Browsing Vietnamese translation

382.

Copyright (C) 2011 Free Software Foundation, Inc.

400.

cd [-L|[-P [-e]]] [dir]

406.

declare [-aAfFgilrtux] [-p] [name[=value] ...]

478.

Change the shell working directory.

Change the current directory to DIR. The default DIR is the value of the
HOME shell variable.

The variable CDPATH defines the search path for the directory containing
DIR. Alternative directory names in CDPATH are separated by a colon (:).
A null directory name is the same as the current directory. If DIR begins
with a slash (/), then CDPATH is not used.

If the directory is not found, and the shell option `cdable_vars' is set,
the word is assumed to be a variable name. If that variable has a value,
its value is used for DIR.

Options:
-L[tab]force symbolic links to be followed
-P[tab]use the physical directory structure without following symbolic
[tab]links
-e[tab]if the -P option is supplied, and the current working directory
[tab]cannot be determined successfully, exit with a non-zero status

The default is to follow symbolic links, as if `-L' were specified.

Exit Status:
Returns 0 if the directory is changed, and if $PWD is set successfully when
-P is used; non-zero otherwise.

484.

Set variable values and attributes.

Declare variables and give them attributes. If no NAMEs are given,
display the attributes and values of all variables.

Options:
-f[tab]restrict action or display to function names and definitions
-F[tab]restrict display to function names only (plus line number and
[tab]source file when debugging)
-g[tab]create global variables when used in a shell function; otherwise
[tab]ignored
-p[tab]display the attributes and value of each NAME

Options which set attributes:
-a[tab]to make NAMEs indexed arrays (if supported)
-A[tab]to make NAMEs associative arrays (if supported)
-i[tab]to make NAMEs have the `integer' attribute
-l[tab]to convert NAMEs to lower case on assignment
-r[tab]to make NAMEs readonly
-t[tab]to make NAMEs have the `trace' attribute
-u[tab]to convert NAMEs to upper case on assignment
-x[tab]to make NAMEs export

Using `+' instead of `-' turns off the given attribute.

Variables with the integer attribute have arithmetic evaluation (see
the `let' command) performed when the variable is assigned a value.

When used in a function, `declare' makes NAMEs local, as with the `local'
command. The `-g' option suppresses this behavior.

Exit Status:
Returns success unless an invalid option is supplied or an error occurs.

501.

Display status of jobs.

Lists the active jobs. JOBSPEC restricts output to that job.
Without options, the status of all active jobs is displayed.

Options:
-l[tab]lists process IDs in addition to the normal information
-n[tab]list only processes that have changed status since the last
[tab]notification
-p[tab]lists process IDs only
-r[tab]restrict output to running jobs
-s[tab]restrict output to stopped jobs

If -x is supplied, COMMAND is run after all job specifications that
appear in ARGS have been replaced with the process ID of that job's
process group leader.

Exit Status:
Returns success unless an invalid option is given or an error occurs.
If -x is used, returns the exit status of COMMAND.

505.

Read a line from the standard input and split it into fields.

Reads a single line from the standard input, or from file descriptor FD
if the -u option is supplied. The line is split into fields as with word
splitting, and the first word is assigned to the first NAME, the second
word to the second NAME, and so on, with any leftover words assigned to
the last NAME. Only the characters found in $IFS are recognized as word
delimiters.

If no NAMEs are supplied, the line read is stored in the REPLY variable.

Options:
-a array[tab]assign the words read to sequential indices of the array
[tab][tab]variable ARRAY, starting at zero
-d delim[tab]continue until the first character of DELIM is read, rather
[tab][tab]than newline
-e[tab][tab]use Readline to obtain the line in an interactive shell
-i text[tab]Use TEXT as the initial text for Readline
-n nchars[tab]return after reading NCHARS characters rather than waiting
[tab][tab]for a newline, but honor a delimiter if fewer than NCHARS
[tab][tab]characters are read before the delimiter
-N nchars[tab]return only after reading exactly NCHARS characters, unless
[tab][tab]EOF is encountered or read times out, ignoring any delimiter
-p prompt[tab]output the string PROMPT without a trailing newline before
[tab][tab]attempting to read
-r[tab][tab]do not allow backslashes to escape any characters
-s[tab][tab]do not echo input coming from a terminal
-t timeout[tab]time out and return failure if a complete line of input is
[tab][tab]not read withint TIMEOUT seconds. The value of the TMOUT
[tab][tab]variable is the default timeout. TIMEOUT may be a
[tab][tab]fractional number. If TIMEOUT is 0, read returns success only
[tab][tab]if input is available on the specified file descriptor. The
[tab][tab]exit status is greater than 128 if the timeout is exceeded
-u fd[tab][tab]read from file descriptor FD instead of the standard input

