Translations by Luo Lei

DEPRECATION WARNING: %s

Home directory of user '%s' is not '%s', ignoring.

OK, so you are running PA in system mode. Please note that you most likely shouldn't be doing that. If you do it nonetheless then it's your own fault if things don't work as expected. Please read http://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/WhatIsWrongWithSystemWide/ for an explanation why system mode is usually a bad idea.

Amplifier

No Amplifier

Handsfree Gateway

High Fidelity Playback (A2DP Sink)

High Fidelity Capture (A2DP Source)

source_name=<name for the source> source_properties=<properties for the source> source_master=<name of source to filter> sink_name=<name for the sink> sink_properties=<properties for the sink> sink_master=<name of sink to filter> adjust_time=<how often to readjust rates in s> adjust_threshold=<how much drift to readjust after in ms> format=<sample format> rate=<sample rate> channels=<number of channels> channel_map=<channel map> aec_method=<implementation to use> aec_args=<parameters for the AEC engine> save_aec=<save AEC data in /tmp> autoloaded=<set if this module is being loaded automatically> use_volume_sharing=<yes or no>

Dummy Output

sink_name=<name of the sink> sink_properties=<properties for the sink> sink_master=<sink to connect to> format=<sample format> rate=<sample rate> channels=<number of channels> channel_map=<channel map> autoloaded=<set if this module is being loaded automatically> use_volume_sharing=<yes or no>

autoclean=<automatically unload unused filters?>

sink_name=<name for the sink> sink_properties=<properties for the sink> master=<name of sink to filter> format=<sample format> rate=<sample rate> channels=<number of channels> channel_map=<input channel map> plugin=<ladspa plugin name> label=<ladspa plugin label> control=<comma separated list of input control values> input_ladspaport_map=<comma separated list of input LADSPA port names> output_ladspaport_map=<comma separated list of output LADSPA port names>

Tunnel for %s@%s

Tunnel to %s/%s

Virtual surround sink

sink_name=<name for the sink> sink_properties=<properties for the sink> master=<name of sink to filter> format=<sample format> rate=<sample rate> channels=<number of channels> channel_map=<channel map> use_volume_sharing=<yes or no> force_flat_volume=<yes or no> hrir=/path/to/left_hrir.wav

XDG_RUNTIME_DIR (%s) is not owned by us (uid %d), but by uid %d! (This could e g happen if you try to connect to a non-root PulseAudio as a root user, over the native protocol. Don't do that.)

Obsolete functionality

Got EOF.

%s [options] %s -h, --help Show this help --version Show version -r, --record Create a connection for recording -p, --playback Create a connection for playback -v, --verbose Enable verbose operations -s, --server=SERVER The name of the server to connect to -d, --device=DEVICE The name of the sink/source to connect to -n, --client-name=NAME How to call this client on the server --stream-name=NAME How to call this stream on the server --volume=VOLUME Specify the initial (linear) volume in range 0...65536 --rate=SAMPLERATE The sample rate in Hz (defaults to 44100) --format=SAMPLEFORMAT The sample type, one of s16le, s16be, u8, float32le, float32be, ulaw, alaw, s32le, s32be, s24le, s24be, s24-32le, s24-32be (defaults to s16ne) --channels=CHANNELS The number of channels, 1 for mono, 2 for stereo (defaults to 2) --channel-map=CHANNELMAP Channel map to use instead of the default --fix-format Take the sample format from the sink/source the stream is being connected to. --fix-rate Take the sampling rate from the sink/source the stream is being connected to. --fix-channels Take the number of channels and the channel map from the sink/source the stream is being connected to. --no-remix Don't upmix or downmix channels. --no-remap Map channels by index instead of name. --latency=BYTES Request the specified latency in bytes. --process-time=BYTES Request the specified process time per request in bytes. --latency-msec=MSEC Request the specified latency in msec. --process-time-msec=MSEC Request the specified process time per request in msec. --property=PROPERTY=VALUE Set the specified property to the specified value. --raw Record/play raw PCM data. --passthrough Passthrough data. --file-format[=FFORMAT] Record/play formatted PCM data. --list-file-formats List available file formats. --monitor-stream=INDEX Record from the sink input with index INDEX.

Play back encoded audio files on a PulseAudio sound server.

Capture audio data from a PulseAudio sound server and write it to a file.

Capture audio data from a PulseAudio sound server and write it to STDOUT or the specified file.

Play back audio data from STDIN or the specified file on a PulseAudio sound server.

pacat %s Compiled with libpulse %s Linked with libpulse %s

Invalid sample specification

Failed to generate sample specification for file.

NAME SINK|#N

FILENAME SINK|#N

#N SINK|SOURCE

NUMERIC-LEVEL

pacmd %s Compiled with libpulse %s Linked with libpulse %s

Sink #%u State: %s Name: %s Description: %s Driver: %s Sample Specification: %s Channel Map: %s Owner Module: %u Mute: %s Volume: %s balance %0.2f Base Volume: %s Monitor Source: %s Latency: %0.0f usec, configured %0.0f usec Flags: %s%s%s%s%s%s%s Properties: %s

Source #%u State: %s Name: %s Description: %s Driver: %s Sample Specification: %s Channel Map: %s Owner Module: %u Mute: %s Volume: %s balance %0.2f Base Volume: %s Monitor of Sink: %s Latency: %0.0f usec, configured %0.0f usec Flags: %s%s%s%s%s%s Properties: %s

%s: %s (sinks: %u, sources: %u, priority: %u, available: %s)

Failed to get sink input information: %s

Sink Input #%u Driver: %s Owner Module: %s Client: %s Sink: %u Sample Specification: %s Channel Map: %s Format: %s Corked: %s Mute: %s Volume: %s balance %0.2f Buffer Latency: %0.0f usec Sink Latency: %0.0f usec Resample method: %s Properties: %s

Source Output #%u Driver: %s Owner Module: %s Client: %s Source: %u Sample Specification: %s Channel Map: %s Format: %s Corked: %s Mute: %s Volume: %s balance %0.2f Buffer Latency: %0.0f usec Source Latency: %0.0f usec Resample method: %s Properties: %s

sink-input

source-output

sample-cache

The special names @DEFAULT_SINK@, @DEFAULT_SOURCE@ and @DEFAULT_MONITOR@ can be used to specify the default sink, source and monitor.

pactl %s Compiled with libpulse %s Linked with libpulse %s

Specify nothing, or one of: %s

You have to specify a sink name/index and a mute action (0, 1, or 'toggle')

You have to specify a sink input index and a mute action (0, 1, or 'toggle')

You have to specify a sink index and a semicolon-separated list of supported formats

pasuspender %s Compiled with libpulse %s Linked with libpulse %s