Browsing Chinese (Simplified) translation

Don't show this notice anymore
Before translating, be sure to go through Ubuntu Translators instructions and Chinese (Simplified) guidelines.
198207 of 362 results
198.
Search Command Help Text

Enter the words or characters you would like to search for, and then press Enter. If there is a match for the text you entered, the screen will be updated to the location of the nearest match for the search string.

The previous search string will be shown in brackets after the search prompt. Hitting Enter without entering any text will perform the previous search.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
搜索命令辅助说明

首先输入您想要搜索的字串或字符,然后按下输入键 (Enter)。如果存在着 符合您所输入的文字,画面就会更新到最合乎搜索字串的位置。

前次搜索的字串将会显示在 搜索: 提示符号后面的括号中。不输入任何文字 而直接按下输入键则会履行前次的搜索。
Translated and reviewed by LI Daobing on 2007-03-16
Shared:
搜索命令辅助说明

首先输入您想要搜索的字符串或字符,然后按下回车键。如果存在着符合您所输入的文字,画面就会更新到最合乎搜索字符串的位置。

最近一次搜索的字符串将会显示在搜索提示符后的括号中。不输入任何文字而直接按下回车键则会重复使用最近一次的搜索条件。
Suggested by Aron Xu on 2009-11-17
Located in src/help.c:54
199.
If you have selected text with the mark and then search to replace, only matches in the selected text will be replaced.

The following function keys are available in Search mode:

There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
如果您已经用标记选择了一段文字 并进行搜索替换,就只有在选择文字中符合者将会被替换。

以下的功能键可用于搜索模式:

Translated and reviewed by LI Daobing on 2007-03-16
Shared:
如果您已经用标记选择了一段文字并进行搜索替换,就只有在选择文字中符合者将会被替换。

以下的功能键可用于搜索模式:

Suggested by Aron Xu on 2009-11-17
Located in src/help.c:63
200.
Go To Line Help Text

Enter the line number that you wish to go to and hit Enter. If there are fewer lines of text than the number you entered, you will be brought to the last line of the file.

The following function keys are available in Go To Line mode:

There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
跳行辅助说明

首先输入您想去的行数编号并按下输入键 (Enter)。如果文章中的行数比您所输 入要少,您将会被带至文件的最后一行。

以下的功能键可用于跳行模式:

Translated and reviewed by LI Daobing on 2007-03-16
Shared:
跳行辅助说明

首先输入您想去的行数编号并按下回车键。如果文章中的行数比您所输入少,您将会被带至文件的最后一行。

以下的功能键可用于跳行模式:

Suggested by Aron Xu on 2009-11-17
Located in src/help.c:69
201.
Insert File Help Text

Type in the name of a file to be inserted into the current file buffer at the current cursor location.

If you have compiled nano with multiple file buffer support, and enable multiple file buffers with the -F or --multibuffer command line flags, the Meta-F toggle, or a nanorc file, inserting a file will cause it to be loaded into a separate buffer (use Meta-< and > to switch between file buffers).
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
插入文件辅助说明

先把文件的名称键入,它将会插入在目前缓冲区的游标所在之处。

如果您所编译的 nano 支持多重文件缓冲区,并且将此功能以命令列旗标 -F 或 --multibuffer、Meta-F 开关,或者 nanorc 文件来启动的话,所插入的文件 将会被载入另外的缓冲区中 (利用 Meta-< 和 > 在文件缓冲区间切换)。
Translated and reviewed by LI Daobing on 2007-03-16
Shared:
插入文件辅助说明

先把文件的名称键入,它将会插入在当前缓冲区的游标所在之处。

如果您所编译的 nano 支持多重文件缓冲区,并且将此功能以命令列旗标-F 或--multibuffer、Meta-F 开关,或者 nanorc 文件来启动的话,所插入的文件 将会被载入另外的缓冲区中 (利用 Meta-< 和 > 在文件缓冲区间切换)。
Suggested by Aron Xu on 2009-11-17
Located in src/help.c:78
202.
If you need another blank buffer, do not enter any filename, or type in a nonexistent filename at the prompt and press Enter.

The following function keys are available in Insert File mode:

There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
如果您需要另一个空的缓冲区,那就不要输入任何档名,或是在提示符号后键 入一个不存在的档名,然后按下输入键。

以下的功能键可用于插入文件模式:

Translated and reviewed by LI Daobing on 2007-03-16
Shared:
如果您需要另一个空的缓冲区,那就不要输入任何文件名,或是在提示符号后键入一个不存在的文件名,然后按下回车键。

以下的功能键可用于插入文件模式:

Suggested by Aron Xu on 2009-11-17
Located in src/help.c:87
203.
Write File Help Text

Type the name that you wish to save the current file as and press Enter to save the file.

