Translations by Joel Addison
Joel Addison has submitted the following strings to this translation. Contributions are visually coded: currently used translations, unreviewed suggestions, rejected suggestions.
1 → 42 of 42 results | First • Previous • Next • Last |
11. |
brace expansion: cannot allocate memory for %s
|
|
2015-05-20 |
brace expansion: cannot allocate memory for %s
|
|
12. |
brace expansion: failed to allocate memory for %d elements
|
|
2015-05-20 |
brace expansion: failed to allocate memory for %d elements
|
|
13. |
brace expansion: failed to allocate memory for `%s'
|
|
2015-05-20 |
brace expansion: failed to allocate memory for `%s'
|
|
63. |
%s: reference variable cannot be an array
|
|
2015-05-20 |
%s: reference variable cannot be an array
|
|
64. |
%s: nameref variable self references not allowed
|
|
2015-05-20 |
%s: nameref variable self references not allowed
|
|
117. |
format parsing problem: %s
|
|
2015-05-20 |
format parsing problem: %s
|
|
121. |
%s: invalid argument
|
|
2015-05-20 |
%s: invalid argument
|
|
169. |
%s: maximum function nesting level exceeded (%d)
|
|
2015-05-20 |
%s: maximum function nesting level exceeded (%d)
|
|
174. |
%s: cannot execute binary file: %s
|
|
2015-05-20 |
%s: cannot execute binary file: %s
|
|
175. |
`%s': is a special builtin
|
|
2015-05-20 |
`%s': is a special builtin
|
|
304. |
-ilrsD or -c command or -O shopt_option (invocation only)
|
|
2015-05-20 |
-ilrsD or -c command or -O shopt_option (invocation only)
|
|
362. |
%s: invalid variable name for name reference
|
|
2015-05-20 |
%s: invalid variable name for name reference
|
|
383. |
%s: circular name reference
|
|
2015-05-20 |
%s: circular name reference
|
|
385. |
%s: variable may not be assigned value
|
|
2015-05-20 |
%s: variable may not be assigned value
|
|
395. |
%s: %s: compatibility value out of range
|
|
2015-05-20 |
%s: %s: compatibility value out of range
|
|
396. |
Copyright (C) 2013 Free Software Foundation, Inc.
|
|
2015-05-20 |
Copyright (C) 2013 Free Software Foundation, Inc.
|
|
399. |
This is free software; you are free to change and redistribute it.
|
|
2015-05-20 |
This is free software; you are free to change and redistribute it.
|
|
400. |
There is NO WARRANTY, to the extent permitted by law.
|
|
2015-05-20 |
There is NO WARRANTY, to the extent permitted by law.
|
|
401. |
Copyright (C) 2012 Free Software Foundation, Inc.
|
|
2015-05-20 |
Copyright (C) 2012 Free Software Foundation, Inc.
|
|
408. |
bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-x keyseq:shell-command] [keyseq:readline-function or readline-command]
|
|
2015-05-20 |
bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-x keyseq:shell-command] [keyseq:readline-function or readline-command]
|
|
413. |
cd [-L|[-P [-e]] [-@]] [dir]
|
|
2015-05-20 |
cd [-L|[-P [-e]] [-@]] [dir]
|
|
419. |
declare [-aAfFgilnrtux] [-p] [name[=value] ...]
|
|
2015-05-20 |
declare [-aAfFgilnrtux] [-p] [name[=value] ...]
|
|
443. |
unset [-f] [-v] [-n] [name ...]
|
|
2015-05-20 |
unset [-f] [-v] [-n] [name ...]
|
|
455. |
ulimit [-SHabcdefilmnpqrstuvxT] [limit]
|
|
2015-05-20 |
ulimit [-SHabcdefilmnpqrstuvxT] [limit]
|
|
457. |
wait [-n] [id ...]
|
|
2015-05-20 |
wait [-n] [id ...]
|
|
458. |
wait [pid ...]
|
|
2015-05-20 |
wait [pid ...]
|
|
486. |
Set Readline key bindings and variables.
Bind a key sequence to a Readline function or a macro, or set a
Readline variable. The non-option argument syntax is equivalent to
that found in ~/.inputrc, but must be passed as a single argument:
e.g., bind '"\C-x\C-r": re-read-init-file'.
Options:
-m keymap Use KEYMAP as the keymap for the duration of this
command. Acceptable keymap names are emacs,
emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move,
vi-command, and vi-insert.
-l List names of functions.
-P List function names and bindings.
-p List functions and bindings in a form that can be
reused as input.
-S List key sequences that invoke macros and their values
-s List key sequences that invoke macros and their values
in a form that can be reused as input.
