Browsing Swedish translation

47.

Usage: nmcli connection add { ARGUMENTS | help }

ARGUMENTS := COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS SLAVE_OPTIONS IP_OPTIONS [-- ([+|-]<setting>.<property> <value>)+]

COMMON_OPTIONS:
type <type>
ifname <interface name> | "*"
[con-name <connection name>]
[autoconnect yes|no]
[save yes|no]
[master <master (ifname, or connection UUID or name)>]
[slave-type <master connection type>]

TYPE_SPECIFIC_OPTIONS:
ethernet: [mac <MAC address>]
[cloned-mac <cloned MAC address>]
[mtu <MTU>]

wifi: ssid <SSID>
[mac <MAC address>]
[cloned-mac <cloned MAC address>]
[mtu <MTU>]
[mode infrastructure|ap|adhoc]

wimax: [mac <MAC address>]
[nsp <NSP>]

pppoe: username <PPPoE username>
[password <PPPoE password>]
[service <PPPoE service name>]
[mtu <MTU>]
[mac <MAC address>]

gsm: apn <APN>
[user <username>]
[password <password>]

cdma: [user <username>]
[password <password>]

infiniband: [mac <MAC address>]
[mtu <MTU>]
[transport-mode datagram | connected]
[parent <ifname>]
[p-key <IPoIB P_Key>]

bluetooth: [addr <bluetooth address>]
[bt-type panu|nap|dun-gsm|dun-cdma]

vlan: dev <parent device (connection UUID, ifname, or MAC)>
id <VLAN ID>
[flags <VLAN flags>]
[ingress <ingress priority mapping>]
[egress <egress priority mapping>]
[mtu <MTU>]

bond: [mode balance-rr (0) | active-backup (1) | balance-xor (2) | broadcast (3) |
802.3ad (4) | balance-tlb (5) | balance-alb (6)]
[primary <ifname>]
[miimon <num>]
[downdelay <num>]
[updelay <num>]
[arp-interval <num>]
[arp-ip-target <num>]
[lacp-rate slow (0) | fast (1)]

bond-slave: master <master (ifname, or connection UUID or name)>

team: [config <file>|<raw JSON data>]

team-slave: master <master (ifname, or connection UUID or name)>
[config <file>|<raw JSON data>]

bridge: [stp yes|no]
[priority <num>]
[forward-delay <2-30>]
[hello-time <1-10>]
[max-age <6-40>]
[ageing-time <0-1000000>]
[multicast-snooping yes|no]
[mac <MAC address>]

bridge-slave: master <master (ifname, or connection UUID or name)>
[priority <0-63>]
[path-cost <1-65535>]
[hairpin yes|no]

vpn: vpn-type vpnc|openvpn|pptp|openconnect|openswan|libreswan|ssh|l2tp|iodine|...
[user <username>]

olpc-mesh: ssid <SSID>
[channel <1-13>]
[dhcp-anycast <MAC address>]

adsl: username <username>
protocol pppoa|pppoe|ipoatm
[password <password>]
[encapsulation vcmux|llc]

tun: mode tun|tap
[owner <UID>]
[group <GID>]
[pi yes|no]
[vnet-hdr yes|no]
[multi-queue yes|no]

ip-tunnel: mode ipip|gre|sit|isatap|vti|ip6ip6|ipip6|ip6gre|vti6
remote <remote endpoint IP>
[local <local endpoint IP>]
[dev <parent device (ifname or connection UUID)>]

macsec: dev <parent device (connection UUID, ifname, or MAC)>
mode <psk|eap>
[cak <key> ckn <key>]
[encrypt yes|no]
[port 1-65534]


macvlan: dev <parent device (connection UUID, ifname, or MAC)>
mode vepa|bridge|private|passthru|source
[tap yes|no]

vxlan: id <VXLAN ID>
remote <IP of multicast group or remote address>
[local <source IP>]
[dev <parent device (ifname or connection UUID)>]
[source-port-min <0-65535>]
[source-port-max <0-65535>]
[destination-port <0-65535>]

wpan: [short-addr <0x0000-0xffff>]
[pan-id <0x0000-0xffff>]
[page <default|0-31>]
[channel <default|0-26>]
[mac <MAC address>]

6lowpan: dev <parent device (connection UUID, ifname, or MAC)>
dummy:

SLAVE_OPTIONS:
bridge: [priority <0-63>]
[path-cost <1-65535>]
[hairpin yes|no]

team: [config <file>|<raw JSON data>]

IP_OPTIONS:
[ip4 <IPv4 address>] [gw4 <IPv4 gateway>]
[ip6 <IPv6 address>] [gw6 <IPv6 gateway>]

262.

