Browsing Hebrew translation

Don't show this notice anymore
Before translating, be sure to go through Ubuntu Translators instructions.
110 of 536 results
11.
Test your system and submit results to Launchpad
(no translation yet)
Located in ../qt/checkbox-qt.desktop.in.h:2
14.
PURPOSE:
HDMI audio interface verification
STEPS:
1. Plug an external HDMI device with sound (Use only one HDMI/DisplayPort interface at a time for this test)
2. Click the Test button
VERIFICATION:
Did you hear the sound from the HDMI device?
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
(no translation yet)
Located in ../jobs/audio.txt.in:40
15.
PURPOSE:
DisplayPort audio interface verification
STEPS:
1. Plug an external DisplayPort device with sound (Use only one HDMI/DisplayPort interface at a time for this test)
2. Click the Test button
VERIFICATION:
Did you hear the sound from the DisplayPort device?
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
(no translation yet)
Located in ../jobs/audio.txt.in:59
21.
Collect audio-related system information. This data can be used to simulate this computer's audio subsystem and perform more detailed tests under a controlled environment.
description
(no translation yet)
Located in ../jobs/audio.txt.in:165
24.
This test will verify that the volume levels are at an acceptable level on your local system. The test will validate that the volume is greater than or equal to minvol and less than or equal to maxvol for all sources (inputs) and sinks (outputs) recognized by PulseAudio. It will also validate that the active source and sink are not muted. You should not manually adjust the volume or mute before running this test.
description
(no translation yet)
Located in ../jobs/audio.txt.in:185
25.
PURPOSE:
Check that external line out connection works correctly
STEPS:
1. Insert cable to speakers (with built-in amplifiers) on the line out port
2. Open system sound preferences, 'Output' tab, select 'Line-out' on the connector list. Click the Test button
3. On the system sound preferences, select 'Internal Audio' on the device list and click 'Test Speakers' to check left and right channel
VERIFICATION:
1. Do you hear a sound in the speakers? The internal speakers should *not* be muted automatically
2. Do you hear the sound coming out on the corresponding channel?
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
(no translation yet)
Located in ../jobs/audio.txt.in:208
26.
PURPOSE:
Check that external line in connection works correctly
STEPS:
1. Use a cable to connect the line in port to an external line out source.
2. Open system sound preferences, 'Input' tab, select 'Line-in' on the connector list. Click the Test button
3. After a few seconds, your recording will be played back to you.
VERIFICATION:
Did you hear your recording?
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
(no translation yet)
Located in ../jobs/audio.txt.in:228
27.
PURPOSE:
Check that balance control works correctly on internal speakers
STEPS:
1. Check that moving the balance slider from left to right works smoothly
2. Click the Test button to play an audio tone for 10 seconds.
3. Move the balance slider from left to right and back.
4. Check that actual speaker audio balance follows your setting.
VERIFICATION:
Does the slider move smoothly, as well as being followed by the setting by the actual audio output?
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
(no translation yet)
Located in ../jobs/audio.txt.in:289
28.
PURPOSE:
Check that balance control works correctly on external headphone
STEPS:
1. Check that moving the balance slider from left to right works smoothly
2. Click the Test button to play an audio tone for 10 seconds.
3. Move the balance slider from left to right and back.
4. Check that actual headphone audio balance follows your setting.
VERIFICATION:
Does the slider move smoothly, as well as being followed by the setting by the actual audio output?
description
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.
(no translation yet)
Located in ../jobs/audio.txt.in:310
30.
Run gtkperf to make sure that GTK based test cases work
description
(no translation yet)
Located in ../jobs/benchmarks.txt.in:35
110 of 536 results

This translation is managed by Ubuntu Hebrew Translators, assigned by Ubuntu Translators.

You are not logged in. Please log in to work on translations.

Contributors to this translation: Arthur Zamarin, Dudu Edri, Ofir Klinger, Omri Strumza, Vladi Pryadko, Yaron, do2or, kulight, moshenahmias, wrewre, yoav danieli.