Browsing Brazilian Portuguese translation

22.

Connection (name, UUID, or path)

23.

VPN connection (name, UUID, or path)

24.

Connection(s) (name, UUID, or path)

25.

Connection(s) (name, UUID, path or apath)

30.

Usage: nmcli connection add { ARGUMENTS | help }

ARGUMENTS := COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS SLAVE_OPTIONS IP_OPTIONS [-- ([+|-]<setting>.<property> <value>)+]

COMMON_OPTIONS:
type <type>
ifname <interface name> | "*"
[con-name <connection name>]
[autoconnect yes|no]
[save yes|no]
[master <master (ifname, or connection UUID or name)>]
[slave-type <master connection type>]

TYPE_SPECIFIC_OPTIONS:
ethernet: [mac <MAC address>]
[cloned-mac <cloned MAC address>]
[mtu <MTU>]

wifi: ssid <SSID>
[mac <MAC address>]
[cloned-mac <cloned MAC address>]
[mtu <MTU>]
[mode infrastructure|ap|adhoc]

wimax: [mac <MAC address>]
[nsp <NSP>]

pppoe: username <PPPoE username>
[password <PPPoE password>]
[service <PPPoE service name>]
[mtu <MTU>]
[mac <MAC address>]

gsm: apn <APN>
[user <username>]
[password <password>]

cdma: [user <username>]
[password <password>]

infiniband: [mac <MAC address>]
[mtu <MTU>]
[transport-mode datagram | connected]
[parent <ifname>]
[p-key <IPoIB P_Key>]

bluetooth: [addr <bluetooth address>]
[bt-type panu|nap|dun-gsm|dun-cdma]

vlan: dev <parent device (connection UUID, ifname, or MAC)>
id <VLAN ID>
[flags <VLAN flags>]
[ingress <ingress priority mapping>]
[egress <egress priority mapping>]
[mtu <MTU>]

bond: [mode balance-rr (0) | active-backup (1) | balance-xor (2) | broadcast (3) |
802.3ad (4) | balance-tlb (5) | balance-alb (6)]
[primary <ifname>]
[miimon <num>]
[downdelay <num>]
[updelay <num>]
[arp-interval <num>]
[arp-ip-target <num>]
[lacp-rate slow (0) | fast (1)]

bond-slave: master <master (ifname, or connection UUID or name)>

team: [config <file>|<raw JSON data>]

team-slave: master <master (ifname, or connection UUID or name)>
[config <file>|<raw JSON data>]

bridge: [stp yes|no]
[priority <num>]
[forward-delay <2-30>]
[hello-time <1-10>]
[max-age <6-40>]
[ageing-time <0-1000000>]
[multicast-snooping yes|no]
[mac <MAC address>]

bridge-slave: master <master (ifname, or connection UUID or name)>
[priority <0-63>]
[path-cost <1-65535>]
[hairpin yes|no]

vpn: vpn-type vpnc|openvpn|pptp|openconnect|openswan|libreswan|ssh|l2tp|iodine|...
[user <username>]

olpc-mesh: ssid <SSID>
[channel <1-13>]
[dhcp-anycast <MAC address>]

adsl: username <username>
protocol pppoa|pppoe|ipoatm
[password <password>]
[encapsulation vcmux|llc]

tun: mode tun|tap
[owner <UID>]
[group <GID>]
[pi yes|no]
[vnet-hdr yes|no]
[multi-queue yes|no]

ip-tunnel: mode ipip|gre|sit|isatap|vti|ip6ip6|ipip6|ip6gre|vti6
remote <remote endpoint IP>
[local <local endpoint IP>]
[dev <parent device (ifname or connection UUID)>]

macsec: dev <parent device (connection UUID, ifname, or MAC)>
mode <psk|eap>
[cak <key> ckn <key>]
[encrypt yes|no]
[port 1-65534]


macvlan: dev <parent device (connection UUID, ifname, or MAC)>
mode vepa|bridge|private|passthru|source
[tap yes|no]

vxlan: id <VXLAN ID>
remote <IP of multicast group or remote address>
[local <source IP>]
[dev <parent device (ifname or connection UUID)>]
[source-port-min <0-65535>]
[source-port-max <0-65535>]
[destination-port <0-65535>]

dummy:

SLAVE_OPTIONS:
bridge: [priority <0-63>]
[path-cost <1-65535>]
[hairpin yes|no]

team: [config <file>|<raw JSON data>]

IP_OPTIONS:
[ip4 <IPv4 address>] [gw4 <IPv4 gateway>]
[ip6 <IPv6 address>] [gw6 <IPv6 gateway>]

74.

device '%s' not compatible with connection '%s':

250.

