Browsing Turkish translation

217.

bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next

218.

bgp_search: LOOP: psi (%d) == storage[psi].bucket_next

325.

pretty-printing mode ignored in interactive shells

523.

Execute shell builtins.

Execute SHELL-BUILTIN with arguments ARGs without performing command
lookup. This is useful when you wish to reimplement a shell builtin
as a shell function, but need to execute the builtin within the function.

Exit Status:
Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is
not a shell builtin.

531.

Set variable values and attributes.

Declare variables and give them attributes. If no NAMEs are given,
display the attributes and values of all variables.

Options:
-f[tab]restrict action or display to function names and definitions
-F[tab]restrict display to function names only (plus line number and
[tab][tab]source file when debugging)
-g[tab]create global variables when used in a shell function; otherwise
[tab][tab]ignored
-I[tab]if creating a local variable, inherit the attributes and value
[tab][tab]of a variable with the same name at a previous scope
-p[tab]display the attributes and value of each NAME

Options which set attributes:
-a[tab]to make NAMEs indexed arrays (if supported)
-A[tab]to make NAMEs associative arrays (if supported)
-i[tab]to make NAMEs have the `integer' attribute
-l[tab]to convert the value of each NAME to lower case on assignment
-n[tab]make NAME a reference to the variable named by its value
-r[tab]to make NAMEs readonly
-t[tab]to make NAMEs have the `trace' attribute
-u[tab]to convert the value of each NAME to upper case on assignment
-x[tab]to make NAMEs export

Using `+' instead of `-' turns off the given attribute.

Variables with the integer attribute have arithmetic evaluation (see
the `let' command) performed when the variable is assigned a value.

When used in a function, `declare' makes NAMEs local, as with the `local'
command. The `-g' option suppresses this behavior.

Exit Status:
Returns success unless an invalid option is supplied or a variable
assignment error occurs.

534.

Write arguments to the standard output.

Display the ARGs, separated by a single space character and followed by a
newline, on the standard output.

Options:
-n[tab]do not append a newline
-e[tab]enable interpretation of the following backslash escapes
-E[tab]explicitly suppress interpretation of backslash escapes

`echo' interprets the following backslash-escaped characters:
\a[tab]alert (bell)
\b[tab]backspace
\c[tab]suppress further output
\e[tab]escape character
\E[tab]escape character
\f[tab]form feed
\n[tab]new line
\r[tab]carriage return
\t[tab]horizontal tab
\v[tab]vertical tab
\\[tab]backslash
\0nnn[tab]the character whose ASCII code is NNN (octal). NNN can be
[tab][tab]0 to 3 octal digits
\xHH[tab]the eight-bit character whose value is HH (hexadecimal). HH
[tab][tab]can be one or two hex digits
\uHHHH[tab]the Unicode character whose value is the hexadecimal value HHHH.
[tab][tab]HHHH can be one to four hex digits.
\UHHHHHHHH the Unicode character whose value is the hexadecimal value
[tab][tab]HHHHHHHH. HHHHHHHH can be one to eight hex digits.

Exit Status:
Returns success unless a write error occurs.

538.

Parse option arguments.

Getopts is used by shell procedures to parse positional parameters
as options.

OPTSTRING contains the option letters to be recognized; if a letter
is followed by a colon, the option is expected to have an argument,
which should be separated from it by white space.

Each time it is invoked, getopts will place the next option in the
shell variable $name, initializing name if it does not exist, and
the index of the next argument to be processed into the shell
variable OPTIND. OPTIND is initialized to 1 each time the shell or
a shell script is invoked. When an option requires an argument,
getopts places that argument into the shell variable OPTARG.

getopts reports errors in one of two ways. If the first character
of OPTSTRING is a colon, getopts uses silent error reporting. In
this mode, no error messages are printed. If an invalid option is
seen, getopts places the option character found into OPTARG. If a
required argument is not found, getopts places a ':' into NAME and
sets OPTARG to the option character found. If getopts is not in
silent mode, and an invalid option is seen, getopts places '?' into
NAME and unsets OPTARG. If a required argument is not found, a '?'
is placed in NAME, OPTARG is unset, and a diagnostic message is
printed.

