Browsing Chinese (Simplified) translation

41.

Usage: nmcli connection up { ARGUMENTS | help }

ARGUMENTS := [id | uuid | path] <ID> [ifname <ifname>] [ap <BSSID>] [nsp <name>] [passwd-file <file with passwords>]

Activate a connection on a device. The profile to activate is identified by its
name, UUID or D-Bus path.

ARGUMENTS := ifname <ifname> [ap <BSSID>] [nsp <name>] [passwd-file <file with passwords>]

Activate a device with a connection. The connection profile is selected
automatically by NetworkManager.

ifname - specifies the device to active the connection on
ap - specifies AP to connect to (only valid for Wi-Fi)
nsp - specifies NSP to connect to (only valid for WiMAX)
passwd-file - file with password(s) required to activate the connection

42.

Usage: nmcli connection down { ARGUMENTS | help }

ARGUMENTS := [id | uuid | path | apath] <ID> ...

Deactivate a connection from a device (without preventing the device from
further auto-activation). The profile to deactivate is identified by its name,
UUID or D-Bus path.

43.

Usage: nmcli connection add { ARGUMENTS | help }

ARGUMENTS := COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS SLAVE_OPTIONS IP_OPTIONS [-- ([+|-]<setting>.<property> <value>)+]

COMMON_OPTIONS:
type <type>
ifname <interface name> | "*"
[con-name <connection name>]
[autoconnect yes|no]
[save yes|no]
[master <master (ifname, or connection UUID or name)>]
[slave-type <master connection type>]

TYPE_SPECIFIC_OPTIONS:
ethernet: [mac <MAC address>]
[cloned-mac <cloned MAC address>]
[mtu <MTU>]

wifi: ssid <SSID>
[mac <MAC address>]
[cloned-mac <cloned MAC address>]
[mtu <MTU>]
[mode infrastructure|ap|adhoc]

wimax: [mac <MAC address>]
[nsp <NSP>]

pppoe: username <PPPoE username>
[password <PPPoE password>]
[service <PPPoE service name>]
[mtu <MTU>]
[mac <MAC address>]

gsm: apn <APN>
[user <username>]
[password <password>]

cdma: [user <username>]
[password <password>]

infiniband: [mac <MAC address>]
[mtu <MTU>]
[transport-mode datagram | connected]
[parent <ifname>]
[p-key <IPoIB P_Key>]

bluetooth: [addr <bluetooth address>]
[bt-type panu|nap|dun-gsm|dun-cdma]

vlan: dev <parent device (connection UUID, ifname, or MAC)>
id <VLAN ID>
[flags <VLAN flags>]
[ingress <ingress priority mapping>]
[egress <egress priority mapping>]
[mtu <MTU>]

bond: [mode balance-rr (0) | active-backup (1) | balance-xor (2) | broadcast (3) |
802.3ad (4) | balance-tlb (5) | balance-alb (6)]
[primary <ifname>]
[miimon <num>]
[downdelay <num>]
[updelay <num>]
[arp-interval <num>]
[arp-ip-target <num>]
[lacp-rate slow (0) | fast (1)]

bond-slave: master <master (ifname, or connection UUID or name)>

team: [config <file>|<raw JSON data>]

team-slave: master <master (ifname, or connection UUID or name)>
[config <file>|<raw JSON data>]

bridge: [stp yes|no]
[priority <num>]
[forward-delay <2-30>]
[hello-time <1-10>]
[max-age <6-40>]
[ageing-time <0-1000000>]
[multicast-snooping yes|no]
[mac <MAC address>]

bridge-slave: master <master (ifname, or connection UUID or name)>
[priority <0-63>]
[path-cost <1-65535>]
[hairpin yes|no]

vpn: vpn-type vpnc|openvpn|pptp|openconnect|openswan|libreswan|ssh|l2tp|iodine|...
[user <username>]

olpc-mesh: ssid <SSID>
[channel <1-13>]
[dhcp-anycast <MAC address>]

