Translations by Jared Norris
Jared Norris has submitted the following strings to this translation. Contributions are visually coded: currently used translations, unreviewed suggestions, rejected suggestions.
| 12. |
Test to detect audio devices
|
|
| 2011-12-14 |
Test to detect audio devices
|
|
| 13. |
PURPOSE:
This test will check that internal speakers work correctly
STEPS:
1. Make sure that no external speakers or headphones are connected
If testing a desktop, external speakers are allowed
2. Click the Test button to play a brief tone on your audio device
VERIFICATION:
Did you hear a tone?
|
|
| 2011-12-14 |
PURPOSE:
This test will check that internal speakers work correctly
STEPS:
1. Make sure that no external speakers or headphones are connected
If testing a desktop, external speakers are allowed
2. Click the Test button to play a brief tone on your audio device
VERIFICATION:
Did you hear a tone?
|
|
| 16. |
PURPOSE:
This test will check that headphones connector works correctly
STEPS:
1. Connect a pair of headphones to your audio device
2. Click the Test button to play a sound to your audio device
VERIFICATION:
Did you hear a sound through the headphones and did the sound play without any distortion, clicks or other strange noises from your headphones?
|
|
| 2011-12-14 |
PURPOSE:
This test will check that headphones connector works correctly
STEPS:
1. Connect a pair of headphones to your audio device
2. Click the Test button to play a sound to your audio device
VERIFICATION:
Did you hear a sound through the headphones and did the sound play without any distortion, clicks or other strange noises from your headphones?
|
|
| 17. |
PURPOSE:
This test will check that recording sound using the onboard microphone works correctly
STEPS:
1. Disconnect any external microphones that you have plugged in
2. Click "Test", then speak into your internal microphone
3. After a few seconds, your speech will be played back to you.
VERIFICATION:
Did you hear your speech played back?
|
|
| 2011-12-14 |
PURPOSE:
This test will check that recording sound using the onboard microphone works correctly
STEPS:
1. Disconnect any external microphones that you have plugged in
2. Click "Test", then speak into your internal microphone
3. After a few seconds, your speech will be played back to you.
VERIFICATION:
Did you hear your speech played back?
|
|
| 18. |
PURPOSE:
This test will check that recording sound using an external microphone works correctly
STEPS:
1. Connect a microphone to your microphone port
2. Click "Test", then speak into the external microphone
3. After a few seconds, your speech will be played back to you
VERIFICATION:
Did you hear your speech played back?
|
|
| 2011-12-14 |
PURPOSE:
This test will check that recording sound using an external microphone works correctly
STEPS:
1. Connect a microphone to your microphone port
2. Click "Test", then speak into the external microphone
3. After a few seconds, your speech will be played back to you
VERIFICATION:
Did you hear your speech played back?
|
|
| 30. |
Run gtkperf to make sure that GTK based test cases work
|
|
| 2011-07-21 |
Run gtkperf to make sure that GTK based test cases work
|
|
| 35. |
Run Qgears2 OpenGL image scaling benchmark
|
|
| 2012-09-26 |
Run Qgears2 OpenGL image scaling benchmark
|
|
| 36. |
Run GLmark2-ES2 benchmark
|
|
| 2012-09-26 |
Run GLmark2-ES2 benchmark
|
|
| 37. |
Run GLmark2 benchmark
|
|
| 2012-09-26 |
Run GLmark2 benchmark
|
|
| 39. |
Run Unigine Santuary benchmark
|
|
| 2012-09-26 |
Run Unigine Sanctuary benchmark
|
|
| 40. |
Run Unigine Tropics benchmark
|
|
| 2012-09-26 |
Run Unigine Tropics benchmark
|
|
| 41. |
Run Unigine Heaven benchmark
|
|
| 2012-09-26 |
Run Unigine Heaven benchmark
|
|
| 42. |
Run Lightsmark benchmark
|
|
| 2012-09-26 |
