Browsing Occitan (post 1500) translation

11.

Test your system and submit results to Launchpad

15.

PURPOSE:
DisplayPort audio interface verification
STEPS:
1. Plug an external DisplayPort device with sound (Use only one HDMI/DisplayPort interface at a time for this test)
2. Click the Test button
VERIFICATION:
Did you hear the sound from the DisplayPort device?

25.

PURPOSE:
Check that external line out connection works correctly
STEPS:
1. Insert cable to speakers (with built-in amplifiers) on the line out port
2. Open system sound preferences, 'Output' tab, select 'Line-out' on the connector list. Click the Test button
3. On the system sound preferences, select 'Internal Audio' on the device list and click 'Test Speakers' to check left and right channel
VERIFICATION:
1. Do you hear a sound in the speakers? The internal speakers should *not* be muted automatically
2. Do you hear the sound coming out on the corresponding channel?

26.

PURPOSE:
Check that external line in connection works correctly
STEPS:
1. Use a cable to connect the line in port to an external line out source.
2. Open system sound preferences, 'Input' tab, select 'Line-in' on the connector list. Click the Test button
3. After a few seconds, your recording will be played back to you.
VERIFICATION:
Did you hear your recording?

27.

PURPOSE:
Check that balance control works correctly on internal speakers
STEPS:
1. Check that moving the balance slider from left to right works smoothly
2. Click the Test button to play an audio tone for 10 seconds.
3. Move the balance slider from left to right and back.
4. Check that actual speaker audio balance follows your setting.
VERIFICATION:
Does the slider move smoothly, as well as being followed by the setting by the actual audio output?

28.

PURPOSE:
Check that balance control works correctly on external headphone
STEPS:
1. Check that moving the balance slider from left to right works smoothly
2. Click the Test button to play an audio tone for 10 seconds.
3. Move the balance slider from left to right and back.
4. Check that actual headphone audio balance follows your setting.
VERIFICATION:
Does the slider move smoothly, as well as being followed by the setting by the actual audio output?

71.

PURPOSE:
This test will check that you can use a BlueTooth HID device
STEPS:
1. Enable either a BT mouse or keyboard
2. Click on the bluetooth icon in the menu bar
3. Select 'Setup new device'
4. Look for the device in the list and select it
5. For mice, perform actions such as moving the pointer, right and left button clicks and double clicks
6. For keyboards, click the Test button to lauch a small tool. Enter some text into the tool and close it.
VERIFICATION:
Did the device work as expected?

74.

PURPOSE:
This test will check that the built-in camera works
STEPS:
1. Click on Test to display a still image from the camera for ten seconds.
VERIFICATION:
Did you see the image?

76.

PURPOSE:
This test will verify your system's ability to play Ogg Vorbis audio files.
STEPS:
1. Click Test to play an Ogg Vorbis file (.ogg)
2. Please close the player to proceed.
VERIFICATION:
Did the sample play correctly?

102.

Some new hard drives include a feature that parks the drive heads after a short period of inactivity. This is a power-saving feature, but it can have a bad interaction with the operating system that results in the drive constantly parked then activated. This produces excess wear on the drive, potentially leading to early failures.