Translations by Vibhav Pant

Vibhav Pant has submitted the following strings to this translation. Contributions are visually coded: currently used translations, unreviewed suggestions, rejected suggestions.

150 of 97 results
68.
PURPOSE: This test will check that bluetooth connection works correctly STEPS: 1. Enable bluetooth on any mobile device (PDA, smartphone, etc.) 2. Click on the bluetooth icon in the menu bar 3. Select 'Setup new device' 4. Look for the device in the list and select it 5. In the device write the PIN code automatically chosen by the wizard 6. The device should pair with the computer 7. Right-click on the bluetooth icon and select browse files 8. Authorize the computer to browse the files in the device if needed 9. You should be able to browse the files VERIFICATION: Did all the steps work?
2011-12-23
PURPOSE: This test will check that bluetooth connection works correctly STEPS: 1. Enable bluetooth on any mobile device (PDA, smartphone, etc.) 2. Click on the bluetooth icon in the menu bar 3. Select 'Setup new device' 4. Look for the device in the list and select it 5. In the device write the PIN code automatically chosen by the wizard 6. The device should pair with the computer 7. Right-click on the bluetooth icon and select browse files 8. Authorize the computer to browse the files in the device if needed 9. You should be able to browse the files VERIFICATION: Did all the steps work?
69.
PURPOSE: This test will check that you can transfer information through a bluetooth connection STEPS: 1. Make sure that you're able to browse the files in your mobile device 2. Copy a file from the computer to the mobile device 3. Copy a file from the mobile device to the computer VERIFICATION: Were all files copied correctly?
2011-12-23
PURPOSE: This test will check that you can transfer information through a bluetooth connection STEPS: 1. Make sure that you're able to browse the files in your mobile device 2. Copy a file from the computer to the mobile device 3. Copy a file from the mobile device to the computer VERIFICATION: Were all files copied correctly?
70.
PURPOSE: This test will check that you can record and hear audio using a bluetooth audio device STEPS: 1. Enable the bluetooth headset 2. Click on the bluetooth icon in the menu bar 3. Select 'Setup new device' 4. Look for the device in the list and select it 5. In the device write the PIN code automatically chosen by the wizard 6. The device should pair with the computer 7. Click "Test" to record for five seconds and reproduce in the bluetooth device VERIFICATION: Did you hear the sound you recorded in the bluetooth
2011-12-23
PURPOSE: This test will check that you can record and hear audio using a bluetooth audio device STEPS: 1. Enable the bluetooth headset 2. Click on the bluetooth icon in the menu bar 3. Select 'Setup new device' 4. Look for the device in the list and select it 5. In the device write the PIN code automatically chosen by the wizard 6. The device should pair with the computer 7. Click "Test" to record for five seconds and reproduce in the bluetooth device VERIFICATION: Did you hear the sound you recorded in the bluetooth
76.
PURPOSE: This test will verify your system's ability to play Ogg Vorbis audio files. STEPS: 1. Click Test to play an Ogg Vorbis file (.ogg) 2. Please close the player to proceed. VERIFICATION: Did the sample play correctly?
2011-12-23
PURPOSE: This test will verify your system's ability to play Ogg Vorbis audio files. STEPS: 1. Click Test to play an Ogg Vorbis file (.ogg) 2. Please close the player to proceed. VERIFICATION: Did the sample play correctly?
77.
PURPOSE: This test will verify your system's ability to play Wave Audio files. STEPS: 1. Select Test to play a Wave Audio format file (.wav) 2. Please close the player to proceed. VERIFICATION: Did the sample play correctly?
2011-12-23
PURPOSE: This test will verify your system's ability to play Wave Audio files. STEPS: 1. Select Test to play a Wave Audio format file (.wav) 2. Please close the player to proceed. VERIFICATION: Did the sample play correctly?
118.
PURPOSE: This test will verify the default display resolution STEPS: 1. This display is using the following resolution: INFO: $output VERIFICATION: Is this acceptable for your display?
2011-12-23
PURPOSE: This test will verify the default display resolution STEPS: 1. This display is using the following resolution: INFO: $output VERIFICATION: Is this acceptable for your display?
125.
PURPOSE: This test will test the default display STEPS: 1. Click "Test" to display a video test. VERIFICATION: Do you see color bars and static?
2011-12-23
PURPOSE: This test will test the default display STEPS: 1. Click "Test" to display a video test. VERIFICATION: Do you see colour bars and static?
127.
PURPOSE: This test cycles through the detected video modes STEPS: 1. Click "Test" to start cycling through the video modes VERIFICATION: Did the screen appear to be working for each mode?
2011-12-23
PURPOSE: This test cycles through the detected video modes STEPS: 1. Click "Test" to start cycling through the video modes VERIFICATION: Did the screen appear to be working for each mode?
131.
PURPOSE: This test tests the basic 3D capabilities of your video card STEPS: 1. Click "Test" to execute an OpenGL demo. Press ESC at any time to close. 2. Verify that the animation is not jerky or slow. VERIFICATION: 1. Did the 3d animation appear? 2. Was the animation free from slowness/jerkiness?