-V List variable names and values
-v List variable names and values in a form that can
be reused as input.
-q function-name Query about which keys invoke the named function.
-u function-name Unbind all keys which are bound to the named function.
-r keyseq Remove the binding for KEYSEQ.
-f filename Read key bindings from FILENAME.
-x keyseq:shell-command Cause SHELL-COMMAND to be executed when
KEYSEQ is entered.
-X List key sequences bound with -x and associated commands
in a form that can be reused as input.
Exit Status:
bind returns 0 unless an unrecognized option is given or an error occurs.
|
|
2015-05-20 |
Set Readline key bindings and variables.
Bind a key sequence to a Readline function or a macro, or set a
Readline variable. The non-option argument syntax is equivalent to
that found in ~/.inputrc, but must be passed as a single argument:
e.g., bind '"\C-x\C-r": re-read-init-file'.
Options:
-m keymap Use KEYMAP as the keymap for the duration of this
command. Acceptable keymap names are emacs,
emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move,
vi-command, and vi-insert.
-l List names of functions.
-P List function names and bindings.
-p List functions and bindings in a form that can be
reused as input.
-S List key sequences that invoke macros and their values
-s List key sequences that invoke macros and their values
in a form that can be reused as input.
-V List variable names and values
-v List variable names and values in a form that can
be reused as input.
-q function-name Query about which keys invoke the named function.
-u function-name Unbind all keys which are bound to the named function.
-r keyseq Remove the binding for KEYSEQ.
-f filename Read key bindings from FILENAME.
-x keyseq:shell-command Cause SHELL-COMMAND to be executed when
KEYSEQ is entered.
-X List key sequences bound with -x and associated commands
in a form that can be reused as input.
Exit Status:
bind returns 0 unless an unrecognised option is given or an error occurs.
|
|
491. |
Change the shell working directory.
Change the current directory to DIR. The default DIR is the value of the
HOME shell variable.
The variable CDPATH defines the search path for the directory containing
DIR. Alternative directory names in CDPATH are separated by a colon (:).
A null directory name is the same as the current directory. If DIR begins
with a slash (/), then CDPATH is not used.
If the directory is not found, and the shell option `cdable_vars' is set,
the word is assumed to be a variable name. If that variable has a value,
its value is used for DIR.
Options:
-L force symbolic links to be followed: resolve symbolic links in
DIR after processing instances of `..'
-P use the physical directory structure without following symbolic
links: resolve symbolic links in DIR before processing instances
of `..'
-e if the -P option is supplied, and the current working directory
cannot be determined successfully, exit with a non-zero status
-@ on systems that support it, present a file with extended attributes
as a directory containing the file attributes
The default is to follow symbolic links, as if `-L' were specified.
`..' is processed by removing the immediately previous pathname component
back to a slash or the beginning of DIR.
Exit Status:
Returns 0 if the directory is changed, and if $PWD is set successfully when
-P is used; non-zero otherwise.
|
|
2015-05-20 |
Change the shell working directory.
Change the current directory to DIR. The default DIR is the value of the
HOME shell variable.
The variable CDPATH defines the search path for the directory containing
DIR. Alternative directory names in CDPATH are separated by a colon (:).
A null directory name is the same as the current directory. If DIR begins
with a slash (/), then CDPATH is not used.
If the directory is not found, and the shell option `cdable_vars' is set,
the word is assumed to be a variable name. If that variable has a value,
its value is used for DIR.
Options:
-L force symbolic links to be followed: resolve symbolic links in
DIR after processing instances of `..'
-P use the physical directory structure without following symbolic
links: resolve symbolic links in DIR before processing instances
of `..'
-e if the -P option is supplied, and the current working directory
cannot be determined successfully, exit with a non-zero status
-@ on systems that support it, present a file with extended attributes
as a directory containing the file attributes
The default is to follow symbolic links, as if `-L' were specified.
`..' is processed by removing the immediately previous pathname component
back to a slash or the beginning of DIR.
Exit Status:
Returns 0 if the directory is changed, and if $PWD is set successfully when
-P is used; non-zero otherwise.
|
|
497. |
Set variable values and attributes.
Declare variables and give them attributes. If no NAMEs are given,
display the attributes and values of all variables.
Options:
-f restrict action or display to function names and definitions
-F restrict display to function names only (plus line number and
source file when debugging)
-g create global variables when used in a shell function; otherwise
ignored
-p display the attributes and value of each NAME
Options which set attributes:
-a to make NAMEs indexed arrays (if supported)
-A to make NAMEs associative arrays (if supported)
-i to make NAMEs have the `integer' attribute
-l to convert NAMEs to lower case on assignment
-n make NAME a reference to the variable named by its value
-r to make NAMEs readonly
-t to make NAMEs have the `trace' attribute
-u to convert NAMEs to upper case on assignment
-x to make NAMEs export
Using `+' instead of `-' turns off the given attribute.
