Browsing Polish translation

6.

Some of the defaults that the installer uses can be influenced by passing boot arguments when &d-i; is started. If, for example, you wish to force static network configuration (DHCP is used by default if available), you could add the boot parameter <userinput>netcfg/disable_dhcp=true</userinput>. See <xref linkend="installer-args"/> for available options.

7.

Power users may be more comfortable with a menu-driven interface, where each step is controlled by the user rather than the installer performing each step automatically in sequence. To use the installer in a manual, menu-driven way, add the boot argument <userinput>priority=medium</userinput>.

8.

If your hardware requires you to pass options to kernel modules as they are installed, you will need to start the installer in <quote>expert</quote> mode. This can be done by either using the <command>expert</command> command to start the installer or by adding the boot argument <userinput>priority=low</userinput>. Expert mode gives you full control over &d-i;.

9.

For this architecture the &d-i; supports two different user interfaces: a character-based one and a graphical one. The character-based interface is used by default unless you selected the <quote>Graphical install</quote> option in the initial boot menu. For more information about the graphical installer, please refer to <xref linkend="graphical"/>.

10.

For this architecture the installer uses a character-based user interface. A graphical user interface is currently not available.

11.

In the character-based environment the use of a mouse is not supported. Here are the keys you can use to navigate within the various dialogs. The <keycap>Tab</keycap> or <keycap>right</keycap> arrow keys move <quote>forward</quote>, and the <keycombo> <keycap>Shift</keycap> <keycap>Tab</keycap> </keycombo> or <keycap>left</keycap> arrow keys move <quote>backward</quote> between displayed buttons and selections. The <keycap>up</keycap> and <keycap>down</keycap> arrow select different items within a scrollable list, and also scroll the list itself. In addition, in long lists, you can type a letter to cause the list to scroll directly to the section with items starting with the letter you typed and use <keycap>Pg-Up</keycap> and <keycap>Pg-Down</keycap> to scroll the list in sections. The <keycap>space bar</keycap> selects an item such as a checkbox. Use &enterkey; to activate choices.

13.

Error messages and logs are redirected to the fourth console. You can access this console by pressing <keycombo><keycap>Left Alt</keycap><keycap>F4</keycap></keycombo> (hold the left <keycap>Alt</keycap> key while pressing the <keycap>F4</keycap> function key); get back to the main installer process with <keycombo><keycap>Left Alt</keycap><keycap>F1</keycap></keycombo>.

14.

These messages can also be found in <filename>/var/log/syslog</filename>. After installation, this log is copied to <filename>/var/log/installer/syslog</filename> on your new system. Other installation messages may be found in <filename>/var/log/</filename> during the installation, and <filename>/var/log/installer/</filename> after the computer has been booted into the installed system.

18.

Shows the list of components to the user during installer operation, and starts a component when it is selected. Main-menu's questions are set to priority medium, so if your priority is set to high or critical (high is the default), you will not see the menu. On the other hand, if there is an error which requires your intervention, the question priority may be downgraded temporarily to allow you to resolve the problem, and in that case the menu may appear.

19.

You can get to the main menu by selecting the &BTN-GOBACK; button repeatedly to back all the way out of the currently running component.