If you have selected text with the mark, you will be prompted to save only the selected portion to a separate file. To reduce the chance of overwriting the current file with just a portion of it, the current filename is not the default in this mode.

The following function keys are available in Write File mode:

There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
写入文件辅助说明

先键入您想要以此来储存目前文件的名称,并按下输入键来储存文件。

如果已经用标记选择了文字,那么您将会被提示,只储存标记部份到另外的档 案。为了降低目前文件只被其中部份覆写的机会,在此模式下,目前的档名不会 成为预设值。

以下的功能键可用于写入文件模式:

Translated and reviewed by LI Daobing on 2007-03-16
Shared:
写入文件辅助说明

先键入您想要以此来储存当前文件的名称,并按下回车键来储存文件。

如果已经用标记选择了文字,那么您将会被提示,只储存标记部份到另外的档案。为了降低当前文件只被其中部份覆盖的机会,在此模式下,当前的文件名不会成为默认值。

以下的功能键可用于写入文件模式:

Suggested by Aron Xu on 2009-11-17
Located in src/help.c:93
204.
File Browser Help Text

The file browser is used to visually browse the directory structure to select a file for reading or writing. You may use the arrow keys or Page Up/Down to browse through the files, and S or Enter to choose the selected file or enter the selected directory. To move up one level, select the directory called ".." at the top of the file list.

The following function keys are available in the file browser:

There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
文件选单辅助说明

文件选单是用来视觉化浏览目录结构,以选取要读出或写入的文件。您可以 使用上下左右键或上页/下页来浏览,并用 S 或输入键来选取所要的文件或者 进入所选的目录。要跳到上层时,选择在文件列表顶端名为 ".." 的目录。

以下的功能键可用于文件选单:

Translated and reviewed by LI Daobing on 2007-03-16
Shared:
文件选单辅助说明

文件选单是用来视觉化浏览目录结构,以选取要读出或写入的文件。您可以 使用上下左右键或上页/下页来浏览,并用S 或回车键来选取所要的文件或者进入所选的目录。要跳到上层时,选择在文件列表顶端名为 ".." 的目录。

以下的功能键可用于文件选单:

Suggested by Aron Xu on 2009-11-17
Located in src/help.c:107
205.
Browser Search Command Help Text

Enter the words or characters you would like to search for, and then press Enter. If there is a match for the text you entered, the screen will be updated to the location of the nearest match for the search string.

The previous search string will be shown in brackets after the search prompt. Hitting Enter without entering any text will perform the previous search.

There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
搜索命令辅助说明

首先输入您想要搜索的字串或字符,然后按下输入键 (Enter)。如果存在著 符合您所输入的文字,画面就会更新到最合乎搜索字串的位置。

前次搜索的字串将会显示在 搜索: 提示符号后面的括号中。不输入任何文字 而直接按下输入键则会履行前次的搜索。

Translated and reviewed by LI Daobing on 2007-03-16
Shared:
搜索命令辅助说明

首先输入您想要搜索的字符串或字符,然后按下回车键。如果存在著 符合您所输入的文字,画面就会更新到最合乎搜索字符串的位置。

最近一次搜索的字符串将会显示在搜索提示符号后面的括号中。不输入任何文字而直接按下回车键则会重复最近一次的搜索条件。

Suggested by Aron Xu on 2009-11-17
Located in src/help.c:120
206.
The following function keys are available in Browser Search mode:

There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
在搜索模式可使用如下的功能键:

Translated and reviewed by LI Daobing on 2007-03-16
Shared:
在搜索模式可使用如下的功能键:

Suggested by Aron Xu on 2009-11-17
Located in src/help.c:129
207.
Browser Go To Directory Help Text

Enter the name of the directory you would like to browse to.

If tab completion has not been disabled, you can use the Tab key to (attempt to) automatically complete the directory name.

The following function keys are available in Browser Go To Directory mode:

There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
跳至目录辅助说明

先输入您想要浏览的目录名称。

如果跳格补正的功能没有被关闭,您可以利用跳格键 (TAB) 去 (尝试) 自动 补正目录名称。

以下的功能键可用于跳至目录模式:

Translated and reviewed by LI Daobing on 2007-03-16
Shared:
跳至目录辅助说明

先输入您想要浏览的目录名称。

如果制表符补全的功能没有被关闭,您可以利用制表符(尝试)自动补全目录名称。

以下的功能键可用于跳至目录模式:

Suggested by Aron Xu on 2009-11-17
Located in src/help.c:133
198207 of 362 results

This translation is managed by Ubuntu Simplified Chinese Translators, assigned by Ubuntu Translators.

You are not logged in. Please log in to work on translations.

Contributors to this translation: Aron Xu, Boyuan Yang, Feng Chao, LI Daobing, Lyricz, eexpress.