Variables with the integer attribute have arithmetic evaluation (see
the `let' command) performed when the variable is assigned a value.
When used in a function, `declare' makes NAMEs local, as with the `local'
command. The `-g' option suppresses this behavior.
Exit Status:
Returns success unless an invalid option is supplied or a variable
assignment error occurs.
|
|
2015-05-20 |
Set variable values and attributes.
Declare variables and give them attributes. If no NAMEs are given,
display the attributes and values of all variables.
Options:
-f restrict action or display to function names and definitions
-F restrict display to function names only (plus line number and
source file when debugging)
-g create global variables when used in a shell function; otherwise
ignored
-p display the attributes and value of each NAME
Options which set attributes:
-a to make NAMEs indexed arrays (if supported)
-A to make NAMEs associative arrays (if supported)
-i to make NAMEs have the `integer' attribute
-l to convert NAMEs to lower case on assignment
-n make NAME a reference to the variable named by its value
-r to make NAMEs readonly
-t to make NAMEs have the `trace' attribute
-u to convert NAMEs to upper case on assignment
-x to make NAMEs export
Using `+' instead of `-' turns off the given attribute.
Variables with the integer attribute have arithmetic evaluation (see
the `let' command) performed when the variable is assigned a value.
When used in a function, `declare' makes NAMEs local, as with the `local'
command. The `-g' option suppresses this behavior.
Exit Status:
Returns success unless an invalid option is supplied or a variable
assignment error occurs.
|
|
499. |
Define local variables.
Create a local variable called NAME, and give it VALUE. OPTION can
be any option accepted by `declare'.
Local variables can only be used within a function; they are visible
only to the function where they are defined and its children.
Exit Status:
Returns success unless an invalid option is supplied, a variable
assignment error occurs, or the shell is not executing a function.
|
|
2015-05-20 |
Define local variables.
Create a local variable called NAME, and give it VALUE. OPTION can
be any option accepted by `declare'.
Local variables can only be used within a function; they are visible
only to the function where they are defined and its children.
Exit Status:
Returns success unless an invalid option is supplied, a variable
assignment error occurs, or the shell is not executing a function.
|
|
500. |
Write arguments to the standard output.
Display the ARGs, separated by a single space character and followed by a
newline, on the standard output.
Options:
-n do not append a newline
-e enable interpretation of the following backslash escapes
-E explicitly suppress interpretation of backslash escapes
`echo' interprets the following backslash-escaped characters:
\a alert (bell)
\b backspace
\c suppress further output
\e escape character
\E escape character
\f form feed
\n new line
\r carriage return
\t horizontal tab
\v vertical tab
\\ backslash
\0nnn the character whose ASCII code is NNN (octal). NNN can be
0 to 3 octal digits
\xHH the eight-bit character whose value is HH (hexadecimal). HH
can be one or two hex digits
Exit Status:
Returns success unless a write error occurs.
|
|
2015-05-20 |
Write arguments to the standard output.
Display the ARGs, separated by a single space character and followed by a
newline, on the standard output.
Options:
-n do not append a newline
-e enable interpretation of the following backslash escapes
-E explicitly suppress interpretation of backslash escapes
`echo' interprets the following backslash-escaped characters:
\a alert (bell)
\b backspace
\c suppress further output
\e escape character
\E escape character
\f form feed
\n new line
\r carriage return
\t horizontal tab
\v vertical tab
\[tab]backslash
\0nnn the character whose ASCII code is NNN (octal). NNN can be
0 to 3 octal digits
\xHH the eight-bit character whose value is HH (hexadecimal). HH
can be one or two hex digits
Exit Status:
Returns success unless a write error occurs.
|
|
511. |
Remember or display program locations.
Determine and remember the full pathname of each command NAME. If
no arguments are given, information about remembered commands is displayed.
Options:
-d forget the remembered location of each NAME
-l display in a format that may be reused as input
-p pathname use PATHNAME as the full pathname of NAME
-r forget all remembered locations
-t print the remembered location of each NAME, preceding
each location with the corresponding NAME if multiple
NAMEs are given
Arguments:
NAME Each NAME is searched for in $PATH and added to the list
of remembered commands.
Exit Status:
Returns success unless NAME is not found or an invalid option is given.
|
|
2015-05-20 |
Remember or display program locations.
Determine and remember the full pathname of each command NAME. If
no arguments are given, information about remembered commands is displayed.
