Translations by OKANO Takayoshi
OKANO Takayoshi has submitted the following strings to this translation. Contributions are visually coded: currently used translations, unreviewed suggestions, rejected suggestions.
1 → 9 of 9 results | First • Previous • Next • Last |
5. |
Unable to watch configuration directory
|
|
2012-12-24 |
設定ディレクトリを監視できません
|
|
309. |
force reboot or halt, don't call shutdown(8)
|
|
2013-02-24 |
shutdown(8) を呼び出さずに、リブートもしくは停止を強制実行します
|
|
325. |
The system /var/run/utmp file is used unless the alternate file UTMP is given.
|
|
2012-12-08 |
代替ファイルとして UTMP を指定しない場合、システムの /var/run/utmp ファイルが使われます。
|
|
2012-12-07 | ||
2012-12-01 |
別のファイルとして UTMP を指定しない場合は、システムの /var/run/utmp ファイルを使います。
|
|
334. |
TIME may have different formats, the most common is simply the word 'now' which will bring the system down immediately. Other valid formats are +m, where m is the number of minutes to wait until shutting down and hh:mm which specifies the time on the 24hr clock.
Logged in users are warned by a message sent to their terminal, you may include an optional MESSAGE included with this. Messages can be sent without actually bringing the system down by using the -k option.
If TIME is given, the command will remain in the foreground until the shutdown occurs. It can be cancelled by Control-C, or by another user using the -c option.
The system is brought down into maintenance (single-user) mode by default, you can change this with either the -r or -h option which specify a reboot or system halt respectively. The -h option can be further modified with -H or -P to specify whether to halt the system, or to power it off afterwards. The default is left up to the shutdown scripts.
|
|
2012-12-01 |
TIME にはさまざまなフォーマットが使え、もっとも一般的なのは、システムを直ちに終了させる 'now' という単語です。 他の有効なフォーマットとしては、シャットダウンまでの分を指定する +m や 24時間制で時刻を指定する hh:mm があります。
ログイン中のユーザーの端末には警告メッセージが表示され、これには任意の MESSAGE を含めることもできます。-k オプションを使用すると、実際にシステムを落とすことなくメッセージを送れます。
TIME を指定した場合、コマンドはシャットダウンが起動されるまでフォアグランドに残ります。Control+C もしくは -c オプションを付ければ他のユーザーでもキャンセルが可能です。
デフォルトでは、システムはメンテナンス (シングルユーザー) モードに落ちますが、-r もしくは -h オプションで再起動もしくはシステム停止を指定できます。-h オプションに -H か -P を付ければさらに変更が可能で、システム停止するか電源を切るか指定できます。デフォルトの動作についてはシャットダウンスクリプトの内容次第です。
|
|
2011-08-26 |
TIME にはさまざまなフォーマットが使え、もっとも一般的なのは、システムを直ちに落す 'now' という単語です。 その他有効なフォーマットにはシャットダウンまでの分数を指定する +m や 24時間制で時刻を指定する hh:mm があります。
ログイン中のユーザは端末はメッセージで警告されます、任意の MESSAGE を追加できます。-k オプションで、実際にはシステムを落さずにメッセージを送れます。
TIME が与えられた場合コマンドはシャットダウンが起動されるまでフォアグランドに残ります。コントロール+C もしくは -c オプションを付ければ他ユーザでもキャンセル可能です。
デフォルトでは、システムはメンテナンス (シングル・ユーザ) モードに落ちますが、-r もしくは -h オプションでリブートもしくはシステムホルトを指定できます。-h オブションは -H か -P で更に変更でき、システムをホルトするか電源を切るかを指定できます。ディフォルト動作についてはシャットダウンスクリプトの内容次第です。
|
|
335. |
%s: time expected
|
|
2012-11-17 |
%s: 時間指定がありません
|
|
349. |
Unable to fork child-process to warn users: %s
|
|
2011-08-26 |
ユーザに警告するための子プロセスを生成できません: %s
|