Translations by mrx5682
mrx5682 has submitted the following strings to this translation. Contributions are visually coded: currently used translations, unreviewed suggestions, rejected suggestions.
1 → 22 of 22 results | First • Previous • Next • Last |
12. |
Test to detect audio devices
|
|
2011-12-17 |
Test to detect audio devices
|
|
13. |
PURPOSE:
This test will check that internal speakers work correctly
STEPS:
1. Make sure that no external speakers or headphones are connected
If testing a desktop, external speakers are allowed
2. Click the Test button to play a brief tone on your audio device
VERIFICATION:
Did you hear a tone?
|
|
2011-12-16 |
PURPOSE:
This test will check that internal speakers work correctly.
STEPS:
1.Make sure that no external speakers or headphones are connected
If testing a desktop, external speakers are allowed
2.Click the Test button to play a brief tone on your audio device
VERIFICATION:
Did you hear a tone?
|
|
16. |
PURPOSE:
This test will check that headphones connector works correctly
STEPS:
1. Connect a pair of headphones to your audio device
2. Click the Test button to play a sound to your audio device
VERIFICATION:
Did you hear a sound through the headphones and did the sound play without any distortion, clicks or other strange noises from your headphones?
|
|
2011-12-18 |
PURPOSE:
This test will check that headphones connector works correctly
STEPS:
1. Connect a pair of headphones to your audio device
2. Click the Test button to play a sound to your audio device.
VERIFICATION:
Did you hear a sound through the headphones and did the sound play without any distortion, clicks or other strange noises from your headphones?
|
|
17. |
PURPOSE:
This test will check that recording sound using the onboard microphone works correctly
STEPS:
1. Disconnect any external microphones that you have plugged in
2. Click "Test", then speak into your internal microphone
3. After a few seconds, your speech will be played back to you.
VERIFICATION:
Did you hear your speech played back?
|
|
2011-12-18 |
PURPOSE:
This test will check that recording sound using the onboard microphone works correctly
STEPS:
1. Disconnect any external microphones that you have plugged in
2. Click "Test", then speak into your internal microphone
3. After a few seconds, your speech will be played back to you.
VERIFICATION:
Did you hear your speech played back?
|
|
18. |
PURPOSE:
This test will check that recording sound using an external microphone works correctly
STEPS:
1. Connect a microphone to your microphone port
2. Click "Test", then speak into the external microphone
3. After a few seconds, your speech will be played back to you
VERIFICATION:
Did you hear your speech played back?
|
|
2011-12-18 |
PURPOSE:
This test will check that recording sound using an external microphone works correctly
STEPS:
1. Connect a microphone to your microphone port
2. Click "Test", then speak into the external microphone
3. After a few seconds, your speech will be played back to you
VERIFICATION:
Did you hear your speech played back?
|
|
67. |
Automated test to store bluetooth device information in checkbox report
|
|
2011-12-16 |
Automated test to store bluetooth device information in checkbox report
|
|
72. |
This Automated test attempts to detect a camera.
|
|
2011-12-16 |
This automated test attempts to detect a camera
|
|
78. |
Test the CPU scaling capabilities using Firmware Test Suite (fwts cpufreq).
|
|
2011-12-17 |
Test the CPU scaling capabilities using Firmware Test Suite (fwts cpufreq).
|
|
82. |
This test checks cpu topology for accuracy
|
|
2011-12-17 |
This test checks cpu topology for accuracy
|
|
83. |
This test checks that CPU frequency governors are obeyed when set.
|
|
2011-12-17 |
This test checks that CPU frequency governors are obeyed when set.
|
|
114. |
Test to output the Xorg version
|
|
2011-12-17 |
Test to output the Xorg version
|
|
115. |
PURPOSE:
This test will verify that the GUI is usable after manually changing resolution
STEPS:
1. Open the Displays application
2. Select a new resolution from the dropdown list
3. Click on Apply
4. Select the original resolution from the dropdown list
5. Click on Apply
VERIFICATION:
Did the resolution change as expected?
