|
16.
|
|
|
PURPOSE:
This test will check that headphones connector works correctly
STEPS:
1. Connect a pair of headphones to your audio device
2. Click the Test button to play a sound to your audio device
VERIFICATION:
Did you hear a sound through the headphones and did the sound play without any distortion, clicks or other strange noises from your headphones?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
CEL:
Sprawdzenie, czy działa prawidłowo wtyczka słuchawek.
POSTĘPOWANIE:
1. Podłączyć słuchawki do urządzenia dźwiękowego.
2. Kliknąć przycisk „Przetestuj”, aby odtworzyć dźwięk przy użyciu urządzenia dźwiękowego.
WERYFIKACJA:
Czy w słuchawkach można było usłyszeć dźwięk, wolny od trzasków, szumów i innych zakłóceń?
|
|
Translated by
Piotr Sokół
|
|
|
|
Located in
../jobs/audio.txt.in:78
|
|
17.
|
|
|
PURPOSE:
This test will check that recording sound using the onboard microphone works correctly
STEPS:
1. Disconnect any external microphones that you have plugged in
2. Click "Test", then speak into your internal microphone
3. After a few seconds, your speech will be played back to you.
VERIFICATION:
Did you hear your speech played back?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
CEL:
Sprawdzenie, czy działa prawidłowo nagrywanie dźwięku przy użyciu wbudowanego mikrofonu.
POSTĘPOWANIE:
1. Odłączyć wszystkie zewnętrzne mikrofony.
2. Kliknąć przycisk „Przetestuj”, aby przechwycić dźwięk przy użyciu wbudowanego mikrofonu.
3. Po chwili zarejestrowany dźwięk zostanie odtworzony.
WERYFIKACJA:
Czy można było usłyszeć zarejestrowany dźwięk?
|
|
Translated by
Piotr Sokół
|
|
|
|
Located in
../jobs/audio.txt.in:97
|
|
18.
|
|
|
PURPOSE:
This test will check that recording sound using an external microphone works correctly
STEPS:
1. Connect a microphone to your microphone port
2. Click "Test", then speak into the external microphone
3. After a few seconds, your speech will be played back to you
VERIFICATION:
Did you hear your speech played back?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
CEL:
Sprawdzenie, czy działa prawidłowo nagrywanie dźwięku przy użyciu zewnętrznego mikrofonu.
POSTĘPOWANIE:
1. Podłączyć mikrofon do urządzenia dźwiękowego.
2. Kliknąć przycisk „Przetestuj”, aby przechwycić dźwięk przy użyciu zewnętrznego mikrofonu.
3. Po chwili zarejestrowany dźwięk zostanie odtworzony.
WERYFIKACJA:
Czy można było usłyszeć zarejestrowany dźwięk?
|
|
Translated by
Piotr Sokół
|
|
|
|
Located in
../jobs/audio.txt.in:117
|
|
19.
|
|
|
PURPOSE:
This test will check that a USB audio device works correctly
STEPS:
1. Connect a USB audio device to your system
2. Click "Test", then speak into the microphone
3. After a few seconds, your speech will be played back to you
VERIFICATION:
Did you hear your speech played back through the USB headphones?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
CEL:
Ten test sprawdzi, czy urządzenie audio USB działa prawidłowo
KROKI:
1. Podłącz urządzenie audio USB do twojego systemu
2. Kliknij "Test", następnie mów do mikrofonu
3. Po kilku sekundach, twoje słowa zostaną tobie powtórzone
WERYFIKACJA:
Czy usłyszałeś wypowiedziane przez ciebie słowa powtórzone przez słuchawki USB?
|
|
Translated by
Krzysiek Karolak
|
|
Reviewed by
Zygmunt Krynicki
|
|
|
|
Located in
../jobs/audio.txt.in:135
|
|
20.
|
|
|
Play back a sound on the default output and listen for it on the default input.
|
|
|
description
|
|
|
|
Odtwarzaj dźwięk w domyślnym wyjściu i nasłuchuj go na domyślnym wejściu.
|
|
Translated and reviewed by
Piotr Strębski
|
|
|
|
Located in
../jobs/audio.txt.in:149
|
|
21.
|
|
|
Collect audio-related system information. This data can be used to simulate this computer's audio subsystem and perform more detailed tests under a controlled environment.
|
|
|
description
|
|
|
|
Zbierz informacje systemowe związane z audio. Te dane będą użyte do symulacji podsystemu audio tego komputera i wykonania bardziej szczegółowych testów pod kontrolowanym środowiskiem.
|
|
Translated by
Krzysiek Karolak
|
|
Reviewed by
Zygmunt Krynicki
|
|
|
|
Located in
../jobs/audio.txt.in:165
|
|
22.
|
|
|
Attaches the audio hardware data collection log to the results.
|
|
|
description
|
|
|
|
Dołącza kolekcję danych o sprzęcie audio i dziennik z wynikami.
|
|
Translated by
Krzysiek Karolak
|
|
Reviewed by
Zygmunt Krynicki
|
|
|
|
Located in
../jobs/audio.txt.in:175
|
|
23.
|
|
|
PURPOSE:
Check that the various audio channels are working properly
STEPS:
1. Click the Test button
VERIFICATION:
You should clearly hear a voice from the different audio channels
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
CEL:
Sprawdź, czy wszystkie kanały audio działają poprawnie
KROKI:
1. Kliknij przycisk Test
WERYFIKACJA:
Powinieneś wyraźnie słyszeć głos wydobywający się z różnych kanałów audio
|
|
Translated by
Krzysiek Karolak
|
|
Reviewed by
Zygmunt Krynicki
|
|
|
|
Located in
../jobs/audio.txt.in:182
|
|
24.
|
|
|
This test will verify that the volume levels are at an acceptable level on your local system. The test will validate that the volume is greater than or equal to minvol and less than or equal to maxvol for all sources (inputs) and sinks (outputs) recognized by PulseAudio. It will also validate that the active source and sink are not muted. You should not manually adjust the volume or mute before running this test.
|
|
|
description
|
|
|
|
Ten test zweryfikuje, czy poziom głośności jest akceptowalny w Twoim lokalnym systemie. Test potwierdzi, czy poziom głośności jest wyższy lub równy minimalnej głośności i mniejszy lub równy maksymalnej głośności dla wszystkich źródeł (wejść) i wyjść uznawanych przez PulseAudio. Sprawdzi także, czy aktywne źródła i wyjścia nie są wyciszone. Nie powinieneś ręcznie zmieniać głośności lub wyciszać jej przed uruchomieniem tego testu.
|
|
Translated and reviewed by
Piotr Strębski
|
|
|
|
Located in
../jobs/audio.txt.in:185
|
|
25.
|
|
|
PURPOSE:
Check that external line out connection works correctly
STEPS:
1. Insert cable to speakers (with built-in amplifiers) on the line out port
2. Open system sound preferences, 'Output' tab, select 'Line-out' on the connector list. Click the Test button
3. On the system sound preferences, select 'Internal Audio' on the device list and click 'Test Speakers' to check left and right channel
VERIFICATION:
1. Do you hear a sound in the speakers? The internal speakers should *not* be muted automatically
2. Do you hear the sound coming out on the corresponding channel?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/audio.txt.in:208
|