Translations by Joel Addison
Joel Addison has submitted the following strings to this translation. Contributions are visually coded: currently used translations, unreviewed suggestions, rejected suggestions.
~ |
=== %d seconds: %d Hz %d ch (%s) -> %d Hz %d ch (%s)
|
|
2012-09-22 |
=== %d seconds: %d Hz %d ch (%s) -> %d Hz %d ch (%s)
|
|
~ |
Analog 4-channel Input
|
|
2012-09-22 |
Analog 4-channel Input
|
|
1. |
%s [options]
COMMANDS:
-h, --help Show this help
--version Show version
--dump-conf Dump default configuration
--dump-modules Dump list of available modules
--dump-resample-methods Dump available resample methods
--cleanup-shm Cleanup stale shared memory segments
--start Start the daemon if it is not running
-k --kill Kill a running daemon
--check Check for a running daemon (only returns exit code)
OPTIONS:
--system[=BOOL] Run as system-wide instance
-D, --daemonize[=BOOL] Daemonize after startup
--fail[=BOOL] Quit when startup fails
--high-priority[=BOOL] Try to set high nice level
(only available as root, when SUID or
with elevated RLIMIT_NICE)
--realtime[=BOOL] Try to enable realtime scheduling
(only available as root, when SUID or
with elevated RLIMIT_RTPRIO)
--disallow-module-loading[=BOOL] Disallow module user requested module
loading/unloading after startup
--disallow-exit[=BOOL] Disallow user requested exit
--exit-idle-time=SECS Terminate the daemon when idle and this
time passed
--scache-idle-time=SECS Unload autoloaded samples when idle and
this time passed
--log-level[=LEVEL] Increase or set verbosity level
-v --verbose Increase the verbosity level
--log-target={auto,syslog,stderr,file:PATH,newfile:PATH}
Specify the log target
--log-meta[=BOOL] Include code location in log messages
--log-time[=BOOL] Include timestamps in log messages
--log-backtrace=FRAMES Include a backtrace in log messages
-p, --dl-search-path=PATH Set the search path for dynamic shared
objects (plugins)
--resample-method=METHOD Use the specified resampling method
(See --dump-resample-methods for
possible values)
--use-pid-file[=BOOL] Create a PID file
--no-cpu-limit[=BOOL] Do not install CPU load limiter on
platforms that support it.
--disable-shm[=BOOL] Disable shared memory support.
STARTUP SCRIPT:
-L, --load="MODULE ARGUMENTS" Load the specified plugin module with
the specified argument
-F, --file=FILENAME Run the specified script
-C Open a command line on the running TTY
after startup
-n Don't load default script file
|
|
2015-05-20 |
%s [options]
COMMANDS:
-h, --help Show this help
--version Show version
--dump-conf Dump default configuration
--dump-modules Dump list of available modules
--dump-resample-methods Dump available resample methods
--cleanup-shm Cleanup stale shared memory segments
--start Start the daemon if it is not running
-k --kill Kill a running daemon
--check Check for a running daemon (only returns exit code)
OPTIONS:
--system[=BOOL] Run as system-wide instance
-D, --daemonize[=BOOL] Daemonise after startup
--fail[=BOOL] Quit when startup fails
--high-priority[=BOOL] Try to set high nice level
(only available as root, when SUID or
with elevated RLIMIT_NICE)
--realtime[=BOOL] Try to enable realtime scheduling
(only available as root, when SUID or
with elevated RLIMIT_RTPRIO)
--disallow-module-loading[=BOOL] Disallow module user requested module
loading/unloading after startup
--disallow-exit[=BOOL] Disallow user requested exit
--exit-idle-time=SECS Terminate the daemon when idle and this
time passed
--scache-idle-time=SECS Unload autoloaded samples when idle and
this time passed
--log-level[=LEVEL] Increase or set verbosity level
-v --verbose Increase the verbosity level
--log-target={auto,syslog,stderr,file:PATH,newfile:PATH}
Specify the log target
--log-meta[=BOOL] Include code location in log messages
--log-time[=BOOL] Include timestamps in log messages
--log-backtrace=FRAMES Include a backtrace in log messages
-p, --dl-search-path=PATH Set the search path for dynamic shared
objects (plugins)
--resample-method=METHOD Use the specified resampling method
(See --dump-resample-methods for
possible values)
--use-pid-file[=BOOL] Create a PID file
--no-cpu-limit[=BOOL] Do not install CPU load limiter on
platforms that support it.
--disable-shm[=BOOL] Disable shared memory support.