If the shell variable OPTERR has the value 0, getopts disables the
printing of error messages, even if the first character of
OPTSTRING is not a colon. OPTERR has the value 1 by default.

Getopts normally parses the positional parameters, but if arguments
are supplied as ARG values, they are parsed instead.

Exit Status:
Returns success if an option is found; fails if the end of options is
encountered or an error occurs.

546.

Display information about builtin commands.

Displays brief summaries of builtin commands. If PATTERN is
specified, gives detailed help on all commands matching PATTERN,
otherwise the list of help topics is printed.

Options:
-d[tab]output short description for each topic
-m[tab]display usage in pseudo-manpage format
-s[tab]output only a short usage synopsis for each topic matching
[tab][tab]PATTERN

Arguments:
PATTERN[tab]Pattern specifying a help topic

Exit Status:
Returns success unless PATTERN is not found or an invalid option is given.

547.

Display or manipulate the history list.

Display the history list with line numbers, prefixing each modified
entry with a `*'. An argument of N lists only the last N entries.

Options:
-c[tab]clear the history list by deleting all of the entries
-d offset[tab]delete the history entry at position OFFSET. Negative
[tab][tab]offsets count back from the end of the history list

-a[tab]append history lines from this session to the history file
-n[tab]read all history lines not already read from the history file
[tab][tab]and append them to the history list
-r[tab]read the history file and append the contents to the history
[tab][tab]list
-w[tab]write the current history to the history file

-p[tab]perform history expansion on each ARG and display the result
[tab][tab]without storing it in the history list
-s[tab]append the ARGs to the history list as a single entry

If FILENAME is given, it is used as the history file. Otherwise,
if HISTFILE has a value, that is used, else ~/.bash_history.

If the HISTTIMEFORMAT variable is set and not null, its value is used
as a format string for strftime(3) to print the time stamp associated
with each displayed history entry. No time stamps are printed otherwise.

Exit Status:
Returns success unless an invalid option is given or an error occurs.

552.

Read a line from the standard input and split it into fields.

Reads a single line from the standard input, or from file descriptor FD
if the -u option is supplied. The line is split into fields as with word
splitting, and the first word is assigned to the first NAME, the second
word to the second NAME, and so on, with any leftover words assigned to
the last NAME. Only the characters found in $IFS are recognized as word
delimiters.

If no NAMEs are supplied, the line read is stored in the REPLY variable.

Options:
-a array[tab]assign the words read to sequential indices of the array
[tab][tab]variable ARRAY, starting at zero
-d delim[tab]continue until the first character of DELIM is read, rather
[tab][tab]than newline
-e[tab]use Readline to obtain the line
-i text[tab]use TEXT as the initial text for Readline
-n nchars[tab]return after reading NCHARS characters rather than waiting
[tab][tab]for a newline, but honor a delimiter if fewer than
[tab][tab]NCHARS characters are read before the delimiter
-N nchars[tab]return only after reading exactly NCHARS characters, unless
[tab][tab]EOF is encountered or read times out, ignoring any
[tab][tab]delimiter
-p prompt[tab]output the string PROMPT without a trailing newline before
[tab][tab]attempting to read
-r[tab]do not allow backslashes to escape any characters
-s[tab]do not echo input coming from a terminal
-t timeout[tab]time out and return failure if a complete line of
[tab][tab]input is not read within TIMEOUT seconds. The value of the
[tab][tab]TMOUT variable is the default timeout. TIMEOUT may be a
[tab][tab]fractional number. If TIMEOUT is 0, read returns
[tab][tab]immediately, without trying to read any data, returning
[tab][tab]success only if input is available on the specified
[tab][tab]file descriptor. The exit status is greater than 128
[tab][tab]if the timeout is exceeded
-u fd[tab]read from file descriptor FD instead of the standard input

Exit Status:
The return code is zero, unless end-of-file is encountered, read times out
(in which case it's greater than 128), a variable assignment error occurs,
or an invalid file descriptor is supplied as the argument to -u.