Browsing Chinese (Simplified) translation

Don't show this notice anymore
Before translating, be sure to go through Ubuntu Translators instructions and Chinese (Simplified) guidelines.

These translations are shared with Checkbox trunk series template checkbox.

97106 of 678 results
97.
PURPOSE:
This will verify that an ExpressCard slot can detect inserted devices.
If you do not have an ExpressCard slot, please skip test.
STEPS:
1. Plug an ExpressCard device into the ExpressCard slot
VERIFICATION:
Was the device correctly detected?
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
(no translation yet)
Located in ../jobs/expresscard.txt.in:3
98.
PURPOSE:
This test will verify that a fingerprint reader will work properly for logging into your system.
PREREQUISITES:
This test case assumes that there's a testing account from which test cases are run and a personal account that the tester uses to verify the fingerprint reader
STEPS:
1. Click on the User indicator on the left side of the panel (your user name).
2. Select "Switch User Account"
3. On the LightDM screen select your username.
4. Use the fingerprint reader to login.
5. Click on the user switcher applet.
6. Select the testing account to continue running tests.
VERIFICATION:
Did the authentication procedure work correctly?
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
(no translation yet)
Located in ../jobs/fingerprint.txt.in:3
99.
PURPOSE:
This test will verify that a fingerprint reader can be used to unlock a locked system.
STEPS:
1. Click on the Session indicator (Cog icon on the Left side of the panel) .
2. Select 'Lock screen'.
3. Press any key or move the mouse.
4. A window should appear that provides the ability to unlock either typing your password or using fingerprint authentication.
5. Use the fingerprint reader to unlock.
6. Your screen should be unlocked.
VERIFICATION:
Did the authentication procedure work correctly?
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
目的:
此测试将验证指纹阅读器可以用来解锁被锁定的系统。
步骤:
1. 单击会话指示器(面板右侧的锯齿图标)。
2. 选择 “锁定屏幕”
3. 按下任意键或移动鼠标。
4. 解锁窗口将弹出,可以通过输入您的密码或者使用指纹认证解锁。
5. 使用指纹阅读器解锁。
6. 您的屏幕应该被解锁。
验证:
认证过程是否正常工作。
Translated by YunQiang Su on 2016-04-15
Located in ../jobs/fingerprint.txt.in:18
100.
PURPOSE:
This test will check the system can detect the insertion of a FireWire HDD
STEPS:
1. Click 'Test' to begin the test. This test will
timeout and fail if the insertion has not been detected within 20 seconds.
2. Plug a FireWire HDD into an available FireWire port.
VERIFICATION:
The verification of this test is automated. Do not change the automatically
selected result
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
目的:
此测试将检查您的系统是否能够检测到 FireWire HDD 被插入
步骤:
1. 单击 “测试” 开始测试。
如插入 FireWire HDD 在 20 秒内未被检测到,此测试将超时。
2. 将FireWire HDD 插入一个可用的 FireWire 端口。
验证:
此测试的验证自动进行。
不要更改自动选择的结果。
Translated by YunQiang Su on 2016-04-15
Located in ../jobs/firewire.txt.in:4
101.
This is an automated test which performs read/write operations on an attached FireWire HDD
description
这是一个在已连接的 FireWire HDD 上执行读/写操作的自动测试
Translated by YunQiang Su on 2012-04-13
Located in ../jobs/firewire.txt.in:20
102.
PURPOSE:
This test will check the system can detect the removal of a FireWire HDD
STEPS:
1. Click 'Test' to begin the test. This test will timeout and fail if
the removal has not been detected within 20 seconds.
2. Remove the previously attached FireWire HDD from the FireWire port.
VERIFICATION:
The verification of this test is automated. Do not change the automatically
selected result
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
目的:
此测试将检查您的系统是否能够检测到 FireWire HDD 被移除
步骤:
1. 单击 “测试” 开始测试。
如移除 FireWire HDD 在 20 秒内未被检测到,此测试将超时。
2. 将 FireWire HDD 从原先插入的 FireWire 端口上移除。
验证:
此测试的验证自动进行。
不要更改自动选择的结果。
Translated by YunQiang Su on 2016-04-15
Located in ../jobs/firewire.txt.in:28
103.
Floppy test
description
软盘测试
Translated by YunQiang Su on 2012-04-13
Located in ../jobs/floppy.txt.in:4
104.
Parses Xorg.0.Log and discovers the running X driver and version
description
解析 Xorg.0.Log 并发现正在运行的 X 驱动和版本
Translated by YunQiang Su on 2016-04-15
Located in ../jobs/graphics.txt.in:5
105.
Test to output the Xorg version
description
输出 Xorg 版本的测试
Translated by YunQiang Su on 2012-04-13
Located in ../jobs/graphics.txt.in:12
106.
PURPOSE:
This test will verify that the GUI is usable after manually changing resolution
STEPS:
1. Open the Displays application
2. Select a new resolution from the dropdown list
3. Click on Apply
4. Select the original resolution from the dropdown list
5. Click on Apply
VERIFICATION:
Did the resolution change as expected?
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
目的:
此测试将验证在手动更改分辨率后,GUI 是否可用
步骤:
1. 打开 “显示” 应用程序
2. 从下拉列表中选择一个新的分辨率
3. 单击 “应用”
4. 从下拉列表中选择原始分辨率
5. 单击 “应用”
验证:
分辨率是否如希望地改变?
Translated by YunQiang Su on 2016-04-15
In upstream:
目的:
此测试将验证在手动更改分辨率后,GUI 是否可用
步骤:
1. 打开 "显示" 应用程序
2. 从下拉列表中选择一个新的分辨率
3. 单击 "应用"
4. 从下拉列表中选择原始分辨率
5. 单击 "应用"
验证:
分辨率是否正常改变?
Suggested by YunQiang Su on 2012-04-13
Located in ../jobs/graphics.txt.in:17
97106 of 678 results

This translation is managed by Ubuntu Simplified Chinese Translators, assigned by Ubuntu Translators.

You are not logged in. Please log in to work on translations.

Contributors to this translation: Aron Xu, Azrael Green, Careone, Carlos Gong, Dingyuan Wang, Fenghua Wang, Guanglin Du, HarryCheng, Heling Yao, Jimmy Xu, John Lu, Lele Long, Lephix, Litsbu Young, Luo Lei, Ma Jun, Qianqian Fang, Qiu Haoyu, Robin Lee, Roy, Tao Wei, Wbx20000, Wenzhen.du, Wylmer Wang, Xiaoyao, YunQiang Su, huangzhongbo, ichaochao, jiaowen520li, liz, luctoy, peaceman, prongs, qin_sx, 朱涛.