Options:
-d forget the remembered location of each NAME
-l display in a format that may be reused as input
-p pathname use PATHNAME as the full pathname of NAME
-r forget all remembered locations
-t print the remembered location of each NAME, preceding
each location with the corresponding NAME if multiple
NAMEs are given
Arguments:
NAME Each NAME is searched for in $PATH and added to the list
of remembered commands.
Exit Status:
Returns success unless NAME is not found or an invalid option is given.
|
|
514. |
Display status of jobs.
Lists the active jobs. JOBSPEC restricts output to that job.
Without options, the status of all active jobs is displayed.
Options:
-l lists process IDs in addition to the normal information
-n lists only processes that have changed status since the last
notification
-p lists process IDs only
-r restrict output to running jobs
-s restrict output to stopped jobs
If -x is supplied, COMMAND is run after all job specifications that
appear in ARGS have been replaced with the process ID of that job's
process group leader.
Exit Status:
Returns success unless an invalid option is given or an error occurs.
If -x is used, returns the exit status of COMMAND.
|
|
2015-05-20 |
Display status of jobs.
Lists the active jobs. JOBSPEC restricts output to that job.
Without options, the status of all active jobs is displayed.
Options:
-l lists process IDs in addition to the normal information
-n lists only processes that have changed status since the last
notification
-p lists process IDs only
-r restrict output to running jobs
-s restrict output to stopped jobs
If -x is supplied, COMMAND is run after all job specifications that
appear in ARGS have been replaced with the process ID of that job's
process group leader.
Exit Status:
Returns success unless an invalid option is given or an error occurs.
If -x is used, returns the exit status of COMMAND.
|
|
518. |
Read a line from the standard input and split it into fields.
Reads a single line from the standard input, or from file descriptor FD
if the -u option is supplied. The line is split into fields as with word
splitting, and the first word is assigned to the first NAME, the second
word to the second NAME, and so on, with any leftover words assigned to
the last NAME. Only the characters found in $IFS are recognized as word
delimiters.
If no NAMEs are supplied, the line read is stored in the REPLY variable.
Options:
-a array assign the words read to sequential indices of the array
variable ARRAY, starting at zero
-d delim continue until the first character of DELIM is read, rather
than newline
-e use Readline to obtain the line in an interactive shell
-i text Use TEXT as the initial text for Readline
-n nchars return after reading NCHARS characters rather than waiting
for a newline, but honor a delimiter if fewer than NCHARS
characters are read before the delimiter
-N nchars return only after reading exactly NCHARS characters, unless
EOF is encountered or read times out, ignoring any delimiter
-p prompt output the string PROMPT without a trailing newline before
attempting to read
-r do not allow backslashes to escape any characters
-s do not echo input coming from a terminal
-t timeout time out and return failure if a complete line of input is
not read within TIMEOUT seconds. The value of the TMOUT
variable is the default timeout. TIMEOUT may be a
fractional number. If TIMEOUT is 0, read returns immediately,
without trying to read any data, returning success only if
input is available on the specified file descriptor. The
exit status is greater than 128 if the timeout is exceeded
-u fd read from file descriptor FD instead of the standard input
Exit Status:
The return code is zero, unless end-of-file is encountered, read times out
(in which case it's greater than 128), a variable assignment error occurs,
or an invalid file descriptor is supplied as the argument to -u.
|
|
2015-05-20 |
Read a line from the standard input and split it into fields.
Reads a single line from the standard input, or from file descriptor FD
if the -u option is supplied. The line is split into fields as with word
splitting, and the first word is assigned to the first NAME, the second
word to the second NAME, and so on, with any leftover words assigned to
the last NAME. Only the characters found in $IFS are recognised as word
delimiters.
If no NAMEs are supplied, the line read is stored in the REPLY variable.
Options:
-a array assign the words read to sequential indices of the array
variable ARRAY, starting at zero
-d delim continue until the first character of DELIM is read, rather
than newline
-e use Readline to obtain the line in an interactive shell
-i text Use TEXT as the initial text for Readline
-n nchars return after reading NCHARS characters rather than waiting
for a newline, but honour a delimiter if fewer than NCHARS
characters are read before the delimiter
-N nchars return only after reading exactly NCHARS characters, unless
EOF is encountered or read times out, ignoring any delimiter
-p prompt output the string PROMPT without a trailing newline before
attempting to read
-r do not allow backslashes to escape any characters
-s do not echo input coming from a terminal
-t timeout time out and return failure if a complete line of input is
not read within TIMEOUT seconds. The value of the TMOUT
variable is the default timeout. TIMEOUT may be a
fractional number. If TIMEOUT is 0, read returns immediately,
without trying to read any data, returning success only if
input is available on the specified file descriptor. The
exit status is greater than 128 if the timeout is exceeded
-u fd read from file descriptor FD instead of the standard input
Exit Status:
The return code is zero, unless end-of-file is encountered, read times out
(in which case it's greater than 128), a variable assignment error occurs,
or an invalid file descriptor is supplied as the argument to -u.
|
|
520. |
Set or unset values of shell options and positional parameters.
