Browsing Brazilian Portuguese translation

506.

Set or unset values of shell options and positional parameters.

Change the value of shell attributes and positional parameters, or
display the names and values of shell variables.

Options:
-a Mark variables which are modified or created for export.
-b Notify of job termination immediately.
-e Exit immediately if a command exits with a non-zero status.
-f Disable file name generation (globbing).
-h Remember the location of commands as they are looked up.
-k All assignment arguments are placed in the environment for a
command, not just those that precede the command name.
-m Job control is enabled.
-n Read commands but do not execute them.
-o option-name
Set the variable corresponding to option-name:
allexport same as -a
braceexpand same as -B
emacs use an emacs-style line editing interface
errexit same as -e
errtrace same as -E
functrace same as -T
hashall same as -h
histexpand same as -H
history enable command history
ignoreeof the shell will not exit upon reading EOF
interactive-comments
allow comments to appear in interactive commands
keyword same as -k
monitor same as -m
noclobber same as -C
noexec same as -n
noglob same as -f
nolog currently accepted but ignored
notify same as -b
nounset same as -u
onecmd same as -t
physical same as -P
pipefail the return value of a pipeline is the status of
the last command to exit with a non-zero status,
or zero if no command exited with a non-zero status
posix change the behavior of bash where the default
operation differs from the Posix standard to
match the standard
privileged same as -p
verbose same as -v
vi use a vi-style line editing interface
xtrace same as -x
-p Turned on whenever the real and effective user ids do not match.
Disables processing of the $ENV file and importing of shell
functions. Turning this option off causes the effective uid and
gid to be set to the real uid and gid.
-t Exit after reading and executing one command.
-u Treat unset variables as an error when substituting.
-v Print shell input lines as they are read.
-x Print commands and their arguments as they are executed.
-B the shell will perform brace expansion
-C If set, disallow existing regular files to be overwritten
by redirection of output.
-E If set, the ERR trap is inherited by shell functions.
-H Enable ! style history substitution. This flag is on
by default when the shell is interactive.
-P If set, do not follow symbolic links when executing commands
such as cd which change the current directory.
-T If set, the DEBUG trap is inherited by shell functions.
- Assign any remaining arguments to the positional parameters.
The -x and -v options are turned off.

Using + rather than - causes these flags to be turned off. The
flags can also be used upon invocation of the shell. The current
set of flags may be found in $-. The remaining n ARGs are positional
parameters and are assigned, in order, to $1, $2, .. $n. If no
ARGs are given, all shell variables are printed.

Exit Status:
Returns success unless an invalid option is given.

513.

Evaluate conditional expression.

Exits with a status of 0 (true) or 1 (false) depending on
the evaluation of EXPR. Expressions may be unary or binary. Unary
expressions are often used to examine the status of a file. There
are string operators as well, and numeric comparison operators.

File operators:

-a FILE True if file exists.
-b FILE True if file is block special.
-c FILE True if file is character special.
-d FILE True if file is a directory.
-e FILE True if file exists.
-f FILE True if file exists and is a regular file.
-g FILE True if file is set-group-id.
-h FILE True if file is a symbolic link.
-L FILE True if file is a symbolic link.
-k FILE True if file has its `sticky' bit set.
-p FILE True if file is a named pipe.
-r FILE True if file is readable by you.
-s FILE True if file exists and is not empty.
-S FILE True if file is a socket.
-t FD True if FD is opened on a terminal.
-u FILE True if the file is set-user-id.
-w FILE True if the file is writable by you.
-x FILE True if the file is executable by you.
-O FILE True if the file is effectively owned by you.
-G FILE True if the file is effectively owned by your group.
-N FILE True if the file has been modified since it was last read.

FILE1 -nt FILE2 True if file1 is newer than file2 (according to
modification date).

FILE1 -ot FILE2 True if file1 is older than file2.

FILE1 -ef FILE2 True if file1 is a hard link to file2.

String operators:

-z STRING True if string is empty.

-n STRING
STRING True if string is not empty.

STRING1 = STRING2
True if the strings are equal.
STRING1 != STRING2
True if the strings are not equal.
STRING1 < STRING2
True if STRING1 sorts before STRING2 lexicographically.
STRING1 > STRING2
True if STRING1 sorts after STRING2 lexicographically.