2011-12-23
PURPOSE: This test tests the basic 3D capabilities of your video card STEPS: 1. Click "Test" to execute an OpenGL demo. Press ESC at any time to close. 2. Verify that the animation is not jerky or slow. VERIFICATION: 1. Did the 3d animation appear? 2. Was the animation free from slowness/jerkiness?
140.
PURPOSE: This test will check to make sure your system can successfully hibernate (if supported) STEPS: 1. Click on Test 2. The system will hibernate and should wake itself within 5 minutes 3. If your system does not wake itself after 5 minutes, please press the power button to wake the system manually 4. If the system fails to resume from hibernate, please restart System Testing and mark this test as Failed VERIFICATION: Did the system successfully hibernate and did it work properly after waking up?
2011-12-23
PURPOSE: This test will check to make sure your system can successfully hibernate (if supported) STEPS: 1. Click on Test 2. The system will hibernate and should wake itself within 5 minutes 3. If your system does not wake itself after 5 minutes, please press the power button to wake the system manually 4. If the system fails to resume from hibernate, please restart System Testing and mark this test as Failed VERIFICATION: Did the system successfully hibernate and did it work properly after waking up?
142.
Attaches a report of installed codecs for Intel HDA
2011-12-23
Attaches a report of installed codecs for Intel HDA
143.
Attaches a report of CPU information
2011-12-23
Attaches a report of CPU information
144.
Attaches a copy of /var/log/dmesg to the test results
2011-12-23
Attaches a copy of /var/log/dmesg to the test results
145.
Attaches info on DMI
2011-12-23
Attaches info on DMI
146.
Attaches dmidecode output
2011-12-23
Attaches dmidecode output
149.
Attaches very verbose lspci output.
2011-12-23
Attaches very verbose lspci output.
152.
Attaches the contents of the various modprobe conf files.
2011-12-23
Attaches the contents of the various modprobe conf files.
153.
Attaches the contents of the /etc/modules file.
2011-12-23
Attaches the contents of the /etc/modules file.
154.
attaches the contents of various sysctl config files.
2011-12-23
attaches the contents of various sysctl config files.
155.
Attaches a report of sysfs attributes.
2011-12-23
Attaches a report of sysfs attributes.
156.
Attaches a dump of the udev database showing system hardware information.
2011-12-23
Attaches a dump of the udev database showing system hardware information.
158.
Attaches a tarball of gcov data if present.
2011-12-23
Attaches a tarball of gcov data if present.
159.
Attaches a list of the currently running kernel modules.
2011-12-23
Attaches a list of the currently running kernel modules.
160.
Attaches the contents of /proc/acpi/sleep if it exists.
2011-12-23
Attaches the contents of /proc/acpi/sleep if it exists.
163.
Attaches the bootchart png file for bootchart runs
2011-12-23
Attaches the bootchart png file for bootchart runs
164.
Attaches the bootchart log for bootchart test runs.
2011-12-23
Attaches the bootchart log for bootchart test runs.
165.
installs the installer bootchart tarball if it exists.
2011-12-23
installs the installer bootchart tarball if it exists.
166.
Attaches the installer debug log if it exists.
2011-12-23
Attaches the installer debug log if it exists.
173.
PURPOSE: This test will test your pointing device STEPS: 1. Move the cursor using the pointing device or touch the screen. 2. Perform some single/double/right click operations. VERIFICATION: Did the pointing device work as expected?
2011-12-23
PURPOSE: This test will test your pointing device STEPS: 1. Move the cursor using the pointing device or touch the screen. 2. Perform some single/double/right click operations. VERIFICATION: Did the pointing device work as expected?
174.
PURPOSE: This test will test your keyboard STEPS: 1. Click on Test 2. On the open text area, use your keyboard to type something VERIFICATION: Is your keyboard working properly?
2011-12-23
PURPOSE: This test will test your keyboard STEPS: 1. Click on Test 2. On the open text area, use your keyboard to type something VERIFICATION: Is your keyboard working properly?
177.
Tests to see that apt can access repositories and get updates (does not install updates). This is done to confirm that you could recover from an incomplete or broken update.
2011-12-23
Tests to see that apt can access repositories and get updates (does not install updates). This is done to confirm that you could recover from an incomplete or broken update.
179.
PURPOSE: This test will test the brightness key STEPS: 1. Press the brightness buttons on the keyboard VERIFICATION: Did the brightness change following to your key presses?
2011-12-23
PURPOSE: This test will test the brightness key STEPS: 1. Press the brightness buttons on the keyboard VERIFICATION: Did the brightness change following to your key presses?
182.
PURPOSE: This test will test the sleep key STEPS: 1. Press the sleep key on the keyboard 2. Wake your system up by pressing the power button VERIFICATION: Did the system go to sleep after pressing the sleep key?
2011-12-23
PURPOSE: This test will test the sleep key STEPS: 1. Press the sleep key on the keyboard 2. Wake your system up by pressing the power button VERIFICATION: Did the system go to sleep after pressing the sleep key?