Exit Status:
The return code is zero, unless end-of-file is encountered, read times out,
or an invalid file descriptor is supplied as the argument to -u.

507.

Set or unset values of shell options and positional parameters.

Change the value of shell attributes and positional parameters, or
display the names and values of shell variables.

Options:
-a Mark variables which are modified or created for export.
-b Notify of job termination immediately.
-e Exit immediately if a command exits with a non-zero status.
-f Disable file name generation (globbing).
-h Remember the location of commands as they are looked up.
-k All assignment arguments are placed in the environment for a
command, not just those that precede the command name.
-m Job control is enabled.
-n Read commands but do not execute them.
-o option-name
Set the variable corresponding to option-name:
allexport same as -a
braceexpand same as -B
emacs use an emacs-style line editing interface
errexit same as -e
errtrace same as -E
functrace same as -T
hashall same as -h
histexpand same as -H
history enable command history
ignoreeof the shell will not exit upon reading EOF
interactive-comments
allow comments to appear in interactive commands
keyword same as -k
monitor same as -m
noclobber same as -C
noexec same as -n
noglob same as -f
nolog currently accepted but ignored
notify same as -b
nounset same as -u
onecmd same as -t
physical same as -P
pipefail the return value of a pipeline is the status of
the last command to exit with a non-zero status,
or zero if no command exited with a non-zero status
posix change the behavior of bash where the default
operation differs from the Posix standard to
match the standard
privileged same as -p
verbose same as -v
vi use a vi-style line editing interface
xtrace same as -x
-p Turned on whenever the real and effective user ids do not match.
Disables processing of the $ENV file and importing of shell
functions. Turning this option off causes the effective uid and
gid to be set to the real uid and gid.
-t Exit after reading and executing one command.
-u Treat unset variables as an error when substituting.
-v Print shell input lines as they are read.
-x Print commands and their arguments as they are executed.
-B the shell will perform brace expansion
-C If set, disallow existing regular files to be overwritten
by redirection of output.
-E If set, the ERR trap is inherited by shell functions.
-H Enable ! style history substitution. This flag is on
by default when the shell is interactive.
-P If set, do not follow symbolic links when executing commands
such as cd which change the current directory.
-T If set, the DEBUG trap is inherited by shell functions.
-- Assign any remaining arguments to the positional parameters.
If there are no remaining arguments, the positional parameters
are unset.
- Assign any remaining arguments to the positional parameters.
The -x and -v options are turned off.

Using + rather than - causes these flags to be turned off. The
flags can also be used upon invocation of the shell. The current
set of flags may be found in $-. The remaining n ARGs are positional
parameters and are assigned, in order, to $1, $2, .. $n. If no
ARGs are given, all shell variables are printed.

Exit Status:
Returns success unless an invalid option is given.

508.

Unset values and attributes of shell variables and functions.

For each NAME, remove the corresponding variable or function.

Options:
-f[tab]treat each NAME as a shell function
-v[tab]treat each NAME as a shell variable

Without options, unset first tries to unset a variable, and if that fails,
tries to unset a function.

Some variables cannot be unset; also see `readonly'.

Exit Status:
Returns success unless an invalid option is given or a NAME is read-only.

510.

Mark shell variables as unchangeable.

Mark each NAME as read-only; the values of these NAMEs may not be
changed by subsequent assignment. If VALUE is supplied, assign VALUE
before marking as read-only.

Options:
-a[tab]refer to indexed array variables
-A[tab]refer to associative array variables
-f[tab]refer to shell functions
-p[tab]display a list of all readonly variables and functions

An argument of `--' disables further option processing.

Exit Status:
Returns success unless an invalid option is given or NAME is invalid.