Other operators:

-o OPTION True if the shell option OPTION is enabled.
! EXPR True if expr is false.
EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.
EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.

arg1 OP arg2 Arithmetic tests. OP is one of -eq, -ne,
-lt, -le, -gt, or -ge.

Arithmetic binary operators return true if ARG1 is equal, not-equal,
less-than, less-than-or-equal, greater-than, or greater-than-or-equal
than ARG2.

Exit Status:
Returns success if EXPR evaluates to true; fails if EXPR evaluates to
false or an invalid argument is given.

516.

Trap signals and other events.

Defines and activates handlers to be run when the shell receives signals
or other conditions.

ARG is a command to be read and executed when the shell receives the
signal(s) SIGNAL_SPEC. If ARG is absent (and a single SIGNAL_SPEC
is supplied) or `-', each specified signal is reset to its original
value. If ARG is the null string each SIGNAL_SPEC is ignored by the
shell and by the commands it invokes.

If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell. If
a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.

If no arguments are supplied, trap prints the list of commands associated
with each signal.

Options:
-l[tab]print a list of signal names and their corresponding numbers
-p[tab]display the trap commands associated with each SIGNAL_SPEC

Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal number.
Signal names are case insensitive and the SIG prefix is optional. A
signal may be sent to the shell with "kill -signal $$".

Exit Status:
Returns success unless a SIGSPEC is invalid or an invalid option is given.

541.

Formats and prints ARGUMENTS under control of the FORMAT.

Options:
-v var[tab]assign the output to shell variable VAR rather than
[tab][tab]display it on the standard output

FORMAT is a character string which contains three types of objects: plain
characters, which are simply copied to standard output; character escape
sequences, which are converted and copied to the standard output; and
format specifications, each of which causes printing of the next successive
argument.

In addition to the standard format specifications described in printf(1)
and printf(3), printf interprets:

%b[tab]expand backslash escape sequences in the corresponding argument
%q[tab]quote the argument in a way that can be reused as shell input

Exit Status:
Returns success unless an invalid option is given or a write or assignment
error occurs.

544.

Modify or display completion options.

Modify the completion options for each NAME, or, if no NAMEs are supplied,
the completion currently begin executed. If no OPTIONs are givenm, print
the completion options for each NAME or the current completion specification.

Options:
[tab]-o option[tab]Set completion option OPTION for each NAME
[tab]-D[tab][tab]Change options for the "default" command completion
[tab]-E[tab][tab]Change options for the "empty" command completion

Using `+o' instead of `-o' turns off the specified option.

Arguments:

Each NAME refers to a command for which a completion specification must
have previously been defined using the `complete' builtin. If no NAMEs
are supplied, compopt must be called by a function currently generating
completions, and the options for that currently-executing completion
generator are modified.

Exit Status:
Returns success unless an invalid option is supplied or NAME does not
have a completion specification defined.

545.

Read lines from the standard input into an indexed array variable.

Read lines from the standard input into the indexed array variable ARRAY, or
from file descriptor FD if the -u option is supplied. The variable MAPFILE
is the default ARRAY.

Options:
-n count[tab]Copy at most COUNT lines. If COUNT is 0, all lines are copied.
-O origin[tab]Begin assigning to ARRAY at index ORIGIN. The default index is 0.
-s count [tab]Discard the first COUNT lines read.
-t[tab][tab]Remove a trailing newline from each line read.
-u fd[tab][tab]Read lines from file descriptor FD instead of the standard input.
-C callback[tab]Evaluate CALLBACK each time QUANTUM lines are read.
-c quantum[tab]Specify the number of lines read between each call to CALLBACK.

Arguments:
ARRAY[tab][tab]Array variable name to use for file data.

If -C is supplied without -c, the default quantum is 5000. When
CALLBACK is evaluated, it is supplied the index of the next array
element to be assigned as an additional argument.

If not supplied with an explicit origin, mapfile will clear ARRAY before
assigning to it.

Exit Status:
Returns success unless an invalid option is given or ARRAY is readonly or
not an indexed array.