Usage: nmcli device { COMMAND | help }

COMMAND := { status | show | set | connect | reapply | modify | disconnect | delete | monitor | wifi | lldp }

status

show [<ifname>]

set [ifname] <ifname> [autoconnect yes|no] [managed yes|no]

connect <ifname>

reapply <ifname>

modify <ifname> ([+|-]<setting>.<property> <value>)+

disconnect <ifname> ...

delete <ifname> ...

monitor <ifname> ...

wifi [list [ifname <ifname>] [bssid <BSSID>]]

wifi connect <(B)SSID> [password <password>] [wep-key-type key|phrase] [ifname <ifname>]
[bssid <BSSID>] [name <name>] [private yes|no] [hidden yes|no]

wifi hotspot [ifname <ifname>] [con-name <name>] [ssid <SSID>] [band a|bg] [channel <channel>] [password <password>]

wifi rescan [ifname <ifname>] [[ssid <SSID to scan>] ...]

lldp [list [ifname <ifname>]]

260.

Usage: nmcli device wifi { ARGUMENTS | help }

Perform operation on Wi-Fi devices.

ARGUMENTS := [list [ifname <ifname>] [bssid <BSSID>]]

List available Wi-Fi access points. The 'ifname' and 'bssid' options can be
used to list APs for a particular interface, or with a specific BSSID.

ARGUMENTS := connect <(B)SSID> [password <password>] [wep-key-type key|phrase] [ifname <ifname>]
[bssid <BSSID>] [name <name>] [private yes|no] [hidden yes|no]

Connect to a Wi-Fi network specified by SSID or BSSID. The command creates
a new connection and then activates it on a device. This is a command-line
counterpart of clicking an SSID in a GUI client. The command always creates
a new connection and thus it is mainly useful for connecting to new Wi-Fi
networks. If a connection for the network already exists, it is better to
bring up the existing profile as follows: nmcli con up id <name>. Note that
only open, WEP and WPA-PSK networks are supported at the moment. It is also
assumed that IP configuration is obtained via DHCP.

ARGUMENTS := hotspot [ifname <ifname>] [con-name <name>] [ssid <SSID>]
[band a|bg] [channel <channel>] [password <password>]

Create a Wi-Fi hotspot. Use 'connection down' or 'device disconnect'
to stop the hotspot.
Parameters of the hotspot can be influenced by the optional parameters:
ifname - Wi-Fi device to use
con-name - name of the created hotspot connection profile
ssid - SSID of the hotspot
band - Wi-Fi band to use
channel - Wi-Fi channel to use
password - password to use for the hotspot

ARGUMENTS := rescan [ifname <ifname>] [[ssid <SSID to scan>] ...]

Request that NetworkManager immediately re-scan for available access points.
NetworkManager scans Wi-Fi networks periodically, but in some cases it might
be useful to start scanning manually. 'ssid' allows scanning for a specific
SSID, which is useful for APs with hidden SSIDs. More 'ssid' parameters can be
given. Note that this command does not show the APs,
use 'nmcli device wifi list' for that.

421.

Usage: nmcli [OPTIONS] OBJECT { COMMAND | help }

OPTIONS
-t[erse] terse output
-p[retty] pretty output
-m[ode] tabular|multiline output mode
-c[olors] auto|yes|no whether to use colors in output
-f[ields] <field1,field2,...>|all|common specify fields to output
-g[et-values] <field1,field2,...>|all|common shortcut for -m tabular -t -f
-e[scape] yes|no escape columns separators in values
-a[sk] ask for missing parameters
-s[how-secrets] allow displaying passwords
-w[ait] <seconds> set timeout waiting for finishing operations
-v[ersion] show program version
-h[elp] print this help

OBJECT
g[eneral] NetworkManager's general status and operations
n[etworking] overall networking control
r[adio] NetworkManager radio switches
c[onnection] NetworkManager's connections
d[evice] devices managed by NetworkManager
a[gent] NetworkManager secret agent or polkit agent
m[onitor] monitor NetworkManager changes

539.

OpenVSwitch database connection failed