Browsing Swedish translation

49.

Usage: nmcli connection add { ARGUMENTS | help }

ARGUMENTS := COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS SLAVE_OPTIONS IP_OPTIONS [-- ([+|-]<setting>.<property> <value>)+]

COMMON_OPTIONS:
type <type>
ifname <interface name> | "*"
[con-name <connection name>]
[autoconnect yes|no]
[save yes|no]
[master <master (ifname, or connection UUID or name)>]
[slave-type <master connection type>]

TYPE_SPECIFIC_OPTIONS:
ethernet: [mac <MAC address>]
[cloned-mac <cloned MAC address>]
[mtu <MTU>]

wifi: ssid <SSID>
[mac <MAC address>]
[cloned-mac <cloned MAC address>]
[mtu <MTU>]
[mode infrastructure|ap|adhoc]

wimax: [mac <MAC address>]
[nsp <NSP>]

pppoe: username <PPPoE username>
[password <PPPoE password>]
[service <PPPoE service name>]
[mtu <MTU>]
[mac <MAC address>]

gsm: apn <APN>
[user <username>]
[password <password>]

cdma: [user <username>]
[password <password>]

infiniband: [mac <MAC address>]
[mtu <MTU>]
[transport-mode datagram | connected]
[parent <ifname>]
[p-key <IPoIB P_Key>]

bluetooth: [addr <bluetooth address>]
[bt-type panu|nap|dun-gsm|dun-cdma]

vlan: dev <parent device (connection UUID, ifname, or MAC)>
id <VLAN ID>
[flags <VLAN flags>]
[ingress <ingress priority mapping>]
[egress <egress priority mapping>]
[mtu <MTU>]

bond: [mode balance-rr (0) | active-backup (1) | balance-xor (2) | broadcast (3) |
802.3ad (4) | balance-tlb (5) | balance-alb (6)]
[primary <ifname>]
[miimon <num>]
[downdelay <num>]
[updelay <num>]
[arp-interval <num>]
[arp-ip-target <num>]
[lacp-rate slow (0) | fast (1)]

bond-slave: master <master (ifname, or connection UUID or name)>

team: [config <file>|<raw JSON data>]

team-slave: master <master (ifname, or connection UUID or name)>
[config <file>|<raw JSON data>]

bridge: [stp yes|no]
[priority <num>]
[forward-delay <2-30>]
[hello-time <1-10>]
[max-age <6-40>]
[ageing-time <0-1000000>]
[multicast-snooping yes|no]
[mac <MAC address>]

bridge-slave: master <master (ifname, or connection UUID or name)>
[priority <0-63>]
[path-cost <1-65535>]
[hairpin yes|no]

vpn: vpn-type vpnc|openvpn|pptp|openconnect|openswan|libreswan|ssh|l2tp|iodine|...
[user <username>]

olpc-mesh: ssid <SSID>
[channel <1-13>]
[dhcp-anycast <MAC address>]

adsl: username <username>
protocol pppoa|pppoe|ipoatm
[password <password>]
[encapsulation vcmux|llc]

tun: mode tun|tap
[owner <UID>]
[group <GID>]
[pi yes|no]
[vnet-hdr yes|no]
[multi-queue yes|no]

ip-tunnel: mode ipip|gre|sit|isatap|vti|ip6ip6|ipip6|ip6gre|vti6
remote <remote endpoint IP>
[local <local endpoint IP>]
[dev <parent device (ifname or connection UUID)>]

macsec: dev <parent device (connection UUID, ifname, or MAC)>
mode <psk|eap>
[cak <key> ckn <key>]
[encrypt yes|no]
[port 1-65534]


macvlan: dev <parent device (connection UUID, ifname, or MAC)>
mode vepa|bridge|private|passthru|source
[tap yes|no]

vxlan: id <VXLAN ID>
remote <IP of multicast group or remote address>
[local <source IP>]
[dev <parent device (ifname or connection UUID)>]
[source-port-min <0-65535>]
[source-port-max <0-65535>]
[destination-port <0-65535>]

wpan: [short-addr <0x0000-0xffff>]
[pan-id <0x0000-0xffff>]
[page <default|0-31>]
[channel <default|0-26>]
[mac <MAC address>]

6lowpan: dev <parent device (connection UUID, ifname, or MAC)>
dummy:

SLAVE_OPTIONS:
bridge: [priority <0-63>]
[path-cost <1-65535>]
[hairpin yes|no]

team: [config <file>|<raw JSON data>]

IP_OPTIONS:
[ip4 <IPv4 address>] [gw4 <IPv4 gateway>]
[ip6 <IPv6 address>] [gw6 <IPv6 gateway>]

106.

