Translations by Anthony Harrington
Anthony Harrington has submitted the following strings to this translation. Contributions are visually coded: currently used translations, unreviewed suggestions, rejected suggestions.
1 → 12 of 12 results | First • Previous • Next • Last |
84. |
Usage: %s [OPTION]... [FILE]...
-h, --help help
--version print current version
-l, --list-devices list all soundcards and digital audio devices
-L, --list-pcms list device names
-D, --device=NAME select PCM by name
-q, --quiet quiet mode
-t, --file-type TYPE file type (voc, wav, raw or au)
-c, --channels=# channels
-f, --format=FORMAT sample format (case insensitive)
-r, --rate=# sample rate
-d, --duration=# interrupt after # seconds
-M, --mmap mmap stream
-N, --nonblock nonblocking mode
-F, --period-time=# distance between interrupts is # microseconds
-B, --buffer-time=# buffer duration is # microseconds
--period-size=# distance between interrupts is # frames
--buffer-size=# buffer duration is # frames
-A, --avail-min=# min available space for wakeup is # microseconds
-R, --start-delay=# delay for automatic PCM start is # microseconds
(relative to buffer size if <= 0)
-T, --stop-delay=# delay for automatic PCM stop is # microseconds from xrun
-v, --verbose show PCM structure and setup (accumulative)
-V, --vumeter=TYPE enable VU meter (TYPE: mono or stereo)
-I, --separate-channels one file for each channel
-i, --interactive allow interactive operation from stdin
-m, --chmap=ch1,ch2,.. Give the channel map to override or follow
--disable-resample disable automatic rate resample
--disable-channels disable automatic channel conversions
--disable-format disable automatic format conversions
--disable-softvol disable software volume control (softvol)
--test-position test ring buffer position
--test-coef=# test coefficient for ring buffer position (default 8)
expression for validation is: coef * (buffer_size / 2)
--test-nowait do not wait for ring buffer - eats whole CPU
--max-file-time=# start another output file when the old file has recorded
for this many seconds
--process-id-file write the process ID here
--use-strftime apply the strftime facility to the output file name
--dump-hw-params dump hw_params of the device
--fatal-errors treat all errors as fatal
|
|
2013-07-26 |
Usage: %s [OPTION]... [FILE]...
-h, --help help
--version print current version
-l, --list-devices list all soundcards and digital audio devices
-L, --list-pcms list device names
-D, --device=NAME select PCM by name
-q, --quiet quiet mode
-t, --file-type TYPE file type (voc, wav, raw or au)
-c, --channels=# channels
-f, --format=FORMAT sample format (case insensitive)
-r, --rate=# sample rate
-d, --duration=# interrupt after # seconds
-M, --mmap mmap stream
-N, --nonblock nonblocking mode
-F, --period-time=# distance between interrupts is # microseconds
-B, --buffer-time=# buffer duration is # microseconds
--period-size=# distance between interrupts is # frames
--buffer-size=# buffer duration is # frames
-A, --avail-min=# min available space for wakeup is # microseconds
-R, --start-delay=# delay for automatic PCM start is # microseconds
(relative to buffer size if <= 0)
-T, --stop-delay=# delay for automatic PCM stop is # microseconds from xrun
-v, --verbose show PCM structure and setup (accumulative)
-V, --vumeter=TYPE enable VU meter (TYPE: mono or stereo)
-I, --separate-channels one file for each channel
-i, --interactive allow interactive operation from stdin
-m, --chmap=ch1,ch2,.. Give the channel map to override or follow
--disable-resample disable automatic rate resample
--disable-channels disable automatic channel conversions
--disable-format disable automatic format conversions
--disable-softvol disable software volume control (softvol)
--test-position test ring buffer position
--test-coef=# test coefficient for ring buffer position (default 8)
expression for validation is: coef * (buffer_size / 2)
--test-nowait do not wait for ring buffer - eats whole CPU
--max-file-time=# start another output file when the old file has recorded
for this many seconds
--process-id-file write the process ID here
--use-strftime apply the strftime facility to the output file name
--dump-hw-params dump hw_params of the device
--fatal-errors treat all errors as fatal
|
|
87. |
The available format shortcuts are:
|
|
2013-07-26 |
The available format shortcuts are:
|
|
102. |
Unable to parse channel map string: %s
|
|
2013-07-26 |
Unable to parse channel map string: %s
|
|
116. |
Warning: format is changed to %s
|
|
2013-07-26 |
Warning: format is changed to %s
|
|
122. |
Channel numbers don't match between hw_params and channel map
|
|
2013-07-26 |
Channel numbers don't match between hw_params and channel map
|
|
123. |
Warning: unable to get channel map
|
|
2013-07-26 |
Warning: unable to get channel map
|
|
124. |
Channel %d doesn't match with hw_parmas
|
|
2013-07-26 |
Channel %d doesn't match with hw_parmas
|
|
126. |
HW Params of device "%s":
|
|
2013-07-26 |
HW Params of device "%s":
|
|
142. |
fatal %s: %s
|
|
2013-07-26 |
fatal %s: %s
|
|
220. |
-p,--port # : specify TCP port (digit or service name)
|
|
2013-07-26 |
-p,--port # : specify TCP port (digit or service name)
|
|
279. |
Unable to set channel map: %s
|
|
2013-07-26 |
Unable to set channel map: %s
|
|
293. |
Usage: speaker-test [OPTION]...
-h,--help help
-D,--device playback device
-r,--rate stream rate in Hz
-c,--channels count of channels in stream
-f,--frequency sine wave frequency in Hz
-F,--format sample format
-b,--buffer ring buffer size in us
-p,--period period size in us
-P,--nperiods number of periods
-t,--test pink=use pink noise, sine=use sine wave, wav=WAV file
-l,--nloops specify number of loops to test, 0 = infinite
-s,--speaker single speaker test. Values 1=Left, 2=right, etc
-w,--wavfile Use the given WAV file as a test sound
-W,--wavdir Specify the directory containing WAV files
-m,--chmap Specify the channel map to override
-X,--force-frequency force frequencies outside the 30-8000hz range
-S,--scale Scale of generated test tones in percent (default=80)
|
|
2016-01-04 |
Usage: speaker-test [OPTION]...
-h,--help help
-D,--device playback device
-r,--rate stream rate in Hz
-c,--channels count of channels in stream
-f,--frequency sine wave frequency in Hz
-F,--format sample format
-b,--buffer ring buffer size in us
-p,--period period size in us
-P,--nperiods number of periods
-t,--test pink=use pink noise, sine=use sine wave, wav=WAV file
-l,--nloops specify number of loops to test, 0 = infinite
-s,--speaker single speaker test. Values 1=Left, 2=right, etc
-w,--wavfile Use the given WAV file as a test sound
-W,--wavdir Specify the directory containing WAV files
-m,--chmap Specify the channel map to override
-X,--force-frequency force frequencies outside the 30-8000hz range
-S,--scale Scale of generated test tones in percent (default=80)
|