|
|
2011-12-17 |
PURPOSE:
This test will verify taht the GUI is usable after manually changing resolution
STEPS:
1. Open the Displays application
2. Select a new resolution from the dropdown list
3. Click on Apply
4. Select the original resolution from the dropdown list
5. Click on Apply
VERIFICATION:
Did the resolution change as expected?
|
|
296. |
Determine if we need to run tests specific to portable computers that may not apply to desktops.
|
|
2012-01-22 |
Determine if we need to run tests specific to portable computers that may not apply to desktops.
|
|
335. |
PURPOSE:
This test will verify that the desktop clock synchronizes with the system clock.
STEPS:
1. Click the "Test" button and verify the clock moves ahead by 1 hour.
Note: It may take a minute or so for the clock to refresh
2. Right click on the clock, then click on "Time & Date Settings..."
3. Ensure that your clock application is set to manual.
4. Change the time 1 hour back
5. Close the window and reboot
VERIFICATION:
Is your system clock displaying the correct date and time for your timezone?
|
|
2012-01-22 |
PURPOSE:
This test will verify that the desktop clock synchronizes with the system clock.
STEPS:
1. Click the "Test" button and verify the clock moves ahead by 1 hour.
Note: It may take a minute or so for the clock to refresh
2. Right click on the clock, then click on "Time & Date Settings..."
3. Ensure that your clock application is set to manual.
4. Change the time 1 hour back
5. Close the window and reboot
VERIFICATION:
Is your system clock displaying the correct date and time for your timezone?
|
|
516. |
PURPOSE:
This test will check that the file browser can create a new folder.
STEPS:
1. Click Test to open the File Browser.
2. On the menu bar, click File -> Create Folder.
3. In the name box for the new folder, enter the name Test Folder and hit Enter.
4. Close the File browser.
VERIFICATION:
Do you now have a new folder called Test Folder?
|
|
2012-01-22 |
PURPOSE:
This test will check that the file browser can create a new folder.
STEPS:
1. Click Test to open the File Browser.
2. On the menu bar, click File -> Create Folder.
3. In the name box for the new folder, enter the name Test Folder and hit Enter.
4. Close the File browser.
VERIFICATION:
Do you now have a new folder called Test Folder?
|
|
529. |
PURPOSE:
This test will check that Firefox can play a Quicktime (.mov) video file.
Note: this may require installing additional software to successfully
complete.
STEPS:
1. Select Test to launch Firefox with a sample video.
VERIFICATION:
Did the video play using a plugin?
|
|
2012-01-22 |
PURPOSE:
This test will check that Firefox can play a Quicktime (.mov) video file.
Note: this may require installing additional software to successfully
complete.
STEPS:
1. Select Test to launch Firefox with a sample video.
VERIFICATION:
Did the video play using a plugin?
|
|
552. |
Tests that the systems wireless hardware can connect to a router using WPA security and the 802.11b/g protocols.
|
|
2012-01-22 |
Tests that the systems wireless hardware can connect to a router using WPA security and the 802.11b/g protocols.
|
|
554. |
Tests that the systems wireless hardware can connect to a router using WPA security and the 802.11n protocol.
|
|
2012-01-22 |
Tests that the systems wireless hardware can connect to a router using WPA security and the 802.11n protocol.
|
|
556. |
Tests the performance of a systems wireless connection through the iperf tool.
|
|
2012-01-22 |
Tests the performance of a systems wireless connection through the iperf tool.
|
|
557. |
Tests the performance of a systems wireless connection through the iperf tool, using UDP packets.
|
|
2012-01-22 |
Tests the performance of a systems wireless connection through the iperf tool, using UDP packets.
|
|
571. |
Command not found.
|
|
2012-01-22 |
Command not found.
|
|
640. |
The generated report seems to have validation errors,
so it might not be processed by Launchpad.
|
|
2012-01-22 |
The generated report seems to have validation errors,
so it might not be processed by Launchpad.
|