|
29.
|
|
|
%u minutes
|
|
|
|
(no translation yet)
|
|
|
|
30.
|
|
|
%u second
|
|
|
|
(no translation yet)
|
|
|
|
31.
|
|
|
%u seconds
|
|
|
|
(no translation yet)
|
|
|
|
32.
|
|
|
'%s' deletes all statistical data from the graphs!
|
|
|
|
(no translation yet)
|
|
|
|
33.
|
|
|
(Default lengths are: 128 for AES, 128 for Blowfish, 128 for Camellia and 192 for 3DES).
|
|
|
|
(no translation yet)
|
|
|
|
34.
|
|
|
(Found in a Maxtor 6B200M0 200GB and Maxtor 2R015H1 15GB disks).
|
|
|
|
(no translation yet)
|
|
|
|
35.
|
|
|
(Kingston)Counts the number of flash erase failures. This Attribute returns the total number of Flash erase operation failures since the drive was deployed. This Attribute is identical to Attribute 182.
|
|
|
|
(no translation yet)
|
|
|
|
36.
|
|
|
(Kingston)Counts the number of flash program failures. This Attribute returns the total number of Flash program operation failures since the drive was deployed. This attribute is identical to attribute 181.
|
|
|
|
(no translation yet)
|
|
|
|
37.
|
|
|
(Vendor specific raw value.) Rate of seek errors of the magnetic heads. If there is a partial failure in the mechanical positioning system, then seek errors will arise. Such a failure may be due to numerous factors, such as damage to a servo, or thermal widening of the hard disk. The raw value has different structure for different vendors and is often not meaningful as a decimal number.
|
|
|
|
(no translation yet)
|
|
|
|
38.
|
|
|
(Vendor specific raw value.) Stores data related to the rate of hardware read errors that occurred when reading data from a disk surface. The raw value has different structure for different vendors and is often not meaningful as a decimal number.
|
|
|
|
(no translation yet)
|
|
|