Browsing Punjabi translation

20.

Error: error connecting to system bus: %s

45.

Usage: nmcli connection { COMMAND | help }

COMMAND := { show | up | down | add | modify | clone | edit | delete | monitor | reload | load | import | export }

show [--active] [--order <order spec>]
show [--active] [id | uuid | path | apath] <ID> ...

up [[id | uuid | path] <ID>] [ifname <ifname>] [ap <BSSID>] [passwd-file <file with passwords>]

down [id | uuid | path | apath] <ID> ...

add COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS SLAVE_OPTIONS IP_OPTIONS [-- ([+|-]<setting>.<property> <value>)+]

modify [--temporary] [id | uuid | path] <ID> ([+|-]<setting>.<property> <value>)+

clone [--temporary] [id | uuid | path ] <ID> <new name>

edit [id | uuid | path] <ID>
edit [type <new_con_type>] [con-name <new_con_name>]

delete [id | uuid | path] <ID>

monitor [id | uuid | path] <ID> ...

reload

load <filename> [ <filename>... ]

import [--temporary] type <type> file <file to import>

export [id | uuid | path] <ID> [<output file>]

46.

Usage: nmcli connection show { ARGUMENTS | help }

ARGUMENTS := [--active] [--order <order spec>]

List in-memory and on-disk connection profiles, some of which may also be
active if a device is using that connection profile. Without a parameter, all
profiles are listed. When --active option is specified, only the active
profiles are shown. --order allows custom connection ordering (see manual page).

ARGUMENTS := [--active] [id | uuid | path | apath] <ID> ...

Show details for specified connections. By default, both static configuration
and active connection data are displayed. It is possible to filter the output
using global '--fields' option. Refer to the manual page for more information.
When --active option is specified, only the active profiles are taken into
account. Use global --show-secrets option to reveal associated secrets as well.

47.

Usage: nmcli connection up { ARGUMENTS | help }

ARGUMENTS := [id | uuid | path] <ID> [ifname <ifname>] [ap <BSSID>] [nsp <name>] [passwd-file <file with passwords>]

Activate a connection on a device. The profile to activate is identified by its
name, UUID or D-Bus path.

ARGUMENTS := ifname <ifname> [ap <BSSID>] [nsp <name>] [passwd-file <file with passwords>]

Activate a device with a connection. The connection profile is selected
automatically by NetworkManager.

ifname - specifies the device to active the connection on
ap - specifies AP to connect to (only valid for Wi-Fi)
nsp - specifies NSP to connect to (only valid for WiMAX)
passwd-file - file with password(s) required to activate the connection

48.

Usage: nmcli connection down { ARGUMENTS | help }

ARGUMENTS := [id | uuid | path | apath] <ID> ...

Deactivate a connection from a device (without preventing the device from
further auto-activation). The profile to deactivate is identified by its name,
UUID or D-Bus path.

49.

Usage: nmcli connection add { ARGUMENTS | help }

ARGUMENTS := COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS SLAVE_OPTIONS IP_OPTIONS [-- ([+|-]<setting>.<property> <value>)+]

COMMON_OPTIONS:
type <type>
ifname <interface name> | "*"
[con-name <connection name>]
[autoconnect yes|no]
[save yes|no]
[master <master (ifname, or connection UUID or name)>]
[slave-type <master connection type>]

TYPE_SPECIFIC_OPTIONS:
ethernet: [mac <MAC address>]
[cloned-mac <cloned MAC address>]
[mtu <MTU>]

wifi: ssid <SSID>
[mac <MAC address>]
[cloned-mac <cloned MAC address>]
[mtu <MTU>]
[mode infrastructure|ap|adhoc]

wimax: [mac <MAC address>]
[nsp <NSP>]

pppoe: username <PPPoE username>
[password <PPPoE password>]
[service <PPPoE service name>]
[mtu <MTU>]
[mac <MAC address>]

gsm: apn <APN>
[user <username>]
[password <password>]

cdma: [user <username>]
[password <password>]

infiniband: [mac <MAC address>]
[mtu <MTU>]
[transport-mode datagram | connected]
[parent <ifname>]
[p-key <IPoIB P_Key>]

bluetooth: [addr <bluetooth address>]
[bt-type panu|nap|dun-gsm|dun-cdma]

vlan: dev <parent device (connection UUID, ifname, or MAC)>
id <VLAN ID>
[flags <VLAN flags>]
[ingress <ingress priority mapping>]
[egress <egress priority mapping>]
[mtu <MTU>]

bond: [mode balance-rr (0) | active-backup (1) | balance-xor (2) | broadcast (3) |
802.3ad (4) | balance-tlb (5) | balance-alb (6)]
[primary <ifname>]
[miimon <num>]
[downdelay <num>]
[updelay <num>]
[arp-interval <num>]
[arp-ip-target <num>]
[lacp-rate slow (0) | fast (1)]