Run Lightsmark benchmark
|
|
| 43. |
Run Cachebench Read benchmark
|
|
| 2012-09-26 |
Run Cachebench Read benchmark
|
|
| 44. |
Run Cachebench Write benchmark
|
|
| 2012-09-26 |
Run Cachebench Write benchmark
|
|
| 45. |
Run Cachebench Read / Modify / Write benchmark
|
|
| 2012-09-26 |
Run Cachebench Read / Modify / Write benchmark
|
|
| 46. |
Run Stream Copy benchmark
|
|
| 2012-09-26 |
Run Stream Copy benchmark
|
|
| 47. |
Run Stream Scale benchmark
|
|
| 2012-09-26 |
Run Stream Scale benchmark
|
|
| 48. |
Run Stream Add benchmark
|
|
| 2012-09-26 |
Run Stream Add benchmark
|
|
| 49. |
Run Stream Triad benchmark
|
|
| 2012-09-26 |
Run Stream Triad benchmark
|
|
| 50. |
Run Network Loopback benchmark
|
|
| 2012-09-26 |
Run Network Loopback benchmark
|
|
| 51. |
Check the time needed to reconnect to a WIFI access point
|
|
| 2012-09-26 |
Check the time needed to reconnect to a WIFI access point
|
|
| 52. |
Run Encode MP3 benchmark
|
|
| 2012-09-26 |
Run Encode MP3 benchmark
|
|
| 53. |
Run x264 H.264/AVC encoder benchmark
|
|
| 2012-09-26 |
Run x264 H.264/AVC encoder benchmark
|
|
| 54. |
Run GnuPG benchmark
|
|
| 2012-09-26 |
Run GnuPG benchmark
|
|
| 55. |
Run Compress PBZIP2 benchmark
|
|
| 2012-09-26 |
Run Compress PBZIP2 benchmark
|
|
| 56. |
Run Compress 7ZIP benchmark
|
|
| 2012-09-26 |
Run Compress 7ZIP benchmark
|
|
| 57. |
Run N-Queens benchmark
|
|
| 2012-09-26 |
Run N-Queens benchmark
|
|
| 58. |
Run Himeno benchmark
|
|
| 2012-09-26 |
Run Himeno benchmark
|
|
| 59. |
CPU utilization on an idle system.
|
|
| 2012-09-26 |
CPU utilisation on an idle system.
|
|
| 60. |
Disk utilization on an idle system.
|
|
| 2012-09-26 |
Disk utilisation on an idle system.
|
|
| 67. |
Automated test to store bluetooth device information in checkbox report
|
|
| 2011-12-14 |
Automated test to store bluetooth device information in checkbox report
|
|
| 68. |
PURPOSE:
This test will check that bluetooth connection works correctly
STEPS:
1. Enable bluetooth on any mobile device (PDA, smartphone, etc.)
2. Click on the bluetooth icon in the menu bar
3. Select 'Setup new device'
4. Look for the device in the list and select it
5. In the device write the PIN code automatically chosen by the wizard
6. The device should pair with the computer
7. Right-click on the bluetooth icon and select browse files
8. Authorize the computer to browse the files in the device if needed
9. You should be able to browse the files
VERIFICATION:
Did all the steps work?
|
|
| 2011-12-14 |
PURPOSE:
This test will check that bluetooth connection works correctly
STEPS:
1. Enable bluetooth on any mobile device (PDA, smartphone, etc.)
2. Click on the bluetooth icon in the menu bar
3. Select 'Setup new device'
4. Look for the device in the list and select it
5. In the device write the PIN code automatically chosen by the wizard
6. The device should pair with the computer
7. Right-click on the bluetooth icon and select browse files
8. Authorise the computer to browse the files in the device if needed
9. You should be able to browse the files
VERIFICATION:
Did all the steps work?
|
|
| 69. |
PURPOSE:
This test will check that you can transfer information through a bluetooth connection
STEPS:
1. Make sure that you're able to browse the files in your mobile device
2. Copy a file from the computer to the mobile device
3. Copy a file from the mobile device to the computer
VERIFICATION:
Were all files copied correctly?
|
|
| 2011-12-14 |
PURPOSE:
This test will check that you can transfer information through a bluetooth connection
STEPS:
1. Make sure that you're able to browse the files in your mobile device
2. Copy a file from the computer to the mobile device
3. Copy a file from the mobile device to the computer
VERIFICATION:
Were all files copied correctly?
