Ubuntu
snapd package

Browsing Russian translation

  1. Groovy (20.10)
  2. Template “snappy”
  3. Russian (ru)
Don't show this notice anymore
Before translating, be sure to go through Ubuntu Translators instructions and Russian guidelines.

These translations are shared with snapd trunk series template snappy.

1 → 10 of 16 results First • Previous • • Last
28.

The fde-setup-request command is used inside the fde-setup hook. It will
return information about what operation for full-disk encryption is
requested and auxiliary data to complete this operation.

The fde-setup hook should do what is requested and then call
"snapctl fde-setup-result" and pass the result data to stdin.

Here is an example for how the fde-setup hook is called initially:
$ snapctl fde-setup-request
{"op":"features"}
$ echo '[]' | snapctl fde-setup-result

Alternatively the hook could reply with:
$ echo '{"error":"hardware-unsupported"}' | snapctl fde-setup-result

And then it is called again with a request to do the initial key setup:
$ snapctl fde-setup-request
{"op":"initial-setup", "key": "key-to-seal", "key-name":"key-for-ubuntu-data"}
$ echo "$sealed_key" | snapctl fde-setup-result
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
Located in overlord/hookstate/ctlcmd/fde_setup.go:36
29.

The fde-setup-result command sets the result data for a fde-setup hook
reading it from stdin.

For example:
When the fde-setup hook is called with "op":"features:
$ echo "[]" | snapctl fde-setup-result

When the fde-setup hook is called with "op":"initial-setup":
$ echo "sealed-key" | snapctl fde-setup-result
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
Located in overlord/hookstate/ctlcmd/fde_setup.go:101
33.

The get command prints configuration options for the current snap.

$ snapctl get username
frank

If multiple option names are provided, a document is returned:

$ snapctl get username password
{
"username": "frank",
"password": "..."
}

Nested values may be retrieved via a dotted path:

$ snapctl get author.name
frank

Values of interface connection settings may be printed with:

$ snapctl get :myplug usb-vendor
$ snapctl get :myslot path

This will return the named setting from the local interface endpoint, whether a plug
or a slot. Returning the setting from the connected snap's endpoint is also possible
by explicitly requesting that via the --plug and --slot command line options:

$ snapctl get :myplug --slot usb-vendor

This requests the "usb-vendor" setting from the slot that is connected to "myplug".
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
(no translation yet)
Located in overlord/hookstate/ctlcmd/get.go:52
37.

The install command installs the named snaps on the system.

To install multiple instances of the same snap, append an underscore and a
unique identifier (for each instance) to a snap's name.

With no further options, the snaps are installed tracking the stable channel,
with strict security confinement.

Revision choice via the --revision override requires the user to
have developer access to the snap, either directly or through the
store's collaboration feature, and to be logged in (see 'snap help login').

Note that a later refresh will typically undo a revision override, taking the snap
back to the current revision of the channel it's tracking.

Use --name to set the instance name when installing from snap file.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
Located in cmd/snap/cmd_snap_op.go:52
40.

The is-connected command returns success if the given plug or slot of the
calling snap is connected, and failure otherwise.

$ snapctl is-connected plug
$ echo $?
1

Snaps can only query their own plugs and slots - snap name is implicit and
implied by the snapctl execution context.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
Located in overlord/hookstate/ctlcmd/is_connected.go:40
44.

The login command authenticates the user to snapd and the snap store, and saves
credentials into the ~/.snap/auth.json file. Further communication with snapd
will then be made using those credentials.

It's not necessary to log in to interact with snapd. Doing so, however, enables
purchasing of snaps using 'snap buy', as well as some some developer-oriented
features as detailed in the help for the find, install and refresh commands.

An account can be set up at https://login.ubuntu.com
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
Located in cmd/snap/cmd_login.go:42
56.

The reboot command reboots the system into a particular mode of the selected
recovery system.

When called without a system label and without a mode it will just
trigger a regular reboot.

When called without a system label but with a mode it will use the
current system to enter the given mode.

Note that "recover" and "run" modes are only available for the
current system.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
Located in cmd/snap/cmd_reboot.go:42
77.

The set-health command is called from within a snap to inform the system of the
snap's overall health.

It can be called from any hook, and even from the apps themselves. A snap can
optionally provide a 'check-health' hook to better manage these calls, which is
then called periodically and with increased frequency while the snap is
"unhealthy". Any health regression will issue a warning to the user.

Note: the health is of the snap only, not of the apps it contains; it’s up to
the snap developer to determine how the health of the individual apps is
reflected in the overall health of the snap.

status can be one of:

- okay: the snap is healthy. This status takes no message and no code.

- waiting: a resource needed by the snap (e.g. a device, network, or service) is
not ready and the user will need to wait. The message must explain what
resource is being waited for.

- blocked: something needs doing to unblock the snap (e.g. a service needs to be
configured); the message must be sufficient to point the user in the right
direction.

- error: something is broken; the message must explain what.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
(no translation yet)
Located in overlord/hookstate/ctlcmd/health.go:35
89.

The unset command removes the provided configuration options as requested.

[tab]$ snap unset snap-name name address

All configuration changes are persisted at once, and only after the
snap's configuration hook returns successfully.

Nested values may be removed via a dotted path:

[tab]$ snap unset snap-name user.name
[tab] represents a tab character. Please write it exactly the same way, [tab], in your translation.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
Located in cmd/snap/cmd_unset.go:29
160.
<validation-set>
 
TRANSLATORS: This needs to begin with < and end with >
(no translation yet)
Located in cmd/snap/cmd_validate.go:70
1 → 10 of 16 results First • Previous • • Last

This translation is managed by Russian Ubuntu Translators, assigned by Ubuntu Translators.

You are not logged in. Please log in to work on translations.

Contributors to this translation: Airat Halitov, Aleksey Kabanov, Alexey Fedorov, Andrii Prokopenko, Anton, Arif Gasanov, Artem Sierikov, Dmitry Sharshakov, Dmytro Buhaiets, Eugene Roskin, Igor Zubarev, Maksim Maksimchuk, Maxim Miroevsky, Milachew, Roman, kostyarin, mwp, niko bazylev, something, vladislav, vofka, Антон Дерлюк, Артем Тутов.