Usage: nmcli device { COMMAND | help }

COMMAND := { status | show | set | connect | reapply | modify | disconnect | delete | monitor | wifi | lldp }

status

show [<ifname>]

set [ifname] <ifname> [autoconnect yes|no] [managed yes|no]

connect <ifname>

reapply <ifname>

modify <ifname> ([+|-]<setting>.<property> <value>)+

disconnect <ifname> ...

delete <ifname> ...

monitor <ifname> ...

wifi [list [ifname <ifname>] [bssid <BSSID>] [--rescan yes|no|auto]]

wifi connect <(B)SSID> [password <password>] [wep-key-type key|phrase] [ifname <ifname>]
[bssid <BSSID>] [name <name>] [private yes|no] [hidden yes|no]

wifi hotspot [ifname <ifname>] [con-name <name>] [ssid <SSID>] [band a|bg] [channel <channel>] [password <password>]

wifi rescan [ifname <ifname>] [[ssid <SSID to scan>] ...]

lldp [list [ifname <ifname>]]

418.

Usage: nmcli [OPTIONS] OBJECT { COMMAND | help }

OPTIONS
-a, --ask ask for missing parameters
-c, --colors auto|yes|no whether to use colors in output
-e, --escape yes|no escape columns separators in values
-f, --fields <field,...>|all|common specify fields to output
-g, --get-values <field,...>|all|common shortcut for -m tabular -t -f
-h, --help print this help
-m, --mode tabular|multiline output mode
-o, --overview overview mode
-p, --pretty pretty output
-s, --show-secrets allow displaying passwords
-t, --terse terse output
-v, --version show program version
-w, --wait <seconds> set timeout waiting for finishing operations

OBJECT
g[eneral] NetworkManager's general status and operations
n[etworking] overall networking control
r[adio] NetworkManager radio switches
c[onnection] NetworkManager's connections
d[evice] devices managed by NetworkManager
a[gent] NetworkManager secret agent or polkit agent
m[onitor] monitor NetworkManager changes

648.

The valid syntax is: '[root | parent <handle>] [handle <handle>] <qdisc>'

850.

The WireGuard config file must be a valid interface name followed by ".conf"

877.

Indicates whether Fast Initial Link Setup (802.11ai) must be enabled for the connection. One of NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_FILS_DISABLE (1) (disable FILS), NM_SETTING_WIRELESS_SECURITY_FILS_OPTIONAL (2) (enable FILS if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_FILS_REQUIRED (3) (enable FILS and fail if not supported). When set to NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) and no global default is set, FILS will be optionally enabled.

879.

Key management used for the connection. One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-none" (Ad-Hoc WPA-PSK), "wpa-psk" (infrastructure WPA-PSK), "sae" (SAE) or "wpa-eap" (WPA-Enterprise). This property must be set for any Wi-Fi connection that uses security.

949.

When a value grater than 0 is set, configures the device to use the specified speed. If "auto-negotiate" is "yes" the specified speed will be the only one advertised during link negotiation: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabit speeds, as in this case link negotiation is mandatory. If the value is unset (0, the default), the link configuration will be either skipped (if "auto-negotiate" is "no", the default) or will be auto-negotiated (if "auto-negotiate" is "yes") and the local device will advertise all the supported speeds. In Mbit/s, ie 100 == 100Mbit/s. Must be set together with the "duplex" property when non-zero. Before specifying a speed value be sure your device supports it.

986.

Whether Link-Local Multicast Name Resolution (LLMNR) is enabled for the connection. LLMNR is a protocol based on the Domain Name System (DNS) packet format that allows both IPv4 and IPv6 hosts to perform name resolution for hosts on the same local link. The permitted values are: yes: register hostname and resolving for the connection, no: disable LLMNR for the interface, resolve: do not register hostname but allow resolving of LLMNR host names. This feature requires a plugin which supports LLMNR. One such plugin is dns-systemd-resolved.

988.

Whether mDNS is enabled for the connection. The permitted values are: yes: register hostname and resolving for the connection, no: disable mDNS for the interface, resolve: do not register hostname but allow resolving of mDNS host names. This feature requires a plugin which supports mDNS. One such plugin is dns-systemd-resolved.