|
|
Translated and reviewed by
Po-Hsu Lin
|
|
|
|
Located in
../jobs/benchmarks.txt.in:43
|
|
32.
|
|
|
Run Qgears2 XRender Extension gearsfancy benchmark
|
|
|
description
|
|
|
|
執行 Qgears2 XRender 延伸套件 gearsfancy 效能測試
|
|
Translated and reviewed by
Po-Hsu Lin
|
|
|
|
Located in
../jobs/benchmarks.txt.in:50
|
|
33.
|
|
|
Run Qgears2 XRender Extension image scaling benchmark
|
|
|
description
|
|
|
|
執行 Qgears2 XRender Extension 影像縮放效能測試
|
|
Translated and reviewed by
Po-Hsu Lin
|
|
|
|
Located in
../jobs/benchmarks.txt.in:57
|