|
|
235.
|
|
|
Modules to load:
|
|
|
Type: multiselect
Description
:sl2:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../hw-detect.templates:5001
|
|
|
236.
|
|
|
The following Linux kernel modules were detected as matching your hardware. If you know some are unnecessary, or cause problems, you can choose not to load them. If you're unsure, you should leave them all selected.
|
|
|
Type: multiselect
Description
:sl2:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../hw-detect.templates:5001
|
|
|
237.
|
|
|
Start PC card services?
|
|
|
Type: boolean
Description
FIXME: not in use and kept just while we're still in doubt it will
be needed
:sl2:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../hw-detect.templates:6001
|
|
|
238.
|
|
|
Please choose whether PC card services should be started in order to allow the use of PCMCIA cards.
|
|
|
Type: boolean
Description
FIXME: not in use and kept just while we're still in doubt it will
be needed
:sl2:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../hw-detect.templates:6001
|
|
|
239.
|
|
|
PCMCIA resource range options:
|
|
|
Type: string
Description
:sl2:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../hw-detect.templates:7001
|
|
|
240.
|
|
|
Some PCMCIA hardware needs special resource configuration options in order to work, and can cause the computer to freeze otherwise. For example, some Dell laptops need "exclude port 0x800-0x8ff" to be specified here. These options will be added to /etc/pcmcia/config.opts. See the installation manual or the PCMCIA HOWTO for more information.
|
|
|
Type: string
Description
:sl2:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../hw-detect.templates:7001
|
|
|
241.
|
|
|
For most hardware, you do not need to specify anything here.
|
|
|
Type: string
Description
:sl2:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../hw-detect.templates:7001
|
|
|
242.
|
|
|
Additional parameters for module ${MODULE}:
|
|
|
Type: string
Description
:sl3:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../hw-detect.templates:8001
|
|
|
243.
|
|
|
The module ${MODULE} failed to load. You may need to pass parameters to the module to make it work; this is common with older hardware. These parameters are often I/O port and IRQ numbers that vary from machine to machine and cannot be determined from the hardware. An example string looks something like "irq=7 io=0x220"
|
|
|
Type: string
Description
:sl3:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../hw-detect.templates:8001
|
|
|
244.
|
|
|
If you don't know what to enter, consult your documentation, or leave it blank to not load the module.
|
|
|
Type: string
Description
:sl3:
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../hw-detect.templates:8001
|
