Browsing Occitan (post 1500) translation

46.

<acronym>DHCP</acronym> (Dynamic Host Configuration Protocol) is a networking protocol that allows your system to obtain an <acronym>IP</acronym> (Internet Protocol) address, gateway address, netmask, as well as <acronym>DNS</acronym> (Domain Name System) addresses. Using DHCP is setup by default for each network interface installed into the system. This makes connecting easier and seamless in most situations. Please <xref linkend="network-connect-settings"/>.

48.

Ethernet adapters are the most common types of networking interfaces in use today. Ethernet is physically connected with a cable to either your broadband modem, router or switch, or another <acronym>PC</acronym>. The most common type of cable in use is know as Category-5 (<acronym>CAT</acronym>-5). It looks similar to the typical telephone cable, but instead of four wires inside the cable there are eight. For an example of what a <acronym>CAT</acronym>-5 cable looks like, please review <ulink url="http://en.wikipedia.org/wiki/Cat-5"/>.

49.

A majority of users who are using this form of Ethernet for a connection are not going to run into any problems. If you do in fact run into an issue connecting with this type of connection, the following could potentially assist you in fixing your issue.

54.

From within the <guilabel>Network Connection</guilabel> window there is a tab named <guilabel>Network Interfaces</guilabel>. Hopefully you will see your adapter labeled something like <guilabel>eth0</guilabel>. If there is an issue with the card or the settings, usually the system will automatically disable the card. If the card is disabled, you will see <guilabel>X Disabled</guilabel> under the <guilabel>State</guilabel> column. To enable the device, simply press the <guibutton>Administrator Mode...</guibutton> at the bottom of the window. This will open a password dialog in which you enter your username's password. Once you have entered this mode, simply press the <guibutton>Enable Interface</guibutton> button. If there are issues enabling the device, you will be notified with an error. To see the settings of this device, press the <guibutton>Configure Interface...</guibutton> button. The window that opens will allow you to manually configure your network settings to match your network.

57.

Terminal Program (Konsole)

58.

The main file that the user will be working with is <filename>/etc/network/interfaces</filename>. A typical default <filename>interfaces</filename> file will look similar to the following:

62.

If you are planning on using <application>KNetworkManager</application> it is advised that you <emphasis role="bold">DO NOT</emphasis> edit <filename>/etc/network/interfaces</filename> unless it is necessary to get your network connection working. If you do manually edit your <filename>/etc/network/interfaces</filename> then <application>KNetworkManager</application> will not work.

64.

Wireless networking has gotten better with Kubuntu 9.10, however there are still problems for users who do not have a card supported natively. If you have not purchased a wireless card yet, please take a look at the supported hardware at <ulink url="https://help.ubuntu.com/community/WifiDocs/WirelessCardsSupported"/>.

67.

If your wireless card has been detected, <application>KNetworkManager</application> will have a menu entry listing your wireless device. You can attempt to connect to your wireless network by clicking on the System Tray icon and selecting your wireless network. If you are able to browse the network with the a web browser, you have successfully connected to the internet.

69.

With <application>KNetworkManager</application> you simple click the application icon in the system tray and select the wireless network you want to connect to. When you click on a network that has encryption enabled, you will get a pop-up dialog to enter this information. Once entered, this information is stored within the <application>KWallet</application> utility. This allows you to connect to that network in the future just by entering your <application>KWallet</application> password.