STARTUP SCRIPT:
-L, --load="MODULE ARGUMENTS" Load the specified plugin module with
the specified argument
-F, --file=FILENAME Run the specified script
-C Open a command line on the running TTY
after startup
-n Don't load default script file
|
|
10. |
Invalid log target: use either 'syslog', 'journal','stderr' or 'auto' or a valid file name 'file:<path>', 'newfile:<path>'.
|
|
2015-05-20 |
Invalid log target: use either 'syslog', 'journal','stderr' or 'auto' or a valid file name 'file:<path>', 'newfile:<path>'.
|
|
74. |
OK, so you are running PA in system mode. Please note that you most likely shouldn't be doing that.
If you do it nonetheless then it's your own fault if things don't work as expected.
Please read http://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/WhatIsWrongWithSystemWide/ for an explanation why system mode is usually a bad idea.
|
|
2015-05-20 |
OK, so you are running PA in system mode. Please note that you most likely shouldn't be doing that.
If you do it nonetheless then it's your own fault if things don't work as expected.
Please read http://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/WhatIsWrongWithSystemWide/ for an explanation why system mode is usually a bad idea.
|
|
84. |
Docking Station Line In
|
|
2012-02-08 |
Docking Station Line In
|
|
107. |
LFE on Separate Mono Output
|
|
2012-02-08 |
LFE on Separate Mono Output
|
|
117. |
Multichannel
|
|
2015-05-20 |
Multichannel
|
|
133. |
Digital Surround 5.1 (IEC958/DTS)
|
|
2012-09-22 |
Digital Surround 5.1 (IEC958/DTS)
|
|
161. |
High Fidelity Playback (A2DP Sink)
|
|
2015-05-20 |
High Fidelity Playback (A2DP Sink)
|
|
162. |
High Fidelity Capture (A2DP Source)
|
|
2015-05-20 |
High Fidelity Capture (A2DP Source)
|
|
163. |
Headset Head Unit (HSP/HFP)
|
|
2015-05-20 |
Headset Head Unit (HSP/HFP)
|
|
164. |
Headset Audio Gateway (HSP/HFP)
|
|
2015-05-20 |
Headset Audio Gateway (HSP/HFP)
|
|
165. |
source_name=<name for the source> source_properties=<properties for the source> source_master=<name of source to filter> sink_name=<name for the sink> sink_properties=<properties for the sink> sink_master=<name of sink to filter> adjust_time=<how often to readjust rates in s> adjust_threshold=<how much drift to readjust after in ms> format=<sample format> rate=<sample rate> channels=<number of channels> channel_map=<channel map> aec_method=<implementation to use> aec_args=<parameters for the AEC engine> save_aec=<save AEC data in /tmp> autoloaded=<set if this module is being loaded automatically> use_volume_sharing=<yes or no>
|
|
2012-09-22 |
source_name=<name for the source> source_properties=<properties for the source> source_master=<name of source to filter> sink_name=<name for the sink> sink_properties=<properties for the sink> sink_master=<name of sink to filter> adjust_time=<how often to readjust rates in s> adjust_threshold=<how much drift to readjust after in ms> format=<sample format> rate=<sample rate> channels=<number of channels> channel_map=<channel map> aec_method=<implementation to use> aec_args=<parameters for the AEC engine> save_aec=<save AEC data in /tmp> autoloaded=<set if this module is being loaded automatically> use_volume_sharing=<yes or no>
|
|
179. |
Tunnel for %s@%s
|
|
2015-05-20 |
Tunnel for %s@%s
|
|
180. |
Tunnel to %s/%s
|
|
2015-05-20 |
Tunnel to %s/%s
|
|
181. |
Virtual surround sink
|
|
2012-09-22 |
Virtual surround sink
|
|
182. |
sink_name=<name for the sink> sink_properties=<properties for the sink> master=<name of sink to filter> format=<sample format> rate=<sample rate> channels=<number of channels> channel_map=<channel map> use_volume_sharing=<yes or no> force_flat_volume=<yes or no> hrir=/path/to/left_hrir.wav
|
|
2012-09-22 |
sink_name=<name for the sink> sink_properties=<properties for the sink> master=<name of sink to filter> format=<sample format> rate=<sample rate> channels=<number of channels> channel_map=<channel map> use_volume_sharing=<yes or no> force_flat_volume=<yes or no> hrir=/path/to/left_hrir.wav
|
|
248. |
input
|
|
2015-05-20 |
input
|
|
249. |
output
|
|
2015-05-20 |
output
|
|
250. |
bidirectional
|
|
2015-05-20 |
bidirectional
|
|
251. |
invalid
|
|
2015-05-20 |
invalid
|
|
252. |
XDG_RUNTIME_DIR (%s) is not owned by us (uid %d), but by uid %d! (This could e g happen if you try to connect to a non-root PulseAudio as a root user, over the native protocol. Don't do that.)