Change the value of shell attributes and positional parameters, or
display the names and values of shell variables.
Options:
-a Mark variables which are modified or created for export.
-b Notify of job termination immediately.
-e Exit immediately if a command exits with a non-zero status.
-f Disable file name generation (globbing).
-h Remember the location of commands as they are looked up.
-k All assignment arguments are placed in the environment for a
command, not just those that precede the command name.
-m Job control is enabled.
-n Read commands but do not execute them.
-o option-name
Set the variable corresponding to option-name:
allexport same as -a
braceexpand same as -B
emacs use an emacs-style line editing interface
errexit same as -e
errtrace same as -E
functrace same as -T
hashall same as -h
histexpand same as -H
history enable command history
ignoreeof the shell will not exit upon reading EOF
interactive-comments
allow comments to appear in interactive commands
keyword same as -k
monitor same as -m
noclobber same as -C
noexec same as -n
noglob same as -f
nolog currently accepted but ignored
notify same as -b
nounset same as -u
onecmd same as -t
physical same as -P
pipefail the return value of a pipeline is the status of
the last command to exit with a non-zero status,
or zero if no command exited with a non-zero status
posix change the behavior of bash where the default
operation differs from the Posix standard to
match the standard
privileged same as -p
verbose same as -v
vi use a vi-style line editing interface
xtrace same as -x
-p Turned on whenever the real and effective user ids do not match.
Disables processing of the $ENV file and importing of shell
functions. Turning this option off causes the effective uid and
gid to be set to the real uid and gid.
-t Exit after reading and executing one command.
-u Treat unset variables as an error when substituting.
-v Print shell input lines as they are read.
-x Print commands and their arguments as they are executed.
-B the shell will perform brace expansion
-C If set, disallow existing regular files to be overwritten
by redirection of output.
-E If set, the ERR trap is inherited by shell functions.
-H Enable ! style history substitution. This flag is on
by default when the shell is interactive.
-P If set, do not resolve symbolic links when executing commands
such as cd which change the current directory.
-T If set, the DEBUG trap is inherited by shell functions.
-- Assign any remaining arguments to the positional parameters.
If there are no remaining arguments, the positional parameters
are unset.
- Assign any remaining arguments to the positional parameters.
The -x and -v options are turned off.
Using + rather than - causes these flags to be turned off. The
flags can also be used upon invocation of the shell. The current
set of flags may be found in $-. The remaining n ARGs are positional
parameters and are assigned, in order, to $1, $2, .. $n. If no
ARGs are given, all shell variables are printed.
Exit Status:
Returns success unless an invalid option is given.
|
|
2015-05-20 |
Set or unset values of shell options and positional parameters.
Change the value of shell attributes and positional parameters, or
display the names and values of shell variables.
Options:
-a Mark variables which are modified or created for export.
-b Notify of job termination immediately.
-e Exit immediately if a command exits with a non-zero status.
-f Disable file name generation (globbing).
-h Remember the location of commands as they are looked up.
-k All assignment arguments are placed in the environment for a
command, not just those that precede the command name.
-m Job control is enabled.
-n Read commands but do not execute them.
-o option-name
Set the variable corresponding to option-name:
allexport same as -a
braceexpand same as -B
emacs use an emacs-style line editing interface
errexit same as -e
errtrace same as -E
functrace same as -T
hashall same as -h
histexpand same as -H
history enable command history
ignoreeof the shell will not exit upon reading EOF
interactive-comments
allow comments to appear in interactive commands
keyword same as -k
monitor same as -m
noclobber same as -C
noexec same as -n
noglob same as -f
nolog currently accepted but ignored
notify same as -b
nounset same as -u
onecmd same as -t
physical same as -P
pipefail the return value of a pipeline is the status of
the last command to exit with a non-zero status,
or zero if no command exited with a non-zero status
posix change the behavior of bash where the default
operation differs from the Posix standard to
match the standard
privileged same as -p
verbose same as -v
vi use a vi-style line editing interface
xtrace same as -x
-p Turned on whenever the real and effective user ids do not match.
Disables processing of the $ENV file and importing of shell
functions. Turning this option off causes the effective uid and
gid to be set to the real uid and gid.
-t Exit after reading and executing one command.
-u Treat unset variables as an error when substituting.