231.
Panel Clock Verification tests
2011-12-23
Panel Clock Verification tests
237.
Server Services checks
2011-12-23
Server Services checks
292.
PURPOSE: This test will check that the system can switch to a virtual terminal and back to X STEPS: 1. Click "Test" to switch to another virtual terminal and then back to X VERIFICATION: Did your screen change temporarily to a text console and then switch back to your current session?
2011-12-23
PURPOSE: This test will check that the system can switch to a virtual terminal and back to X STEPS: 1. Click "Test" to switch to another virtual terminal and then back to X VERIFICATION: Did your screen change temporarily to a text console and then switch back to your current session?
293.
Run Firmware Test Suite (fwts) automated tests.
2011-12-23
Run Firmware Test Suite (fwts) automated tests.
313.
Test to detect the available network controllers
2011-12-23
Test to detect the available network controllers
317.
PURPOSE: This test will check your wired connection STEPS: 1. Click on the Network icon in the top panel 2. Select a network below the "Wired network" section 3. Click "Test" to verify that it's possible to establish a HTTP connection VERIFICATION: Did a notification show and was the connection correctly established?
2011-12-23
PURPOSE: This test will check your wired connection STEPS: 1. Click on the Network icon in the top panel 2. Select a network below the "Wired network" section 3. Click "Test" to verify that it's possible to establish a HTTP connection VERIFICATION: Did a notification show and was the connection correctly established?
318.
PURPOSE: This test will check that a DSL modem can be configured and connected. STEPS: 1. Connect the telephone line to the computer 2. Click on the Network icon on the top panel. 3. Select "Edit Connections" 4. Select the "DSL" tab 5. Click on "Add" button 6. Configure the connection parameters properly 7. Click "Test" to verify that it's possible to establish an HTTP connection VERIFICATION: Did a notification show and was the connection correctly established?
2011-12-23
PURPOSE: This test will check that a DSL modem can be configured and connected. STEPS: 1. Connect the telephone line to the computer 2. Click on the Network icon on the top panel. 3. Select "Edit Connections" 4. Select the "DSL" tab 5. Click on "Add" button 6. Configure the connection parameters properly 7. Click "Test" to verify that it's possible to establish an HTTP connection VERIFICATION: Did a notification show and was the connection correctly established?
324.
Automated test to walk multiple network cards and test each one in sequence.
2011-12-23
Automated test to walk multiple network cards and test each one in sequence.
325.
Test to detect the optical drives
2011-12-23
Test to detect the optical drives
333.
PURPOSE: This test will check your DVD playback capabilities STEPS: 1. Insert a DVD that contains any movie in your optical drive 2. Click "Test" to play the DVD in Totem VERIFICATION: Did the file play?
2011-12-23
PURPOSE: This test will check your DVD playback capabilities STEPS: 1. Insert a DVD that contains any movie in your optical drive 2. Click "Test" to play the DVD in Totem VERIFICATION: Did the file play?
336.
PURPOSE: This test will verify that you can reboot your system from the desktop menu STEPS: 1. Click the Gear icon in the upper right corner of the desktop and click on "Shut Down" 2. Click the "Restart" button on the left side of the Shut Down dialog 3. After logging back in, restart System Testing and it should resume here VERIFICATION: Did your system restart and bring up the GUI login cleanly?
2011-12-23
PURPOSE: This test will verify that you can reboot your system from the desktop menu STEPS: 1. Click the Gear icon in the upper right corner of the desktop and click on "Shut Down" 2. Click the "Restart" button on the left side of the Shut Down dialog 3. After logging back in, restart System Testing and it should resume here VERIFICATION: Did your system restart and bring up the GUI login cleanly?
337.
PURPOSE: This test will verify that a network printer is usable STEPS: 1. Make sure that a printer is available in your network 2. Click on the Gear icon in the upper right corner and then click on Printers 3. If the printer isn't already listed, click on Add 4. The printer should be detected and proper configuration values should be displayed 5. Print a test page VERIFICATION: Were you able to print a test page to the network printer?
2011-12-23
PURPOSE: This test will verify that a network printer is usable STEPS: 1. Make sure that a printer is available in your network 2. Click on the Gear icon in the upper right corner and then click on Printers 3. If the printer isn't already listed, click on Add 4. The printer should be detected and proper configuration values should be displayed 5. Print a test page VERIFICATION: Were you able to print a test page to the network printer?
359.
Check to see if CONFIG_NO_HZ is set in the kernel (this is just a simple regression check)
2011-12-23
Check to see if CONFIG_NO_HZ is set in the kernel (this is just a simple regression check)
372.
Verifies that sshd is running.
2011-12-23
Verifies that sshd is running.
373.
Verifies that Print/CUPs server is running.
2011-12-23
Verifies that Print/CUPs server is running.
374.
Verifies that DNS server is running and working.
2011-12-23
Verifies that DNS server is running and working.
375.
Verifies that Samba server is running.
2011-12-23
Verifies that Samba server is running.