Error: failed to %s %s.%s: %s.

261.

Usage: nmcli device { COMMAND | help }

COMMAND := { status | show | set | connect | reapply | modify | disconnect | delete | monitor | wifi | lldp }

status

show [<ifname>]

set [ifname] <ifname> [autoconnect yes|no] [managed yes|no]

connect <ifname>

reapply <ifname>

modify <ifname> ([+|-]<setting>.<property> <value>)+

disconnect <ifname> ...

delete <ifname> ...

monitor <ifname> ...

wifi [list [ifname <ifname>] [bssid <BSSID>] [--rescan yes|no|auto]]

wifi connect <(B)SSID> [password <password>] [wep-key-type key|phrase] [ifname <ifname>]
[bssid <BSSID>] [name <name>] [private yes|no] [hidden yes|no]

wifi hotspot [ifname <ifname>] [con-name <name>] [ssid <SSID>] [band a|bg] [channel <channel>] [password <password>]

wifi rescan [ifname <ifname>] [[ssid <SSID to scan>] ...]

wifi show-password [ifname <ifname>]

lldp [list [ifname <ifname>]]

369.

Usage: nmcli general reload { ARGUMENTS | help }

ARGUMENTS := [<flag>[,<flag>...]]

Reload NetworkManager's configuration and perform certain updates, like
flushing caches or rewriting external state to disk. This is similar to
sending SIGHUP to NetworkManager but it allows for more fine-grained
control over what to reload through the flags argument. It also allows
non-root access via PolicyKit and contrary to signals it is synchronous.

Available flags are:

'conf' Reload the NetworkManager.conf configuration from
disk. Note that this does not include connections, which
can be reloaded through 'nmcli connection reload' instead.

'dns-rc' Update DNS configuration, which usually involves writing
/etc/resolv.conf anew.

'dns-full' Restart the DNS plugin. This is for example useful when
using dnsmasq plugin, which uses additional configuration
in /etc/NetworkManager/dnsmasq.d. If you edit those files,
you can restart the DNS plugin. This action shortly
interrupts name resolution.

With no flags, everything that is supported is reloaded, which is
identical to sending a SIGHUP.

428.

Usage: nmcli [OPTIONS] OBJECT { COMMAND | help }

OPTIONS
-a, --ask ask for missing parameters
-c, --colors auto|yes|no whether to use colors in output
-e, --escape yes|no escape columns separators in values
-f, --fields <field,...>|all|common specify fields to output
-g, --get-values <field,...>|all|common shortcut for -m tabular -t -f
-h, --help print this help
-m, --mode tabular|multiline output mode
-o, --overview overview mode
-p, --pretty pretty output
-s, --show-secrets allow displaying passwords
-t, --terse terse output
-v, --version show program version
-w, --wait <seconds> set timeout waiting for finishing operations

OBJECT
g[eneral] NetworkManager's general status and operations
n[etworking] overall networking control
r[adio] NetworkManager radio switches
c[onnection] NetworkManager's connections
d[evice] devices managed by NetworkManager
a[gent] NetworkManager secret agent or polkit agent
m[onitor] monitor NetworkManager changes

831.

The WireGuard config file must be a valid interface name followed by ".conf"

858.

Indicates whether Fast Initial Link Setup (802.11ai) must be enabled for the connection. One of NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_FILS_DISABLE (1) (disable FILS), NM_SETTING_WIRELESS_SECURITY_FILS_OPTIONAL (2) (enable FILS if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_FILS_REQUIRED (3) (enable FILS and fail if not supported). When set to NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) and no global default is set, FILS will be optionally enabled.

860.

Key management used for the connection. One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-psk" (infrastructure WPA-PSK), "sae" (SAE) or "wpa-eap" (WPA-Enterprise). This property must be set for any Wi-Fi connection that uses security.

901.

Specifies the allowed "phase 2" inner non-EAP authentication method when an EAP method that uses an inner TLS tunnel is specified in the "eap" property. Recognized non-EAP "phase 2" methods are "pap", "chap", "mschap", "mschapv2", "gtc", "otp", "md5", and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.

902.

Specifies the allowed "phase 2" inner EAP-based authentication method when an EAP method that uses an inner TLS tunnel is specified in the "eap" property. Recognized EAP-based "phase 2" methods are "md5", "mschapv2", "otp", "gtc", and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.