-v Print shell input lines as they are read.
-x Print commands and their arguments as they are executed.
-B the shell will perform brace expansion
-C If set, disallow existing regular files to be overwritten
by redirection of output.
-E If set, the ERR trap is inherited by shell functions.
-H Enable ! style history substitution. This flag is on
by default when the shell is interactive.
-P If set, do not resolve symbolic links when executing commands
such as cd which change the current directory.
-T If set, the DEBUG trap is inherited by shell functions.
-- Assign any remaining arguments to the positional parameters.
If there are no remaining arguments, the positional parameters
are unset.
- Assign any remaining arguments to the positional parameters.
The -x and -v options are turned off.
Using + rather than - causes these flags to be turned off. The
flags can also be used upon invocation of the shell. The current
set of flags may be found in $-. The remaining n ARGs are positional
parameters and are assigned, in order, to $1, $2, .. $n. If no
ARGs are given, all shell variables are printed.
Exit Status:
Returns success unless an invalid option is given.
|
|
521. |
Unset values and attributes of shell variables and functions.
For each NAME, remove the corresponding variable or function.
Options:
-f treat each NAME as a shell function
-v treat each NAME as a shell variable
-n treat each NAME as a name reference and unset the variable itself
rather than the variable it references
Without options, unset first tries to unset a variable, and if that fails,
tries to unset a function.
Some variables cannot be unset; also see `readonly'.
Exit Status:
Returns success unless an invalid option is given or a NAME is read-only.
|
|
2015-05-20 |
Unset values and attributes of shell variables and functions.
For each NAME, remove the corresponding variable or function.
Options:
-f treat each NAME as a shell function
-v treat each NAME as a shell variable
-n treat each NAME as a name reference and unset the variable itself
rather than the variable it references
Without options, unset first tries to unset a variable, and if that fails,
tries to unset a function.
Some variables cannot be unset; also see `readonly'.
Exit Status:
Returns success unless an invalid option is given or a NAME is read-only.
|
|
523. |
Mark shell variables as unchangeable.
Mark each NAME as read-only; the values of these NAMEs may not be
changed by subsequent assignment. If VALUE is supplied, assign VALUE
before marking as read-only.
Options:
-a refer to indexed array variables
-A refer to associative array variables
-f refer to shell functions
-p display a list of all readonly variables or functions, depending on
whether or not the -f option is given
An argument of `--' disables further option processing.
Exit Status:
Returns success unless an invalid option is given or NAME is invalid.
|
|
2015-05-20 |
Mark shell variables as unchangeable.
Mark each NAME as read-only; the values of these NAMEs may not be
changed by subsequent assignment. If VALUE is supplied, assign VALUE
before marking as read-only.
Options:
-a refer to indexed array variables
-A refer to associative array variables
-f refer to shell functions
-p display a list of all readonly variables or functions, depending on
whether or not the -f option is given
An argument of `--' disables further option processing.
Exit Status:
Returns success unless an invalid option is given or NAME is invalid.
|
|
527. |
Evaluate conditional expression.
Exits with a status of 0 (true) or 1 (false) depending on
the evaluation of EXPR. Expressions may be unary or binary. Unary
expressions are often used to examine the status of a file. There
are string operators and numeric comparison operators as well.
The behavior of test depends on the number of arguments. Read the
bash manual page for the complete specification.
File operators:
-a FILE True if file exists.
-b FILE True if file is block special.
-c FILE True if file is character special.
-d FILE True if file is a directory.
-e FILE True if file exists.
-f FILE True if file exists and is a regular file.
-g FILE True if file is set-group-id.
-h FILE True if file is a symbolic link.
-L FILE True if file is a symbolic link.
-k FILE True if file has its `sticky' bit set.
-p FILE True if file is a named pipe.
-r FILE True if file is readable by you.
-s FILE True if file exists and is not empty.
-S FILE True if file is a socket.
-t FD True if FD is opened on a terminal.
-u FILE True if the file is set-user-id.
-w FILE True if the file is writable by you.
-x FILE True if the file is executable by you.
-O FILE True if the file is effectively owned by you.
-G FILE True if the file is effectively owned by your group.
-N FILE True if the file has been modified since it was last read.
FILE1 -nt FILE2 True if file1 is newer than file2 (according to
modification date).
FILE1 -ot FILE2 True if file1 is older than file2.
FILE1 -ef FILE2 True if file1 is a hard link to file2.
String operators:
-z STRING True if string is empty.
-n STRING
STRING True if string is not empty.
STRING1 = STRING2
True if the strings are equal.
STRING1 != STRING2
True if the strings are not equal.