adsl: username <username>
protocol pppoa|pppoe|ipoatm
[password <password>]
[encapsulation vcmux|llc]

tun: mode tun|tap
[owner <UID>]
[group <GID>]
[pi yes|no]
[vnet-hdr yes|no]
[multi-queue yes|no]

ip-tunnel: mode ipip|gre|sit|isatap|vti|ip6ip6|ipip6|ip6gre|vti6
remote <remote endpoint IP>
[local <local endpoint IP>]
[dev <parent device (ifname or connection UUID)>]

macsec: dev <parent device (connection UUID, ifname, or MAC)>
mode <psk|eap>
[cak <key> ckn <key>]
[encrypt yes|no]
[port 1-65534]


macvlan: dev <parent device (connection UUID, ifname, or MAC)>
mode vepa|bridge|private|passthru|source
[tap yes|no]

vxlan: id <VXLAN ID>
remote <IP of multicast group or remote address>
[local <source IP>]
[dev <parent device (ifname or connection UUID)>]
[source-port-min <0-65535>]
[source-port-max <0-65535>]
[destination-port <0-65535>]

dummy:

SLAVE_OPTIONS:
bridge: [priority <0-63>]
[path-cost <1-65535>]
[hairpin yes|no]

team: [config <file>|<raw JSON data>]

IP_OPTIONS:
[ip4 <IPv4 address>] [gw4 <IPv4 gateway>]
[ip6 <IPv6 address>] [gw6 <IPv6 gateway>]

44.

Usage: nmcli connection modify { ARGUMENTS | help }

ARGUMENTS := [id | uuid | path] <ID> ([+|-]<setting>.<property> <value>)+

Modify one or more properties of the connection profile.
The profile is identified by its name, UUID or D-Bus path. For multi-valued
properties you can use optional '+' or '-' prefix to the property name.
The '+' sign allows appending items instead of overwriting the whole value.
The '-' sign allows removing selected items instead of the whole value.

Examples:
nmcli con mod home-wifi wifi.ssid rakosnicek
nmcli con mod em1-1 ipv4.method manual ipv4.addr "192.168.1.2/24, 10.10.1.5/8"
nmcli con mod em1-1 +ipv4.dns 8.8.4.4
nmcli con mod em1-1 -ipv4.dns 1
nmcli con mod em1-1 -ipv6.addr "abbe::cafe/56"
nmcli con mod bond0 +bond.options mii=500
nmcli con mod bond0 -bond.options downdelay

45.

Usage: nmcli connection clone { ARGUMENTS | help }

ARGUMENTS := [--temporary] [id | uuid | path] <ID> <new name>

Clone an existing connection profile. The newly created connection will be
the exact copy of the <ID>, except the uuid property (will be generated) and
id (provided as <new name> argument).

46.

Usage: nmcli connection edit { ARGUMENTS | help }

ARGUMENTS := [id | uuid | path] <ID>

Edit an existing connection profile in an interactive editor.
The profile is identified by its name, UUID or D-Bus path

ARGUMENTS := [type <new connection type>] [con-name <new connection name>]

Add a new connection profile in an interactive editor.

47.

Usage: nmcli connection delete { ARGUMENTS | help }

ARGUMENTS := [id | uuid | path] <ID>

Delete a connection profile.
The profile is identified by its name, UUID or D-Bus path.

48.

Usage: nmcli connection monitor { ARGUMENTS | help }

ARGUMENTS := [id | uuid | path] <ID> ...

Monitor connection profile activity.
This command prints a line whenever the specified connection changes.
Monitors all connection profiles in case none is specified.

49.

Usage: nmcli connection reload { help }

Reload all connection files from disk.

50.

Usage: nmcli connection load { ARGUMENTS | help }

ARGUMENTS := <filename> [<filename>...]

Load/reload one or more connection files from disk. Use this after manually
editing a connection file to ensure that NetworkManager is aware of its latest
state.