|
26.
|
|
|
PURPOSE:
Check that external line in connection works correctly
STEPS:
1. Use a cable to connect the line in port to an external line out source.
2. Open system sound preferences, 'Input' tab, select 'Line-in' on the connector list. Click the Test button
3. After a few seconds, your recording will be played back to you.
VERIFICATION:
Did you hear your recording?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/audio.txt.in:228
|
|
27.
|
|
|
PURPOSE:
Check that balance control works correctly on internal speakers
STEPS:
1. Check that moving the balance slider from left to right works smoothly
2. Click the Test button to play an audio tone for 10 seconds.
3. Move the balance slider from left to right and back.
4. Check that actual speaker audio balance follows your setting.
VERIFICATION:
Does the slider move smoothly, as well as being followed by the setting by the actual audio output?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/audio.txt.in:289
|
|
28.
|
|
|
PURPOSE:
Check that balance control works correctly on external headphone
STEPS:
1. Check that moving the balance slider from left to right works smoothly
2. Click the Test button to play an audio tone for 10 seconds.
3. Move the balance slider from left to right and back.
4. Check that actual headphone audio balance follows your setting.
VERIFICATION:
Does the slider move smoothly, as well as being followed by the setting by the actual audio output?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/audio.txt.in:310
|
|
64.
|
|
|
Run GiMark, a geometry instancing test (OpenGL 3.3) Windowed 1024x640 no antialiasing
|
|
|
description
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/benchmarks.txt.in:274
|
|
65.
|
|
|
Run a tessellation test based on TessMark (OpenGL 4.0) Fullscreen 1920x1080 no antialiasing
|
|
|
description
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/benchmarks.txt.in:285
|
|
66.
|
|
|
Run a tessellation test based on TessMark (OpenGL 4.0) Windowed 1024x640 no antialiasing
|
|
|
description
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/benchmarks.txt.in:295
|
|
71.
|
|
|
PURPOSE:
This test will check that you can use a BlueTooth HID device
STEPS:
1. Enable either a BT mouse or keyboard
2. Click on the bluetooth icon in the menu bar
3. Select 'Setup new device'
4. Look for the device in the list and select it
5. For mice, perform actions such as moving the pointer, right and left button clicks and double clicks
6. For keyboards, click the Test button to lauch a small tool. Enter some text into the tool and close it.
VERIFICATION:
Did the device work as expected?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/bluetooth.txt.in:105
|
|
106.
|
|
|
PURPOSE:
This will verify that an ExpressCard slot can detect inserted devices.
STEPS:
Skip this test if you do not have an ExpressCard slot.
1. Plug an ExpressCard device into the ExpressCard slot
VERIFICATION:
Was the device correctly detected?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/expresscard.txt.in:3
|
|
107.
|
|
|
PURPOSE:
This test will verify that a fingerprint reader will work properly for logging into your system. This test case assumes that there's a testing account from which test cases are run and a personal account that the tester uses to verify the fingerprint reader
STEPS:
1. Click on the User indicator on the left side of the panel (your user name).
2. Select "Switch User Account"
3. On the LightDM screen select your username.
4. Use the fingerprint reader to login.
5. Click on the user switcher applet.
6. Select the testing account to continue running tests.
VERIFICATION:
Did the authentication procedure work correctly?
|
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/fingerprint.txt.in:3
|
|
123.
|
|
|
Collect info on fresh rate.
|
|
|
description
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/graphics.txt.in:119
|