STRING1 < STRING2
True if STRING1 sorts before STRING2 lexicographically.
STRING1 > STRING2
True if STRING1 sorts after STRING2 lexicographically.
Other operators:
-o OPTION True if the shell option OPTION is enabled.
-v VAR True if the shell variable VAR is set
-R VAR True if the shell variable VAR is set and is a name reference.
! EXPR True if expr is false.
EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.
EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.
arg1 OP arg2 Arithmetic tests. OP is one of -eq, -ne,
-lt, -le, -gt, or -ge.
Arithmetic binary operators return true if ARG1 is equal, not-equal,
less-than, less-than-or-equal, greater-than, or greater-than-or-equal
than ARG2.
Exit Status:
Returns success if EXPR evaluates to true; fails if EXPR evaluates to
false or an invalid argument is given.
|
|
2015-05-20 |
Evaluate conditional expression.
Exits with a status of 0 (true) or 1 (false) depending on
the evaluation of EXPR. Expressions may be unary or binary. Unary
expressions are often used to examine the status of a file. There
are string operators and numeric comparison operators as well.
The behaviour of test depends on the number of arguments. Read the
bash manual page for the complete specification.
File operators:
-a FILE True if file exists.
-b FILE True if file is block special.
-c FILE True if file is character special.
-d FILE True if file is a directory.
-e FILE True if file exists.
-f FILE True if file exists and is a regular file.
-g FILE True if file is set-group-id.
-h FILE True if file is a symbolic link.
-L FILE True if file is a symbolic link.
-k FILE True if file has its `sticky' bit set.
-p FILE True if file is a named pipe.
-r FILE True if file is readable by you.
-s FILE True if file exists and is not empty.
-S FILE True if file is a socket.
-t FD True if FD is opened on a terminal.
-u FILE True if the file is set-user-id.
-w FILE True if the file is writeable by you.
-x FILE True if the file is executable by you.
-O FILE True if the file is effectively owned by you.
-G FILE True if the file is effectively owned by your group.
-N FILE True if the file has been modified since it was last read.
FILE1 -nt FILE2 True if file1 is newer than file2 (according to
modification date).
FILE1 -ot FILE2 True if file1 is older than file2.
FILE1 -ef FILE2 True if file1 is a hard link to file2.
String operators:
-z STRING True if string is empty.
-n STRING
STRING True if string is not empty.
STRING1 = STRING2
True if the strings are equal.
STRING1 != STRING2
True if the strings are not equal.
STRING1 < STRING2
True if STRING1 sorts before STRING2 lexicographically.
STRING1 > STRING2
True if STRING1 sorts after STRING2 lexicographically.
Other operators:
-o OPTION True if the shell option OPTION is enabled.
-v VAR True if the shell variable VAR is set
-R VAR True if the shell variable VAR is set and is a name reference.
! EXPR True if expr is false.
EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.
EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.
arg1 OP arg2 Arithmetic tests. OP is one of -eq, -ne,
-lt, -le, -gt, or -ge.
Arithmetic binary operators return true if ARG1 is equal, not-equal,
less-than, less-than-or-equal, greater-than, or greater-than-or-equal
than ARG2.
Exit Status:
Returns success if EXPR evaluates to true; fails if EXPR evaluates to
false or an invalid argument is given.
|
|
532. |
Modify shell resource limits.
Provides control over the resources available to the shell and processes
it creates, on systems that allow such control.
Options:
-S use the `soft' resource limit
-H use the `hard' resource limit
-a all current limits are reported
-b the socket buffer size
-c the maximum size of core files created
-d the maximum size of a process's data segment
-e the maximum scheduling priority (`nice')
-f the maximum size of files written by the shell and its children
-i the maximum number of pending signals
-l the maximum size a process may lock into memory
-m the maximum resident set size
-n the maximum number of open file descriptors
-p the pipe buffer size
-q the maximum number of bytes in POSIX message queues
-r the maximum real-time scheduling priority
-s the maximum stack size
-t the maximum amount of cpu time in seconds
-u the maximum number of user processes
-v the size of virtual memory
-x the maximum number of file locks
-T the maximum number of threads
Not all options are available on all platforms.
If LIMIT is given, it is the new value of the specified resource; the
special LIMIT values `soft', `hard', and `unlimited' stand for the
current soft limit, the current hard limit, and no limit, respectively.
Otherwise, the current value of the specified resource is printed. If
no option is given, then -f is assumed.
Values are in 1024-byte increments, except for -t, which is in seconds,
-p, which is in increments of 512 bytes, and -u, which is an unscaled
number of processes.
Exit Status:
Returns success unless an invalid option is supplied or an error occurs.
|
|
2015-05-20 |
Modify shell resource limits.
