Browsing Hawaiian translation

16.

PURPOSE:
This test will check that headphones connector works correctly
STEPS:
1. Connect a pair of headphones to your audio device
2. Click the Test button to play a sound to your audio device
VERIFICATION:
Did you hear a sound through the headphones and did the sound play without any distortion, clicks or other strange noises from your headphones?

17.

PURPOSE:
This test will check that recording sound using the onboard microphone works correctly
STEPS:
1. Disconnect any external microphones that you have plugged in
2. Click "Test", then speak into your internal microphone
3. After a few seconds, your speech will be played back to you.
VERIFICATION:
Did you hear your speech played back?

18.

PURPOSE:
This test will check that recording sound using an external microphone works correctly
STEPS:
1. Connect a microphone to your microphone port
2. Click "Test", then speak into the external microphone
3. After a few seconds, your speech will be played back to you
VERIFICATION:
Did you hear your speech played back?

19.

PURPOSE:
This test will check that a USB audio device works correctly
STEPS:
1. Connect a USB audio device to your system
2. Click "Test", then speak into the microphone
3. After a few seconds, your speech will be played back to you
VERIFICATION:
Did you hear your speech played back through the USB headphones?

20.

Play back a sound on the default output and listen for it on the default input.

21.

Collect audio-related system information. This data can be used to simulate this computer's audio subsystem and perform more detailed tests under a controlled environment.

22.

Attaches the audio hardware data collection log to the results.

23.

PURPOSE:
Check that the various audio channels are working properly
STEPS:
1. Click the Test button
VERIFICATION:
You should clearly hear a voice from the different audio channels

24.

This test will verify that the volume levels are at an acceptable level on your local system. The test will validate that the volume is greater than or equal to minvol and less than or equal to maxvol for all sources (inputs) and sinks (outputs) recognized by PulseAudio. It will also validate that the active source and sink are not muted. You should not manually adjust the volume or mute before running this test.

25.

PURPOSE:
Check that external line out connection works correctly
STEPS:
1. Insert cable to speakers (with built-in amplifiers) on the line out port
2. Open system sound preferences, 'Output' tab, select 'Line-out' on the connector list. Click the Test button
3. On the system sound preferences, select 'Internal Audio' on the device list and click 'Test Speakers' to check left and right channel
VERIFICATION:
1. Do you hear a sound in the speakers? The internal speakers should *not* be muted automatically
2. Do you hear the sound coming out on the corresponding channel?