|
|
2015-05-20 |
XDG_RUNTIME_DIR (%s) is not owned by us (uid %d), but by uid %d! (This could e.g. happen if you try to connect to a non-root PulseAudio as a root user, over the native protocol. Don't do that.)
|
|
254. |
Failed to open target file '%s'.
|
|
2015-05-20 |
Failed to open target file '%s'.
|
|
255. |
Tried to open target file '%s', '%s.1', '%s.2' ... '%s.%d', but all failed.
|
|
2015-05-20 |
Tried to open target file '%s', '%s.1', '%s.2' ... '%s.%d', but all failed.
|
|
256. |
Invalid log target.
|
|
2015-05-20 |
Invalid log target.
|
|
257. |
Built-in Audio
|
|
2012-02-08 |
Built-in Audio
|
|
268. |
No authentication key
|
|
2015-05-20 |
No authentication key
|
|
273. |
Module initialization failed
|
|
2012-09-22 |
Module initialisation failed
|
|
305. |
Connected to device %s (index: %u, suspended: %s).
|
|
2015-05-20 |
Connected to device %s (index: %u, suspended: %s).
|
|
321. |
Failed to set monitor stream: %s
|
|
2015-05-20 |
Failed to set monitor stream: %s
|
|
330. |
%s [options]
-h, --help Show this help
--version Show version
-r, --record Create a connection for recording
-p, --playback Create a connection for playback
-v, --verbose Enable verbose operations
-s, --server=SERVER The name of the server to connect to
-d, --device=DEVICE The name of the sink/source to connect to
-n, --client-name=NAME How to call this client on the server
--stream-name=NAME How to call this stream on the server
--volume=VOLUME Specify the initial (linear) volume in range 0...65536
--rate=SAMPLERATE The sample rate in Hz (defaults to 44100)
--format=SAMPLEFORMAT The sample type, one of s16le, s16be, u8, float32le,
float32be, ulaw, alaw, s32le, s32be, s24le, s24be,
s24-32le, s24-32be (defaults to s16ne)
--channels=CHANNELS The number of channels, 1 for mono, 2 for stereo
(defaults to 2)
--channel-map=CHANNELMAP Channel map to use instead of the default
--fix-format Take the sample format from the sink/source the stream is
being connected to.
--fix-rate Take the sampling rate from the sink/source the stream is
being connected to.
--fix-channels Take the number of channels and the channel map
from the sink/source the stream is being connected to.
--no-remix Don't upmix or downmix channels.
--no-remap Map channels by index instead of name.
--latency=BYTES Request the specified latency in bytes.
--process-time=BYTES Request the specified process time per request in bytes.
--latency-msec=MSEC Request the specified latency in msec.
--process-time-msec=MSEC Request the specified process time per request in msec.
--property=PROPERTY=VALUE Set the specified property to the specified value.
--raw Record/play raw PCM data.
--passthrough Passthrough data.
--file-format[=FFORMAT] Record/play formatted PCM data.
--list-file-formats List available file formats.
--monitor-stream=INDEX Record from the sink input with index INDEX.
|
|
2015-05-20 |
%s [options]
-h, --help Show this help
--version Show version
-r, --record Create a connection for recording
-p, --playback Create a connection for playback
-v, --verbose Enable verbose operations
-s, --server=SERVER The name of the server to connect to
-d, --device=DEVICE The name of the sink/source to connect to
-n, --client-name=NAME How to call this client on the server
--stream-name=NAME How to call this stream on the server
--volume=VOLUME Specify the initial (linear) volume in range 0...65536
--rate=SAMPLERATE The sample rate in Hz (defaults to 44100)
--format=SAMPLEFORMAT The sample type, one of s16le, s16be, u8, float32le,
float32be, ulaw, alaw, s32le, s32be, s24le, s24be,
s24-32le, s24-32be (defaults to s16ne)
--channels=CHANNELS The number of channels, 1 for mono, 2 for stereo
(defaults to 2)
--channel-map=CHANNELMAP Channel map to use instead of the default
--fix-format Take the sample format from the sink/source the stream is
being connected to.
--fix-rate Take the sampling rate from the sink/source the stream is
being connected to.
--fix-channels Take the number of channels and the channel map
from the sink/source the stream is being connected to.
--no-remix Don't upmix or downmix channels.
--no-remap Map channels by index instead of name.
--latency=BYTES Request the specified latency in bytes.
--process-time=BYTES Request the specified process time per request in bytes.
--latency-msec=MSEC Request the specified latency in msec.
--process-time-msec=MSEC Request the specified process time per request in msec.
--property=PROPERTY=VALUE Set the specified property to the specified value.
--raw Record/play raw PCM data.
--passthrough Passthrough data.
--file-format[=FFORMAT] Record/play formatted PCM data.
--list-file-formats List available file formats.
