Browsing Slovak translation

43.

Usage: nmcli connection add { ARGUMENTS | help }

ARGUMENTS := COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS SLAVE_OPTIONS IP_OPTIONS [-- ([+|-]<setting>.<property> <value>)+]

COMMON_OPTIONS:
type <type>
ifname <interface name> | "*"
[con-name <connection name>]
[autoconnect yes|no]
[save yes|no]
[master <master (ifname, or connection UUID or name)>]
[slave-type <master connection type>]

TYPE_SPECIFIC_OPTIONS:
ethernet: [mac <MAC address>]
[cloned-mac <cloned MAC address>]
[mtu <MTU>]

wifi: ssid <SSID>
[mac <MAC address>]
[cloned-mac <cloned MAC address>]
[mtu <MTU>]
[mode infrastructure|ap|adhoc]

wimax: [mac <MAC address>]
[nsp <NSP>]

pppoe: username <PPPoE username>
[password <PPPoE password>]
[service <PPPoE service name>]
[mtu <MTU>]
[mac <MAC address>]

gsm: apn <APN>
[user <username>]
[password <password>]

cdma: [user <username>]
[password <password>]

infiniband: [mac <MAC address>]
[mtu <MTU>]
[transport-mode datagram | connected]
[parent <ifname>]
[p-key <IPoIB P_Key>]

bluetooth: [addr <bluetooth address>]
[bt-type panu|nap|dun-gsm|dun-cdma]

vlan: dev <parent device (connection UUID, ifname, or MAC)>
id <VLAN ID>
[flags <VLAN flags>]
[ingress <ingress priority mapping>]
[egress <egress priority mapping>]
[mtu <MTU>]

bond: [mode balance-rr (0) | active-backup (1) | balance-xor (2) | broadcast (3) |
802.3ad (4) | balance-tlb (5) | balance-alb (6)]
[primary <ifname>]
[miimon <num>]
[downdelay <num>]
[updelay <num>]
[arp-interval <num>]
[arp-ip-target <num>]
[lacp-rate slow (0) | fast (1)]

bond-slave: master <master (ifname, or connection UUID or name)>

team: [config <file>|<raw JSON data>]

team-slave: master <master (ifname, or connection UUID or name)>
[config <file>|<raw JSON data>]

bridge: [stp yes|no]
[priority <num>]
[forward-delay <2-30>]
[hello-time <1-10>]
[max-age <6-40>]
[ageing-time <0-1000000>]
[multicast-snooping yes|no]
[mac <MAC address>]

bridge-slave: master <master (ifname, or connection UUID or name)>
[priority <0-63>]
[path-cost <1-65535>]
[hairpin yes|no]

vpn: vpn-type vpnc|openvpn|pptp|openconnect|openswan|libreswan|ssh|l2tp|iodine|...
[user <username>]

olpc-mesh: ssid <SSID>
[channel <1-13>]
[dhcp-anycast <MAC address>]

adsl: username <username>
protocol pppoa|pppoe|ipoatm
[password <password>]
[encapsulation vcmux|llc]

tun: mode tun|tap
[owner <UID>]
[group <GID>]
[pi yes|no]
[vnet-hdr yes|no]
[multi-queue yes|no]

ip-tunnel: mode ipip|gre|sit|isatap|vti|ip6ip6|ipip6|ip6gre|vti6
remote <remote endpoint IP>
[local <local endpoint IP>]
[dev <parent device (ifname or connection UUID)>]

macsec: dev <parent device (connection UUID, ifname, or MAC)>
mode <psk|eap>
[cak <key> ckn <key>]
[encrypt yes|no]
[port 1-65534]


macvlan: dev <parent device (connection UUID, ifname, or MAC)>
mode vepa|bridge|private|passthru|source
[tap yes|no]

vxlan: id <VXLAN ID>
remote <IP of multicast group or remote address>
[local <source IP>]
[dev <parent device (ifname or connection UUID)>]
[source-port-min <0-65535>]
[source-port-max <0-65535>]
[destination-port <0-65535>]

dummy:

SLAVE_OPTIONS:
bridge: [priority <0-63>]
[path-cost <1-65535>]
[hairpin yes|no]

team: [config <file>|<raw JSON data>]

IP_OPTIONS:
[ip4 <IPv4 address>] [gw4 <IPv4 gateway>]
[ip6 <IPv6 address>] [gw6 <IPv6 gateway>]

44.

Usage: nmcli connection modify { ARGUMENTS | help }

ARGUMENTS := [id | uuid | path] <ID> ([+|-]<setting>.<property> <value>)+

Modify one or more properties of the connection profile.
The profile is identified by its name, UUID or D-Bus path. For multi-valued
properties you can use optional '+' or '-' prefix to the property name.
The '+' sign allows appending items instead of overwriting the whole value.
The '-' sign allows removing selected items instead of the whole value.

Examples:
nmcli con mod home-wifi wifi.ssid rakosnicek
nmcli con mod em1-1 ipv4.method manual ipv4.addr "192.168.1.2/24, 10.10.1.5/8"
nmcli con mod em1-1 +ipv4.dns 8.8.4.4
nmcli con mod em1-1 -ipv4.dns 1
nmcli con mod em1-1 -ipv6.addr "abbe::cafe/56"
nmcli con mod bond0 +bond.options mii=500
nmcli con mod bond0 -bond.options downdelay

45.

Usage: nmcli connection clone { ARGUMENTS | help }

ARGUMENTS := [--temporary] [id | uuid | path] <ID> <new name>

Clone an existing connection profile. The newly created connection will be
the exact copy of the <ID>, except the uuid property (will be generated) and
id (provided as <new name> argument).

46.

Usage: nmcli connection edit { ARGUMENTS | help }

ARGUMENTS := [id | uuid | path] <ID>

Edit an existing connection profile in an interactive editor.
The profile is identified by its name, UUID or D-Bus path

ARGUMENTS := [type <new connection type>] [con-name <new connection name>]

Add a new connection profile in an interactive editor.

47.

Usage: nmcli connection delete { ARGUMENTS | help }

ARGUMENTS := [id | uuid | path] <ID>

Delete a connection profile.
The profile is identified by its name, UUID or D-Bus path.

48.

Usage: nmcli connection monitor { ARGUMENTS | help }

ARGUMENTS := [id | uuid | path] <ID> ...

Monitor connection profile activity.
This command prints a line whenever the specified connection changes.
Monitors all connection profiles in case none is specified.

49.

Usage: nmcli connection reload { help }

Reload all connection files from disk.

50.

Usage: nmcli connection load { ARGUMENTS | help }

ARGUMENTS := <filename> [<filename>...]

Load/reload one or more connection files from disk. Use this after manually
editing a connection file to ensure that NetworkManager is aware of its latest
state.

51.

Usage: nmcli connection import { ARGUMENTS | help }

ARGUMENTS := [--temporary] type <type> file <file to import>

Import an external/foreign configuration as a NetworkManager connection profile.
The type of the input file is specified by type option.
Only VPN configurations are supported at the moment. The configuration
is imported by NetworkManager VPN plugins.

52.

Usage: nmcli connection export { ARGUMENTS | help }

ARGUMENTS := [id | uuid | path] <ID> [<output file>]

Export a connection. Only VPN connections are supported at the moment.
The data are directed to standard output or to a file if a name is given.