Browsing Polish translation

Don't show this notice anymore
Before translating, be sure to go through Launchpad Translators instructions.
110 of 1558 results
10.
Root Bind DN
(no translation yet)
11.
Root Bind Password
(no translation yet)
79.
testparm
(no translation yet)
87.
Result of testjoin
(no translation yet)
88.
Winbindd Availability
(no translation yet)
172.
Last test result as microseconds to discharge cap, saturated at its maximum value. Also logs minutes since last test and lifetime number of tests. Raw value contains the following data: Bytes 0-1: Last test result as microseconds to discharge cap, saturates at max value. Test result expected in range 25 <= result <= 5000000, lower indicates specific error code. Bytes 2-3: Minutes since last test, saturates at max value. Bytes 4-5: Lifetime number of tests, not incremented on power cycle, saturates at max value. Normalized value is set to one on test failure or 11 if the capacitor has been tested in an excessive temperature condition, otherwise 100.
(no translation yet)
174.
Delta between most-worn and least-worn Flash blocks. It describes how good/bad the wearleveling of the SSD works on a more technical way.
(no translation yet)
179.
This attribute is a part of Hewlett-Packard's SMART IV technology, as well as part of other vendors' IO Error Detection and Correction schemas, and it contains a count of parity errors which occur in the data path to the media via the drive's cache RAM.
(no translation yet)
182.
The count of aborted operations due to HDD timeout. Normally this attribute value should be equal to zero and if the value is far above zero, then most likely there will be some serious problems with power supply or an oxidized data cable.
(no translation yet)
183.
HDD producers implement a Fly Height Monitor that attempts to provide additional protections for write operations by detecting when a recording head is flying outside its normal operating range. If an unsafe fly height condition is encountered, the write process is stopped, and the information is rewritten or reallocated to a safe region of the hard drive. This attribute indicates the count of these errors detected over the lifetime of the drive. This feature is implemented in most modern Seagate drives.
(no translation yet)
110 of 1558 results

This translation is managed by translation group launchpad-translators.

You are not logged in. Please log in to work on translations.

Contributors to this translation: Mar Son, Michał Fita, Piotr Łobuz, Piotr Łobuz, Tomasz Swidzinski, iwona20031, zoon01.