|
|
| 70. |
PURPOSE:
This test will check that you can record and hear audio using a bluetooth audio device
STEPS:
1. Enable the bluetooth headset
2. Click on the bluetooth icon in the menu bar
3. Select 'Setup new device'
4. Look for the device in the list and select it
5. In the device write the PIN code automatically chosen by the wizard
6. The device should pair with the computer
7. Click "Test" to record for five seconds and reproduce in the bluetooth device
VERIFICATION:
Did you hear the sound you recorded in the bluetooth
|
|
| 2011-12-14 |
PURPOSE:
This test will check that you can record and hear audio using a bluetooth audio device
STEPS:
1. Enable the bluetooth headset
2. Click on the bluetooth icon in the menu bar
3. Select 'Setup new device'
4. Look for the device in the list and select it
5. In the device write the PIN code automatically chosen by the wizard
6. The device should pair with the computer
7. Click "Test" to record for five seconds and reproduce in the bluetooth device
VERIFICATION:
Did you hear the sound you recorded in the bluetooth
|
|
| 72. |
This Automated test attempts to detect a camera.
|
|
| 2011-12-14 |
This Automated test attempts to detect a camera.
|
|
| 75. |
Takes multiple pictures based on the resolutions supported by the camera and
validates their size and that they are of a valid format.
|
|
| 2012-09-26 |
Takes multiple pictures based on the resolutions supported by the camera and
validates their size and that they are of a valid format.
|
|
| 76. |
PURPOSE:
This test will verify your system's ability to play Ogg Vorbis audio files.
STEPS:
1. Click Test to play an Ogg Vorbis file (.ogg)
2. Please close the player to proceed.
VERIFICATION:
Did the sample play correctly?
|
|
| 2011-12-14 |
PURPOSE:
This test will verify your system's ability to play Ogg Vorbis audio files.
STEPS:
1. Click Test to play an Ogg Vorbis file (.ogg)
2. Please close the player to proceed.
VERIFICATION:
Did the sample play correctly?
|
|
| 77. |
PURPOSE:
This test will verify your system's ability to play Wave Audio files.
STEPS:
1. Select Test to play a Wave Audio format file (.wav)
2. Please close the player to proceed.
VERIFICATION:
Did the sample play correctly?
|
|
| 2011-12-14 |
PURPOSE:
This test will verify your system's ability to play Wave Audio files.
STEPS:
1. Select Test to play a Wave Audio format file (.wav)
2. Please close the player to proceed.
VERIFICATION:
Did the sample play correctly?
|
|
| 78. |
Test the CPU scaling capabilities using Firmware Test Suite (fwts cpufreq).
|
|
| 2011-12-14 |
Test the CPU scaling capabilities using Firmware Test Suite (fwts cpufreq).
|
|
| 79. |
Attaches the log generated by cpu/scaling_test to the results
|
|
| 2012-09-26 |
Attaches the log generated by cpu/scaling_test to the results
|
|
| 80. |
Test for clock jitter.
|
|
| 2011-07-21 |
Test for clock jitter.
|
|
| 81. |
Test offlining CPUs in a multicore system.
|
|
| 2011-07-21 |
Test off-lining CPUs in a multi-core system.
|
|
| 82. |
This test checks cpu topology for accuracy
|
|
| 2011-12-14 |
This test checks cpu topology for accuracy
|
|
| 83. |
This test checks that CPU frequency governors are obeyed when set.
|
|
| 2011-12-14 |
This test checks that CPU frequency governors are obeyed when set.
|
|
| 84. |
Validate that the Vector Floating Point Unit is running on ARM device
|
|
| 2012-09-26 |
Validate that the Vector Floating Point Unit is running on ARM device
|
|
| 85. |
Test if the atd daemon is running when the package is installed.
|
|
| 2011-07-21 |
Test if the atd daemon is running when the package is installed.
|
|
| 86. |
Test if the cron daemon is running when the package is installed.
|
|
| 2011-07-21 |
Test if the cron daemon is running when the package is installed.
|
|
| 87. |
Test if the cupsd daemon is running when the package is installed.
|
|
| 2011-07-21 |
Test if the cupsd daemon is running when the package is installed.
|
|
| 88. |
Test if the getty daemon is running when the package is installed.
|
|
| 2011-07-21 |
Test if the getty daemon is running when the package is installed.
|
|