Provides control over the resources available to the shell and processes
it creates, on systems that allow such control.
Options:
-S use the `soft' resource limit
-H use the `hard' resource limit
-a all current limits are reported
-b the socket buffer size
-c the maximum size of core files created
-d the maximum size of a process's data segment
-e the maximum scheduling priority (`nice')
-f the maximum size of files written by the shell and its children
-i the maximum number of pending signals
-l the maximum size a process may lock into memory
-m the maximum resident set size
-n the maximum number of open file descriptors
-p the pipe buffer size
-q the maximum number of bytes in POSIX message queues
-r the maximum real-time scheduling priority
-s the maximum stack size
-t the maximum amount of cpu time in seconds
-u the maximum number of user processes
-v the size of virtual memory
-x the maximum number of file locks
-T the maximum number of threads
Not all options are available on all platforms.
If LIMIT is given, it is the new value of the specified resource; the
special LIMIT values `soft', `hard', and `unlimited' stand for the
current soft limit, the current hard limit, and no limit, respectively.
Otherwise, the current value of the specified resource is printed. If
no option is given, then -f is assumed.
Values are in 1024-byte increments, except for -t, which is in seconds,
-p, which is in increments of 512 bytes, and -u, which is an unscaled
number of processes.
Exit Status:
Returns success unless an invalid option is supplied or an error occurs.
|
|
534. |
Wait for job completion and return exit status.
Waits for each process identified by an ID, which may be a process ID or a
job specification, and reports its termination status. If ID is not
given, waits for all currently active child processes, and the return
status is zero. If ID is a a job specification, waits for all processes
in that job's pipeline.
If the -n option is supplied, waits for the next job to terminate and
returns its exit status.
Exit Status:
Returns the status of the last ID; fails if ID is invalid or an invalid
option is given.
|
|
2015-05-20 |
Wait for job completion and return exit status.
Waits for each process identified by an ID, which may be a process ID or a
job specification, and reports its termination status. If ID is not
given, waits for all currently active child processes, and the return
status is zero. If ID is a a job specification, waits for all processes
in that job's pipeline.
If the -n option is supplied, waits for the next job to terminate and
returns its exit status.
Exit Status:
Returns the status of the last ID; fails if ID is invalid or an invalid
option is given.
|
|
535. |
Wait for process completion and return exit status.
Waits for each process specified by a PID and reports its termination status.
If PID is not given, waits for all currently active child processes,
and the return status is zero. PID must be a process ID.
Exit Status:
Returns the status of the last PID; fails if PID is invalid or an invalid
option is given.
|
|
2015-05-20 |
Wait for process completion and return exit status.
Waits for each process specified by a PID and reports its termination status.
If PID is not given, waits for all currently active child processes,
and the return status is zero. PID must be a process ID.
Exit Status:
Returns the status of the last PID; fails if PID is invalid or an invalid
option is given.
|
|
555. |
Formats and prints ARGUMENTS under control of the FORMAT.
Options:
-v var assign the output to shell variable VAR rather than
display it on the standard output
FORMAT is a character string which contains three types of objects: plain
characters, which are simply copied to standard output; character escape
sequences, which are converted and copied to the standard output; and
format specifications, each of which causes printing of the next successive
argument.
In addition to the standard format specifications described in printf(1),
printf interprets:
%b expand backslash escape sequences in the corresponding argument
%q quote the argument in a way that can be reused as shell input
%(fmt)T output the date-time string resulting from using FMT as a format
string for strftime(3)
The format is re-used as necessary to consume all of the arguments. If
there are fewer arguments than the format requires, extra format
specifications behave as if a zero value or null string, as appropriate,
had been supplied.
Exit Status:
Returns success unless an invalid option is given or a write or assignment
error occurs.
|
|
2015-05-20 |
Formats and prints ARGUMENTS under control of the FORMAT.
Options:
-v var assign the output to shell variable VAR rather than
display it on the standard output
FORMAT is a character string which contains three types of objects: plain
characters, which are simply copied to standard output; character escape
sequences, which are converted and copied to the standard output; and
format specifications, each of which causes printing of the next successive
argument.
In addition to the standard format specifications described in printf(1),
printf interprets:
%b expand backslash escape sequences in the corresponding argument
%q quote the argument in a way that can be reused as shell input
%(fmt)T output the date-time string resulting from using FMT as a format
string for strftime(3)
The format is re-used as necessary to consume all of the arguments. If
there are fewer arguments than the format requires, extra format
specifications behave as if a zero value or null string, as appropriate,
had been supplied.
Exit Status:
Returns success unless an invalid option is given or a write or assignment
error occurs.
|