bond-slave: master <master (ifname, or connection UUID or name)>

team: [config <file>|<raw JSON data>]

team-slave: master <master (ifname, or connection UUID or name)>
[config <file>|<raw JSON data>]

bridge: [stp yes|no]
[priority <num>]
[forward-delay <2-30>]
[hello-time <1-10>]
[max-age <6-40>]
[ageing-time <0-1000000>]
[multicast-snooping yes|no]
[mac <MAC address>]

bridge-slave: master <master (ifname, or connection UUID or name)>
[priority <0-63>]
[path-cost <1-65535>]
[hairpin yes|no]

vpn: vpn-type vpnc|openvpn|pptp|openconnect|openswan|libreswan|ssh|l2tp|iodine|...
[user <username>]

olpc-mesh: ssid <SSID>
[channel <1-13>]
[dhcp-anycast <MAC address>]

adsl: username <username>
protocol pppoa|pppoe|ipoatm
[password <password>]
[encapsulation vcmux|llc]

tun: mode tun|tap
[owner <UID>]
[group <GID>]
[pi yes|no]
[vnet-hdr yes|no]
[multi-queue yes|no]

ip-tunnel: mode ipip|gre|sit|isatap|vti|ip6ip6|ipip6|ip6gre|vti6
remote <remote endpoint IP>
[local <local endpoint IP>]
[dev <parent device (ifname or connection UUID)>]

macsec: dev <parent device (connection UUID, ifname, or MAC)>
mode <psk|eap>
[cak <key> ckn <key>]
[encrypt yes|no]
[port 1-65534]


macvlan: dev <parent device (connection UUID, ifname, or MAC)>
mode vepa|bridge|private|passthru|source
[tap yes|no]

vxlan: id <VXLAN ID>
[remote <IP of multicast group or remote address>]
[local <source IP>]
[dev <parent device (ifname or connection UUID)>]
[source-port-min <0-65535>]
[source-port-max <0-65535>]
[destination-port <0-65535>]

wpan: [short-addr <0x0000-0xffff>]
[pan-id <0x0000-0xffff>]
[page <default|0-31>]
[channel <default|0-26>]
[mac <MAC address>]

6lowpan: dev <parent device (connection UUID, ifname, or MAC)>
dummy:

SLAVE_OPTIONS:
bridge: [priority <0-63>]
[path-cost <1-65535>]
[hairpin yes|no]

team: [config <file>|<raw JSON data>]

IP_OPTIONS:
[ip4 <IPv4 address>] [gw4 <IPv4 gateway>]
[ip6 <IPv6 address>] [gw6 <IPv6 gateway>]

50.

Usage: nmcli connection modify { ARGUMENTS | help }

ARGUMENTS := [id | uuid | path] <ID> ([+|-]<setting>.<property> <value>)+

Modify one or more properties of the connection profile.
The profile is identified by its name, UUID or D-Bus path. For multi-valued
properties you can use optional '+' or '-' prefix to the property name.
The '+' sign allows appending items instead of overwriting the whole value.
The '-' sign allows removing selected items instead of the whole value.

ARGUMENTS := remove <setting>

Remove a setting from the connection profile.

Examples:
nmcli con mod home-wifi wifi.ssid rakosnicek
nmcli con mod em1-1 ipv4.method manual ipv4.addr "192.168.1.2/24, 10.10.1.5/8"
nmcli con mod em1-1 +ipv4.dns 8.8.4.4
nmcli con mod em1-1 -ipv4.dns 1
nmcli con mod em1-1 -ipv6.addr "abbe::cafe/56"
nmcli con mod bond0 +bond.options mii=500
nmcli con mod bond0 -bond.options downdelay
nmcli con mod em1-1 remove sriov

51.

Usage: nmcli connection clone { ARGUMENTS | help }

ARGUMENTS := [--temporary] [id | uuid | path] <ID> <new name>

Clone an existing connection profile. The newly created connection will be
the exact copy of the <ID>, except the uuid property (will be generated) and
id (provided as <new name> argument).

57.

Usage: nmcli connection import { ARGUMENTS | help }

ARGUMENTS := [--temporary] type <type> file <file to import>

Import an external/foreign configuration as a NetworkManager connection profile.
The type of the input file is specified by type option.
Only VPN configurations are supported at the moment. The configuration
is imported by NetworkManager VPN plugins.

58.

Usage: nmcli connection export { ARGUMENTS | help }

ARGUMENTS := [id | uuid | path] <ID> [<output file>]

Export a connection. Only VPN connections are supported at the moment.
The data are directed to standard output or to a file if a name is given.