--monitor-stream=INDEX Record from the sink input with index INDEX.
|
|
339. |
Failed to parse the argument for --monitor-stream
|
|
2015-05-20 |
Failed to parse the argument for --monitor-stream
|
|
354. |
Failed to set media name.
|
|
2012-09-22 |
Failed to set media name.
|
|
362. |
NAME|#N
|
|
2012-09-22 |
NAME|#N
|
|
368. |
NAME|#N KEY=VALUE
|
|
2012-09-22 |
NAME|#N KEY=VALUE
|
|
369. |
#N KEY=VALUE
|
|
2012-09-22 |
#N KEY=VALUE
|
|
371. |
NAME SINK|#N
|
|
2012-09-22 |
NAME SINK|#N
|
|
372. |
NAME FILENAME
|
|
2012-09-22 |
NAME FILENAME
|
|
373. |
PATHNAME
|
|
2012-09-22 |
PATHNAME
|
|
374. |
FILENAME SINK|#N
|
|
2012-09-22 |
FILENAME SINK|#N
|
|
376. |
1|0
|
|
2012-09-22 |
1|0
|
|
381. |
NUMERIC LEVEL
|
|
2012-09-22 |
NUMERIC LEVEL
|
|
382. |
FRAMES
|
|
2012-09-22 |
FRAMES
|
|
383. |
-h, --help Show this help
--version Show version
When no command is given pacmd starts in the interactive mode.
|
|
2015-05-20 |
-h, --help Show this help
--version Show version
When no command is given pacmd starts in the interactive mode.
|
|
384. |
pacmd %s
Compiled with libpulse %s
Linked with libpulse %s
|
|
2012-09-22 |
pacmd %s
Compiled with libpulse %s
Linked with libpulse %s
|
|
401. |
Sink #%u
State: %s
Name: %s
Description: %s
Driver: %s
Sample Specification: %s
Channel Map: %s
Owner Module: %u
Mute: %s
Volume: %s
balance %0.2f
Base Volume: %s
Monitor Source: %s
Latency: %0.0f usec, configured %0.0f usec
Flags: %s%s%s%s%s%s%s
Properties:
%s
|
|
2015-05-20 |
Sink #%u
State: %s
Name: %s
Description: %s
Driver: %s
Sample Specification: %s
Channel Map: %s
Owner Module: %u
Mute: %s
Volume: %s
balance %0.2f
Base Volume: %s
Monitor Source: %s
Latency: %0.0f usec, configured %0.0f usec
Flags: %s%s%s%s%s%s%s
Properties:
%s
|
|
406. |
Source #%u
State: %s
Name: %s
Description: %s
Driver: %s
Sample Specification: %s
Channel Map: %s
Owner Module: %u
Mute: %s
Volume: %s
balance %0.2f
Base Volume: %s
Monitor of Sink: %s
Latency: %0.0f usec, configured %0.0f usec
Flags: %s%s%s%s%s%s
Properties:
%s
|
|
2015-05-20 |
Source #%u
State: %s
Name: %s
Description: %s
Driver: %s
Sample Specification: %s
Channel Map: %s
Owner Module: %u
Mute: %s
Volume: %s
balance %0.2f
Base Volume: %s
Monitor of Sink: %s
Latency: %0.0f usec, configured %0.0f usec
Flags: %s%s%s%s%s%s
Properties:
%s
|
|
419. |
Sink Input #%u
Driver: %s
Owner Module: %s
Client: %s
Sink: %u
Sample Specification: %s
Channel Map: %s
Format: %s
Corked: %s
Mute: %s
Volume: %s
balance %0.2f
Buffer Latency: %0.0f usec
Sink Latency: %0.0f usec
Resample method: %s
Properties:
%s
|
|
2015-05-20 |
Sink Input #%u
Driver: %s
Owner Module: %s
Client: %s
Sink: %u
Sample Specification: %s
Channel Map: %s
Format: %s
Corked: %s
Mute: %s
Volume: %s
balance %0.2f
Buffer Latency: %0.0f usec
Sink Latency: %0.0f usec
Resample method: %s
Properties:
%s
|
|
421. |
Source Output #%u
Driver: %s
Owner Module: %s
Client: %s
Source: %u
Sample Specification: %s
Channel Map: %s
Format: %s
Corked: %s
Mute: %s
Volume: %s
balance %0.2f
Buffer Latency: %0.0f usec
Source Latency: %0.0f usec
Resample method: %s
Properties:
%s
|
|
2015-05-20 |
Source Output #%u
Driver: %s
Owner Module: %s
Client: %s
Source: %u
Sample Specification: %s
Channel Map: %s
Format: %s
Corked: %s
Mute: %s
Volume: %s
balance %0.2f
Buffer Latency: %0.0f usec
Source Latency: %0.0f usec
Resample method: %s
Properties:
%s
|